Hi Simon,
On 2016年07月01日 23:15, Simon Glass wrote:
Hi,
On 30 June 2016 at 23:00, Ziyuan Xu <xzy...@rock-chips.com> wrote:
Hi Simon,
On 2016年06月30日 23:23, Simon Glass wrote:
Hi Ziyuan,
On 30 June 2016 at 00:21, Ziyuan Xu <xzy...@rock-chips.com> wrote:
Redefine RX FIFO size & TX FIFO size for rk3288.
Signed-off-by: Ziyuan Xu <xzy...@rock-chips.com>
---
drivers/usb/gadget/dwc2_udc_otg_regs.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/gadget/dwc2_udc_otg_regs.h
b/drivers/usb/gadget/dwc2_udc_otg_regs.h
index 78ec90e..a0617c8 100644
--- a/drivers/usb/gadget/dwc2_udc_otg_regs.h
+++ b/drivers/usb/gadget/dwc2_udc_otg_regs.h
@@ -130,8 +130,14 @@ struct dwc2_usbotg_reg {
#define HIGH_SPEED_CONTROL_PKT_SIZE 64
#define HIGH_SPEED_BULK_PKT_SIZE 512
+#ifdef CONFIG_ROCKCHIP_RK3288
+#define RX_FIFO_SIZE (275*4)
+#define NPTX_FIFO_SIZE (16*4)
+#else
#define RX_FIFO_SIZE (1024*4)
#define NPTX_FIFO_SIZE (1024*4)
+#endif
I cannot see where this is used. Can you explain? Also can you add a
reason for the change in your commit message?
The total FIFO size of dwc2 on Rockchip SoCs is shorter than the existent, so
redefined
them to fit Rockchip SoCs.
$ git grep RX_FIFO_SIZE
drivers/i2c/kona_i2c.c:#define MAX_RX_FIFO_SIZE 64U /* bytes */
drivers/i2c/kona_i2c.c: unsigned int bytes_to_read = MAX_RX_FIFO_SIZE;
drivers/i2c/kona_i2c.c: if (msg->len - bytes_read <=
MAX_RX_FIFO_SIZE) {
drivers/usb/gadget/dwc2_udc_otg.c: writel(RX_FIFO_SIZE >> 2,
®->grxfsiz);
drivers/usb/gadget/dwc2_udc_otg.c: writel((NPTX_FIFO_SIZE >> 2)
<< 16 | ((RX_FIFO_SIZE >> 2)) << 0,
drivers/usb/gadget/dwc2_udc_otg.c:
((RX_FIFO_SIZE + NPTX_FIFO_SIZE +
drivers/usb/gadget/dwc2_udc_otg_regs.h:#define RX_FIFO_SIZE
(1024*4)
drivers/usb/host/dwc2.c:
writel(CONFIG_DWC2_HOST_RX_FIFO_SIZE, ®s->grxfsiz);
drivers/usb/host/dwc2.c: nptxfifosize |=
CONFIG_DWC2_HOST_RX_FIFO_SIZE <<
drivers/usb/host/dwc2.c: ptxfifosize |=
(CONFIG_DWC2_HOST_RX_FIFO_SIZE +
drivers/usb/host/dwc2.h:#define CONFIG_DWC2_HOST_RX_FIFO_SIZE
(516 + CONFIG_DWC2_MAX_CHANNELS)
If we need a Rockchip-specific value for this then it should go in
Kconfig or device tree.
The macros are only used for dwc2 controller. It seems improper to
rename to be CONFIG_xxxx(ie. CONFIG_RX_FIFO_SIZE) if we move them to
Kconfig.
Besides, usb driver doesn't support device tree, I can't rework it to dt.
+
#define PTX_FIFO_SIZE (1536*1)
#define DEPCTL_TXFNUM_0 (0x0<<22)
--
1.9.1
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot