Hi York,

Thanks for your comments!

> -----Original Message-----
> From: york sun
> Sent: 2016年7月19日 23:46
> To: Zhiqiang Hou <zhiqiang....@nxp.com>; u-boot@lists.denx.de;
> albert.u.b...@aribaud.net; w...@denx.de; Prabhakar Kushwaha
> <prabhakar.kushw...@nxp.com>; alison.w...@freescale.com;
> mingkai...@freescale.com
> Cc: yao.y...@freescale.com; qianyu.g...@freescale.com;
> bmeng...@gmail.com; Shengzhou Liu <shengzhou....@nxp.com>
> Subject: Re: [PATCH 1/5] fsl: serdes: ensure accessing the initialized maps 
> of serdes
> protocol
> 
> On 07/03/2016 11:39 PM, Zhiqiang Hou wrote:
> > From: Hou Zhiqiang <zhiqiang....@nxp.com>
> >
> > Up to now, the function is_serdes_configed() doesn't check if the map
> > of serdes protocol is initialized before accessing it. The function
> > is_serdes_configed() will get wrong result when it was called before
> > the serdes protocol maps initialized. As the first eliment of the map
> 
> s/eliment/element
 
Will fix my spelling mistakes next version, thanks a lot!

> > isn't used for any device, so use it as the flag to indicate if the
> > map has been initialized.
> 
> I am not sure it is safe to presume the first element is always not used. Take
> LS2080A as an example, the serdes map array is initialized by serdes_init(), 
> which
> calls serdes_get_prtcl() to get the index of the array. With normal 
> condition, the
> index shouldn't be zero. Zero is used as an error but it is not checked 
> before setting
> 
> serdes_prtcl_map[lane_prtcl] = 1;
> 

The first element of enum srds_prtcl 'NONE' is aim to describe a lane isn't 
assigned to
any device, and the array serdesn_prtcl_map is used to check if the specified 
device
selected by the current serdes protocol, right? Nobody will check if the device 
'NONE'
has been configured, right? So it can be used to indicate if the 
serdes_prtcl_map has
been initialized.
Don't care whether the function serdes_get_prtcl() will return zero, just focus 
if the
serdes protocol map has been filled. For example, if the serdes protocol value 
read from
RCW doesn't match with any entry of the serdes_cfg_tbl, then all lane will be 
assigned to
'NONE'. It still means the serdes protocol map has been filled, even if there 
is only the
serdesn_prtcl_map[NONE] was set to 1.

> If you presumption is correct, and you want to use the first one as a flag, 
> you
> probably need to check all of them to make sure errors are handled correctly,
> instead of setting the flag unexpected. Also it is important to document this 
> idea
> so future platform code follows the same.
> 

Is it necessary to add it to a document, if add a comment to the 
serdesn_prtcl_map make it?

Thanks,
Zhiqiang
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to