Re: [U-Boot] [PATCH] spi: zynq_spi: Fix infinite looping while xfer

[Jagan Teki]

On 23 June 2016 at 19:28, Lad, Prabhakar <prabhakar.cse...@gmail.com> wrote:
> During spi transfer, for example:
> sspi 1:1.0 8 ff
>
> the rx_len values will  be:
> rx_len = 0
> rx_len = 4294967295
>
> This caused a busy looping during xfer, this patch fixes it
> by adding a check while reading the rx fifo
>
> Signed-off-by: Lad, Prabhakar <prabhakar....@racelogic.co.uk>
> Cc: Michal Simek <michal.si...@xilinx.com>
> Cc: Siva Durga Prasad Paladugu <siva...@xilinx.com>
> Cc: Jagan Teki <jt...@openedev.com>
> ---
>  drivers/spi/zynq_spi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c
> index 09ae1be..dd3de27 100644
> --- a/drivers/spi/zynq_spi.c
> +++ b/drivers/spi/zynq_spi.c
> @@ -230,7 +230,7 @@ static int zynq_spi_xfer(struct udevice *dev,
> unsigned int bitlen,
>
>          /* Read the data from RX FIFO */
>          status = readl(&regs->isr);
> -        while (status & ZYNQ_SPI_IXR_RXNEMPTY_MASK) {
> +        while ((status & ZYNQ_SPI_IXR_RXNEMPTY_MASK) && rx_len) {

Do post-decrement directly on while.

thanks!
-- 
Jagan.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot