I guess I'm not sure what you're saying then; do you want a smaller config? Or something else? Currently bananapi-r1 does not work at all without its own config and .dts file. Do you have a different solution? BTW, I also have kernel dts patches but everything hinges on correctly setting up the ethernet.
https://github.com/VCTLabs/armv7-lpae-multiplatform Basically, I really only care that all this stuff works (especially the ethernet on a board with a switch chip) - okay, that plus sata dts tweaks and a good quality usb cable for stable power. Without changing that GMAC delay parameter, you get something that looks like it should work, but only a handful of packets ever actually make it from one end to the other. Steve On Sun, Oct 2, 2016 at 11:04 AM, Jagan Teki <jagannadh.t...@gmail.com> wrote: > On Sun, Oct 2, 2016 at 11:26 PM, Stephen Arnold > <stephen.arnol...@gmail.com> wrote: >> It can't. Ethernet and USB are both fubar'd using lamobo-r1 on >> bananapi-r1. Mainly the GMAC delay is different, If you buy one and >> test it, you will find that they are definitely *not* compatible. >> Period. > > I taking about the CONFIG_* entries which is used in defconfig, dts is > fine anyway we need it as a separate. > > -- > Jagan Teki > Free Software Engineer | www.openedev.com > U-Boot, Linux | Upstream Maintainer > Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot