Hi Patrick, I see a couple of small issues by merging this:
On 28/09/2016 17:46, linux-kernel-...@beckhoff.com wrote: > From: Patrick Bruenn <p.bru...@beckhoff.com> > > Add CX9020 board based on mx53loco. > Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse > serial_mxc with DTE and prepare for device tree migration of other > functions and imx53 devices. > > The CX9020 differs from i.MX53 Quick Start Board by: > - use uart2 instead of uart1 > - DVI-D connector instead of VGA > - no audio > - CCAT FPGA connected to emi > - enable rtc > > Signed-off-by: Patrick Bruenn <p.bru...@beckhoff.com> > > --- CONFIG_CMD_CCAT: you add an own CONFIG_, and all CONFIG_ should be selected via Kconfig. This generates a build error for your board. > +++ b/board/beckhoff/mx53cx9020/mx53cx9020.c > @@ -0,0 +1,564 @@ > +/* > + * Copyright (C) 2015 Beckhoff Automation GmbH & Co. KG > + * Patrick Bruenn <p.bru...@beckhoff.com> > + * > + * Based on Freescale's Linux i.MX mx53loco.c file: > + * Copyright (C) 2011 Freescale Semiconductor, Inc. > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > +#include <common.h> > +#include <asm/io.h> > +#include <asm/arch/imx-regs.h> > +#include <asm/arch/sys_proto.h> > +#include <asm/arch/crm_regs.h> > +#include <asm/arch/clock.h> > +#include <asm/arch/iomux-mx53.h> > +#include <asm/arch/clock.h> > +#include <asm/errno.h> This is not found and you do not need it (tested with gcc 5.4). If you rely on toolchain's header, you can drop it. This generates a build error as well. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot