- Proper tabs spaces
- Removed unnecessary
- Added meaningful comments
Cc: Simon Glass <s...@chromium.org>
Cc: Bin Meng <bmeng...@gmail.com>
Cc: York Sun <york....@nxp.com>
Cc: Vignesh R <vigne...@ti.com>
Cc: Mugunthan V N <mugunthan...@ti.com>
Cc: Michal Simek <michal.si...@xilinx.com>
Cc: Siva Durga Prasad Paladugu <siva...@xilinx.com>
Signed-off-by: Jagan Teki <ja...@openedev.com>
---
drivers/mtd/spi/sf_internal.h | 22 ++++++++--------------
1 file changed, 8 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index a9455ac..71feba9 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -108,17 +108,8 @@ int sst_write_bp(struct spi_flash *flash, u32 offset,
size_t len,
#define JEDEC_ID(info) (((info)->id[1]) << 8 | ((info)->id[2]))
#define JEDEC_EXT(info) (((info)->id[3]) << 8 | ((info)->id[4]))
-/**
- * struct spi_flash_info - SPI/QSPI flash device params structure
- *
- * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
- * @sector_size: Isn't necessarily a sector size from vendor,
- * the size listed here is what works with CMD_ERASE_64K
- * @nr_sectors: No.of sectors on this device
- * @flags: Important param, for flash specific behaviour
- */
struct spi_flash_info {
- const char *name;
+ const char *name;
/*
* This array stores the ID bytes.
@@ -128,12 +119,15 @@ struct spi_flash_info {
u8 id[5];
u8 id_len;
- u32 sector_size;
- u32 nr_sectors;
+ /* The size listed here is what works with SPINOR_OP_SE, which isn't
+ * necessarily called a "sector" by the vendor.
+ */
+ u32 sector_size;
+ u32 nr_sectors;
- u16 page_size;
+ u16 page_size;
- u16 flags;
+ u16 flags;
#define SECT_4K BIT(0)
#define E_FSR BIT(1)
#define SST_WR BIT(2)
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
