On Tue, 8 Nov 2016 17:21:15 +0100 Maxime Ripard <maxime.rip...@free-electrons.com> wrote:
> The SPL image needs to be built with a different ECC configuration than the > U-Boot binary. > > Add Kconfig options with defaults to provide a value that should work for > anyone, but is still configurable if needs be. > > Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com> Acked-by: Boris Brezillon <boris.brezil...@free-electrons.com> > --- > drivers/mtd/nand/Kconfig | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+), 0 deletions(-) > > diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig > index df154bfd32b9..a60abb625ee5 100644 > --- a/drivers/mtd/nand/Kconfig > +++ b/drivers/mtd/nand/Kconfig > @@ -73,6 +73,22 @@ config NAND_SUNXI > The SPL driver only supports reading from the NAND using DMA > transfers. > > +if NAND_SUNXI > + > +config NAND_SUNXI_SPL_ECC_STRENGTH > + int "Allwinner NAND SPL ECC Strength" > + default 64 > + > +config NAND_SUNXI_SPL_ECC_SIZE > + int "Allwinner NAND SPL ECC Step Size" > + default 1024 > + > +config NAND_SUNXI_SPL_USABLE_PAGE_SIZE > + int "Allwinner NAND SPL Usable Page Size" > + default 1024 > + > +endif > + > config NAND_ARASAN > bool "Configure Arasan Nand" > help _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot