Hi,
On 08-11-16 17:21, Maxime Ripard wrote:
Introduce a new sunxi-spl-with-ecc.bin image with already the right header,
ECC, randomizer and padding for the BROM to be able to read it.
It needs to be flashed using a raw access to the NAND so that the
controller doesn't change a thing to it, since we already have all the
right parameters.
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
Looks good to me:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Regards,
Hans
---
Makefile | 3 +++
scripts/Makefile.spl | 12 ++++++++++++
2 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/Makefile b/Makefile
index 37cbcb28f75e..12a248e297b5 100644
--- a/Makefile
+++ b/Makefile
@@ -1345,6 +1345,9 @@ spl/u-boot-spl: tools prepare \
spl/sunxi-spl.bin: spl/u-boot-spl
@:
+spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
+ @:
+
spl/u-boot-spl.sfp: spl/u-boot-spl
@:
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index e0b0117dc9b6..b41b4e427cc5 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -168,6 +168,7 @@ endif
ifdef CONFIG_ARCH_SUNXI
ALL-y += $(obj)/sunxi-spl.bin
+ALL-y += $(obj)/sunxi-spl-with-ecc.bin
endif
ifeq ($(CONFIG_SYS_SOC),"at91")
@@ -276,6 +277,17 @@ cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE
$(call if_changed,mksunxiboot)
+quiet_cmd_sunxi_spl_image_builder = SUNXI_SPL_IMAGE_BUILDER $@
+cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \
+ -c
$(CONFIG_NAND_SUNXI_SPL_ECC_STRENGTH)/$(CONFIG_NAND_SUNXI_SPL_ECC_SIZE) \
+ -p $(CONFIG_SYS_NAND_PAGE_SIZE) \
+ -o $(CONFIG_SYS_NAND_OOBSIZE) \
+ -u $(CONFIG_NAND_SUNXI_SPL_USABLE_PAGE_SIZE) \
+ -e $(CONFIG_SYS_NAND_BLOCK_SIZE) \
+ -s -b $< $@
+$(obj)/sunxi-spl-with-ecc.bin: $(obj)/sunxi-spl.bin
+ $(call if_changed,sunxi_spl_image_builder)
+
# Rule to link u-boot-spl
# May be overridden by arch/$(ARCH)/config.mk
quiet_cmd_u-boot-spl ?= LD $@
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
