On 11/02/2016 11:23 PM, feng.l...@nxp.com wrote: > From: Feng Li <feng.l...@nxp.com> > > The patch add support ls1021a-iot. > It supports I2C, MMC, PCIe, eTSEC, SATA, > EEPROM, CPLD, HDMI, Serial port, HXCI, > DSPI, SD boot, QSPI boot, Broadcom wifi > card, QCA wifi card.
You wrapped too short. You already have a README file describing what is supported. I don't think it is necessary to put in the commit message. I will change it to "The patch adds support for Freescale ls1021a-iot board.". If you don't repin this patch for other reason, no action is needed from you. > > Signed-off-by: Feng Li <feng.l...@nxp.com> > Cc: York Sun <york....@nxp.com> > Cc: Alison Wang <alison.w...@nxp.com> > --- > Changes for V2: > - CPU_V7_HAS_NONSEC and CPU_V7_HAS_VIRT are moved to Kconfig > to correctly select ARMV7_PSCI. > - CONFIG_ARMV7_PSCI_1_0 and CONFIG_ARMV7_PSCI_GTE_1_0 are > deleted. > > arch/arm/Kconfig | 15 + > arch/arm/dts/Makefile | 3 +- > arch/arm/dts/ls1021a-iot-duart.dts | 16 ++ > arch/arm/dts/ls1021a-iot.dtsi | 103 +++++++ > board/freescale/ls1021aiot/Kconfig | 15 + > board/freescale/ls1021aiot/MAINTAINERS | 7 + > board/freescale/ls1021aiot/Makefile | 9 + > board/freescale/ls1021aiot/README | 58 ++++ > board/freescale/ls1021aiot/dcu.c | 47 ++++ > board/freescale/ls1021aiot/ls1021aiot.c | 259 +++++++++++++++++ > board/freescale/ls1021aiot/ls102xa_pbi.cfg | 14 + > board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg | 27 ++ > board/freescale/ls1021aiot/psci.S | 28 ++ > configs/ls1021aiot_qspi_defconfig | 15 + > configs/ls1021aiot_sdcard_defconfig | 17 ++ > include/configs/ls1021aiot.h | 367 > +++++++++++++++++++++++++ > 16 files changed, 999 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/dts/ls1021a-iot-duart.dts > create mode 100644 arch/arm/dts/ls1021a-iot.dtsi > create mode 100644 board/freescale/ls1021aiot/Kconfig > create mode 100644 board/freescale/ls1021aiot/MAINTAINERS > create mode 100644 board/freescale/ls1021aiot/Makefile > create mode 100644 board/freescale/ls1021aiot/README > create mode 100644 board/freescale/ls1021aiot/dcu.c > create mode 100644 board/freescale/ls1021aiot/ls1021aiot.c > create mode 100644 board/freescale/ls1021aiot/ls102xa_pbi.cfg > create mode 100644 board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg > create mode 100644 board/freescale/ls1021aiot/psci.S > create mode 100644 configs/ls1021aiot_qspi_defconfig > create mode 100644 configs/ls1021aiot_sdcard_defconfig > create mode 100644 include/configs/ls1021aiot.h > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index d7a9b11..5a46ad4 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -761,6 +761,20 @@ config TARGET_LS1021ATWR > select ARCH_SUPPORT_PSCI > select LS1_DEEP_SLEEP > > +config TARGET_LS1021AIOT You should use a space instead of a tab here. It causes a false alarm when compiling. I will fix this when merging. No action is needed from you. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
