On Wed, Nov 23, 2016 at 07:28:16PM +0100, Jelle van der Waa wrote: > Introduce a new CONFIG_SATAPWR Kconfig option to replace the > option in CONFIG_SYS_EXTRA_OPTIONS. > > Signed-off-by: Jelle van der Waa <je...@vdwaa.nl> > --- > board/sunxi/Kconfig | 7 +++++++ > board/sunxi/board.c | 11 ++++++----- > configs/A10-OLinuXino-Lime_defconfig | 3 ++- > configs/A20-OLinuXino-Lime2_defconfig | 3 ++- > configs/A20-OLinuXino-Lime_defconfig | 3 ++- > configs/A20-OLinuXino_MICRO_defconfig | 3 ++- > configs/A20-Olimex-SOM-EVB_defconfig | 3 ++- > configs/Cubieboard2_defconfig | 3 ++- > configs/Cubieboard_defconfig | 3 ++- > configs/Cubietruck_defconfig | 3 ++- > configs/Itead_Ibox_A20_defconfig | 3 ++- > configs/Lamobo_R1_defconfig | 3 ++- > configs/Linksprite_pcDuino3_Nano_defconfig | 3 ++- > configs/Linksprite_pcDuino3_defconfig | 3 ++- > configs/Sinovoip_BPI_M3_defconfig | 2 +- > configs/orangepi_plus_defconfig | 3 ++- > 16 files changed, 40 insertions(+), 19 deletions(-) > > diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig > index ae2fba1..fe2f7b4 100644 > --- a/board/sunxi/Kconfig > +++ b/board/sunxi/Kconfig > @@ -667,6 +667,13 @@ config GMAC_TX_DELAY > ---help--- > Set the GMAC Transmit Clock Delay Chain value. > > +config SATAPWR > + string "power pin for SATA" > + default "" > + ---help--- > + Set the power pin for SATA. This takes a string in the format > + understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. > +
This looks like a rather generic option. Can't this be in drivers/block instead? Thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot