Hi,
On 24-11-16 22:22, Maxime Ripard wrote:
On Wed, Nov 23, 2016 at 07:28:16PM +0100, Jelle van der Waa wrote:
Introduce a new CONFIG_SATAPWR Kconfig option to replace the
option in CONFIG_SYS_EXTRA_OPTIONS.
Signed-off-by: Jelle van der Waa <je...@vdwaa.nl>
---
board/sunxi/Kconfig | 7 +++++++
board/sunxi/board.c | 11 ++++++-----
configs/A10-OLinuXino-Lime_defconfig | 3 ++-
configs/A20-OLinuXino-Lime2_defconfig | 3 ++-
configs/A20-OLinuXino-Lime_defconfig | 3 ++-
configs/A20-OLinuXino_MICRO_defconfig | 3 ++-
configs/A20-Olimex-SOM-EVB_defconfig | 3 ++-
configs/Cubieboard2_defconfig | 3 ++-
configs/Cubieboard_defconfig | 3 ++-
configs/Cubietruck_defconfig | 3 ++-
configs/Itead_Ibox_A20_defconfig | 3 ++-
configs/Lamobo_R1_defconfig | 3 ++-
configs/Linksprite_pcDuino3_Nano_defconfig | 3 ++-
configs/Linksprite_pcDuino3_defconfig | 3 ++-
configs/Sinovoip_BPI_M3_defconfig | 2 +-
configs/orangepi_plus_defconfig | 3 ++-
16 files changed, 40 insertions(+), 19 deletions(-)
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index ae2fba1..fe2f7b4 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -667,6 +667,13 @@ config GMAC_TX_DELAY
---help---
Set the GMAC Transmit Clock Delay Chain value.
+config SATAPWR
+ string "power pin for SATA"
+ default ""
+ ---help---
+ Set the power pin for SATA. This takes a string in the format
+ understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
This looks like a rather generic option. Can't this be in
drivers/block instead?
The proper solution would be to get the info from devicetree,
which requires regulator support, which we don't have yet
for sunxi. In the mean time getting rid of the need for
CONFIG_SYS_EXTRA_OPTIONS is a worthwhile goal in itself
IMHO.
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
