From: Stefan Agner <stefan.ag...@toradex.com>
This converts the following to Kconfig:
CONFIG_SPL_RAM_DEVICE
Signed-off-by: Stefan Agner <stefan.ag...@toradex.com>
---
Changes in v3: None
Changes in v2: None
common/spl/Kconfig | 9 +++++++++
include/configs/microblaze-generic.h | 1 -
include/configs/socfpga_common.h | 1 -
include/configs/tegra-common.h | 1 -
include/configs/xilinx_zynqmp.h | 1 -
include/configs/zynq-common.h | 1 -
6 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index cba51f5df6..ea084f462b 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -449,6 +449,15 @@ config SPL_POWER_SUPPORT
in drivers/power, drivers/power/pmic and drivers/power/regulator
as part of an SPL build.
+config SPL_RAM_DEVICE
+ bool "Support booting from preloaded image in RAM"
+ depends on SPL
+ default y if MICROBLAZE || ARCH_SOCFPGA || TEGRA || ARCH_ZYNQ
+ help
+ Enable booting of an image already loaded in RAM. The image has to
+ be already in memory when SPL takes over, e.g. loaded by the boot
+ ROM.
+
config SPL_SATA_SUPPORT
bool "Support loading from SATA"
depends on SPL
diff --git a/include/configs/microblaze-generic.h
b/include/configs/microblaze-generic.h
index 7abffdb2ef..cc90b73fa1 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -284,7 +284,6 @@
#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds"
-#define CONFIG_SPL_RAM_DEVICE
#ifdef CONFIG_SYS_FLASH_BASE
# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE
#endif
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 58a6550844..7292469433 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -309,7 +309,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
* 0xFFFF_FF00 ...... End of SRAM
*/
#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
#define CONFIG_SPL_MAX_SIZE (64 * 1024)
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 23a0e782e0..f30fec84a2 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -98,7 +98,6 @@
/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_TEXT_BASE - \
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index fb4f6d6806..8845ff425d 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -260,7 +260,6 @@
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_RAM_DEVICE
/* u-boot is like dtb */
#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 953e7311a6..e04be5c18c 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -296,7 +296,6 @@
#define CONFIG_CMD_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-zynq/u-boot-spl.lds"
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
