Restructure clock manager driver in the preparation to support A10.
Move the Gen5 specific code to _gen5 files. No functional change.
Change all uint32_t to u32 and change to use macro BIT(n) for bit shift.
Signed-off-by: Ley Foon Tan <ley.foon....@intel.com>
---
arch/arm/mach-socfpga/Makefile | 3 +-
arch/arm/mach-socfpga/clock_manager.c | 496 +--------------------
arch/arm/mach-socfpga/clock_manager_gen5.c | 495 ++++++++++++++++++++
arch/arm/mach-socfpga/include/mach/clock_manager.h | 311 +------------
.../mach-socfpga/include/mach/clock_manager_gen5.h | 322 +++++++++++++
5 files changed, 830 insertions(+), 797 deletions(-)
create mode 100755 arch/arm/mach-socfpga/clock_manager_gen5.c
create mode 100644 arch/arm/mach-socfpga/include/mach/clock_manager_gen5.h
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 809cd47..b76de4c 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -13,7 +13,8 @@ obj-y += misc.o timer.o reset_manager.o system_manager.o
clock_manager.o \
obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
# QTS-generated config file wrappers
-obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += scan_manager.o wrap_pll_config.o
+obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += scan_manager.o wrap_pll_config.o \
+ clock_manager_gen5.o
obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o \
wrap_sdram_config.o
CFLAGS_wrap_iocsr_config.o += -I$(srctree)/board/$(BOARDDIR)
diff --git a/arch/arm/mach-socfpga/clock_manager.c
b/arch/arm/mach-socfpga/clock_manager.c
index 29e18f8..d675973 100644
--- a/arch/arm/mach-socfpga/clock_manager.c
+++ b/arch/arm/mach-socfpga/clock_manager.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -13,10 +13,10 @@ DECLARE_GLOBAL_DATA_PTR;
static const struct socfpga_clock_manager *clock_manager_base =
(struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
-static void cm_wait_for_lock(uint32_t mask)
+void cm_wait_for_lock(u32 mask)
{
- register uint32_t inter_val;
- uint32_t retry = 0;
+ register u32 inter_val;
+ u32 retry = 0;
do {
inter_val = readl(&clock_manager_base->inter) & mask;
if (inter_val == mask)
@@ -29,498 +29,12 @@ static void cm_wait_for_lock(uint32_t mask)
}
/* function to poll in the fsm busy bit */
-static void cm_wait_for_fsm(void)
+void cm_wait_for_fsm(void)
{
while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
;
}
-/*
- * function to write the bypass register which requires a poll of the
- * busy bit
- */
-static void cm_write_bypass(uint32_t val)
-{
- writel(val, &clock_manager_base->bypass);
- cm_wait_for_fsm();
-}
-
-/* function to write the ctrl register which requires a poll of the busy bit */
-static void cm_write_ctrl(uint32_t val)
-{
- writel(val, &clock_manager_base->ctrl);
- cm_wait_for_fsm();
-}
-
-/* function to write a clock register that has phase information */
-static void cm_write_with_phase(uint32_t value,
- uint32_t reg_address, uint32_t mask)
-{
- /* poll until phase is zero */
- while (readl(reg_address) & mask)
- ;
-
- writel(value, reg_address);
-
- while (readl(reg_address) & mask)
- ;
-}
-
-/*
- * Setup clocks while making no assumptions about previous state of the clocks.
- *
- * Start by being paranoid and gate all sw managed clocks
- * Put all plls in bypass
- * Put all plls VCO registers back to reset value (bandgap power down).
- * Put peripheral and main pll src to reset value to avoid glitch.
- * Delay 5 us.
- * Deassert bandgap power down and set numerator and denominator
- * Start 7 us timer.
- * set internal dividers
- * Wait for 7 us timer.
- * Enable plls
- * Set external dividers while plls are locking
- * Wait for pll lock
- * Assert/deassert outreset all.
- * Take all pll's out of bypass
- * Clear safe mode
- * set source main and peripheral clocks
- * Ungate clocks
- */
-
-void cm_basic_init(const struct cm_config * const cfg)
-{
- unsigned long end;
-
- /* Start by being paranoid and gate all sw managed clocks */
-
- /*
- * We need to disable nandclk
- * and then do another apb access before disabling
- * gatting off the rest of the periperal clocks.
- */
- writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
- readl(&clock_manager_base->per_pll.en),
- &clock_manager_base->per_pll.en);
-
- /* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
- writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
- CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
- CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
- CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
- CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
- CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
- &clock_manager_base->main_pll.en);
-
- writel(0, &clock_manager_base->sdr_pll.en);
-
- /* now we can gate off the rest of the peripheral clocks */
- writel(0, &clock_manager_base->per_pll.en);
-
- /* Put all plls in bypass */
- cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL |
- CLKMGR_BYPASS_MAINPLL);
-
- /* Put all plls VCO registers back to reset value. */
- writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE &
- ~CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
- &clock_manager_base->main_pll.vco);
- writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE &
- ~CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
- &clock_manager_base->per_pll.vco);
- writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE &
- ~CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
- &clock_manager_base->sdr_pll.vco);
-
- /*
- * The clocks to the flash devices and the L4_MAIN clocks can
- * glitch when coming out of safe mode if their source values
- * are different from their reset value. So the trick it to
- * put them back to their reset state, and change input
- * after exiting safe mode but before ungating the clocks.
- */
- writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
- &clock_manager_base->per_pll.src);
- writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
- &clock_manager_base->main_pll.l4src);
-
- /* read back for the required 5 us delay. */
- readl(&clock_manager_base->main_pll.vco);
- readl(&clock_manager_base->per_pll.vco);
- readl(&clock_manager_base->sdr_pll.vco);
-
-
- /*
- * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
- * with numerator and denominator.
- */
- writel(cfg->main_vco_base, &clock_manager_base->main_pll.vco);
- writel(cfg->peri_vco_base, &clock_manager_base->per_pll.vco);
- writel(cfg->sdram_vco_base, &clock_manager_base->sdr_pll.vco);
-
- /*
- * Time starts here. Must wait 7 us from
- * BGPWRDN_SET(0) to VCO_ENABLE_SET(1).
- */
- end = timer_get_us() + 7;
-
- /* main mpu */
- writel(cfg->mpuclk, &clock_manager_base->main_pll.mpuclk);
-
- /* altera group mpuclk */
- writel(cfg->altera_grp_mpuclk, &clock_manager_base->altera.mpuclk);
-
- /* main main clock */
- writel(cfg->mainclk, &clock_manager_base->main_pll.mainclk);
-
- /* main for dbg */
- writel(cfg->dbgatclk, &clock_manager_base->main_pll.dbgatclk);
-
- /* main for cfgs2fuser0clk */
- writel(cfg->cfg2fuser0clk,
- &clock_manager_base->main_pll.cfgs2fuser0clk);
-
- /* Peri emac0 50 MHz default to RMII */
- writel(cfg->emac0clk, &clock_manager_base->per_pll.emac0clk);
-
- /* Peri emac1 50 MHz default to RMII */
- writel(cfg->emac1clk, &clock_manager_base->per_pll.emac1clk);
-
- /* Peri QSPI */
- writel(cfg->mainqspiclk, &clock_manager_base->main_pll.mainqspiclk);
-
- writel(cfg->perqspiclk, &clock_manager_base->per_pll.perqspiclk);
-
- /* Peri pernandsdmmcclk */
- writel(cfg->mainnandsdmmcclk,
- &clock_manager_base->main_pll.mainnandsdmmcclk);
-
- writel(cfg->pernandsdmmcclk,
- &clock_manager_base->per_pll.pernandsdmmcclk);
-
- /* Peri perbaseclk */
- writel(cfg->perbaseclk, &clock_manager_base->per_pll.perbaseclk);
-
- /* Peri s2fuser1clk */
- writel(cfg->s2fuser1clk, &clock_manager_base->per_pll.s2fuser1clk);
-
- /* 7 us must have elapsed before we can enable the VCO */
- while (timer_get_us() < end)
- ;
-
- /* Enable vco */
- /* main pll vco */
- writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
- &clock_manager_base->main_pll.vco);
-
- /* periferal pll */
- writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
- &clock_manager_base->per_pll.vco);
-
- /* sdram pll vco */
- writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
- &clock_manager_base->sdr_pll.vco);
-
- /* L3 MP and L3 SP */
- writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv);
-
- writel(cfg->dbgdiv, &clock_manager_base->main_pll.dbgdiv);
-
- writel(cfg->tracediv, &clock_manager_base->main_pll.tracediv);
-
- /* L4 MP, L4 SP, can0, and can1 */
- writel(cfg->perdiv, &clock_manager_base->per_pll.div);
-
- writel(cfg->gpiodiv, &clock_manager_base->per_pll.gpiodiv);
-
-#define LOCKED_MASK \
- (CLKMGR_INTER_SDRPLLLOCKED_MASK | \
- CLKMGR_INTER_PERPLLLOCKED_MASK | \
- CLKMGR_INTER_MAINPLLLOCKED_MASK)
-
- cm_wait_for_lock(LOCKED_MASK);
-
- /* write the sdram clock counters before toggling outreset all */
- writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
- &clock_manager_base->sdr_pll.ddrdqsclk);
-
- writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
- &clock_manager_base->sdr_pll.ddr2xdqsclk);
-
- writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
- &clock_manager_base->sdr_pll.ddrdqclk);
-
- writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
- &clock_manager_base->sdr_pll.s2fuser2clk);
-
- /*
- * after locking, but before taking out of bypass
- * assert/deassert outresetall
- */
- uint32_t mainvco = readl(&clock_manager_base->main_pll.vco);
-
- /* assert main outresetall */
- writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
- &clock_manager_base->main_pll.vco);
-
- uint32_t periphvco = readl(&clock_manager_base->per_pll.vco);
-
- /* assert pheriph outresetall */
- writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
- &clock_manager_base->per_pll.vco);
-
- /* assert sdram outresetall */
- writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN|
- CLKMGR_SDRPLLGRP_VCO_OUTRESETALL,
- &clock_manager_base->sdr_pll.vco);
-
- /* deassert main outresetall */
- writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
- &clock_manager_base->main_pll.vco);
-
- /* deassert pheriph outresetall */
- writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
- &clock_manager_base->per_pll.vco);
-
- /* deassert sdram outresetall */
- writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
- &clock_manager_base->sdr_pll.vco);
-
- /*
- * now that we've toggled outreset all, all the clocks
- * are aligned nicely; so we can change any phase.
- */
- cm_write_with_phase(cfg->ddrdqsclk,
- (uint32_t)&clock_manager_base->sdr_pll.ddrdqsclk,
- CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
-
- /* SDRAM DDR2XDQSCLK */
- cm_write_with_phase(cfg->ddr2xdqsclk,
- (uint32_t)&clock_manager_base->sdr_pll.ddr2xdqsclk,
- CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
-
- cm_write_with_phase(cfg->ddrdqclk,
- (uint32_t)&clock_manager_base->sdr_pll.ddrdqclk,
- CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
-
- cm_write_with_phase(cfg->s2fuser2clk,
- (uint32_t)&clock_manager_base->sdr_pll.s2fuser2clk,
- CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
-
- /* Take all three PLLs out of bypass when safe mode is cleared. */
- cm_write_bypass(0);
-
- /* clear safe mode */
- cm_write_ctrl(readl(&clock_manager_base->ctrl) | CLKMGR_CTRL_SAFEMODE);
-
- /*
- * now that safe mode is clear with clocks gated
- * it safe to change the source mux for the flashes the the L4_MAIN
- */
- writel(cfg->persrc, &clock_manager_base->per_pll.src);
- writel(cfg->l4src, &clock_manager_base->main_pll.l4src);
-
- /* Now ungate non-hw-managed clocks */
- writel(~0, &clock_manager_base->main_pll.en);
- writel(~0, &clock_manager_base->per_pll.en);
- writel(~0, &clock_manager_base->sdr_pll.en);
-
- /* Clear the loss of lock bits (write 1 to clear) */
- writel(CLKMGR_INTER_SDRPLLLOST_MASK | CLKMGR_INTER_PERPLLLOST_MASK |
- CLKMGR_INTER_MAINPLLLOST_MASK,
- &clock_manager_base->inter);
-}
-
-static unsigned int cm_get_main_vco_clk_hz(void)
-{
- uint32_t reg, clock;
-
- /* get the main VCO clock */
- reg = readl(&clock_manager_base->main_pll.vco);
- clock = cm_get_osc_clk_hz(1);
- clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
- CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
- clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
- CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
-
- return clock;
-}
-
-static unsigned int cm_get_per_vco_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify PER PLL clock source */
- reg = readl(&clock_manager_base->per_pll.vco);
- reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
- CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
- if (reg == CLKMGR_VCO_SSRC_EOSC1)
- clock = cm_get_osc_clk_hz(1);
- else if (reg == CLKMGR_VCO_SSRC_EOSC2)
- clock = cm_get_osc_clk_hz(2);
- else if (reg == CLKMGR_VCO_SSRC_F2S)
- clock = cm_get_f2s_per_ref_clk_hz();
-
- /* get the PER VCO clock */
- reg = readl(&clock_manager_base->per_pll.vco);
- clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
- CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
- clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
- CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
-
- return clock;
-}
-
-unsigned long cm_get_mpu_clk_hz(void)
-{
- uint32_t reg, clock;
-
- clock = cm_get_main_vco_clk_hz();
-
- /* get the MPU clock */
- reg = readl(&clock_manager_base->altera.mpuclk);
- clock /= (reg + 1);
- reg = readl(&clock_manager_base->main_pll.mpuclk);
- clock /= (reg + 1);
- return clock;
-}
-
-unsigned long cm_get_sdram_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify SDRAM PLL clock source */
- reg = readl(&clock_manager_base->sdr_pll.vco);
- reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >>
- CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET;
- if (reg == CLKMGR_VCO_SSRC_EOSC1)
- clock = cm_get_osc_clk_hz(1);
- else if (reg == CLKMGR_VCO_SSRC_EOSC2)
- clock = cm_get_osc_clk_hz(2);
- else if (reg == CLKMGR_VCO_SSRC_F2S)
- clock = cm_get_f2s_sdr_ref_clk_hz();
-
- /* get the SDRAM VCO clock */
- reg = readl(&clock_manager_base->sdr_pll.vco);
- clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >>
- CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1;
- clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >>
- CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1;
-
- /* get the SDRAM (DDR_DQS) clock */
- reg = readl(&clock_manager_base->sdr_pll.ddrdqsclk);
- reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >>
- CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET;
- clock /= (reg + 1);
-
- return clock;
-}
-
-unsigned int cm_get_l4_sp_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify the source of L4 SP clock */
- reg = readl(&clock_manager_base->main_pll.l4src);
- reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>
- CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET;
-
- if (reg == CLKMGR_L4_SP_CLK_SRC_MAINPLL) {
- clock = cm_get_main_vco_clk_hz();
-
- /* get the clock prior L4 SP divider (main clk) */
- reg = readl(&clock_manager_base->altera.mainclk);
- clock /= (reg + 1);
- reg = readl(&clock_manager_base->main_pll.mainclk);
- clock /= (reg + 1);
- } else if (reg == CLKMGR_L4_SP_CLK_SRC_PERPLL) {
- clock = cm_get_per_vco_clk_hz();
-
- /* get the clock prior L4 SP divider (periph_base_clk) */
- reg = readl(&clock_manager_base->per_pll.perbaseclk);
- clock /= (reg + 1);
- }
-
- /* get the L4 SP clock which supplied to UART */
- reg = readl(&clock_manager_base->main_pll.maindiv);
- reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
- CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
- clock = clock / (1 << reg);
-
- return clock;
-}
-
-unsigned int cm_get_mmc_controller_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify the source of MMC clock */
- reg = readl(&clock_manager_base->per_pll.src);
- reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
- CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
-
- if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
- clock = cm_get_f2s_per_ref_clk_hz();
- } else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
- clock = cm_get_main_vco_clk_hz();
-
- /* get the SDMMC clock */
- reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
- clock /= (reg + 1);
- } else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
- clock = cm_get_per_vco_clk_hz();
-
- /* get the SDMMC clock */
- reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk);
- clock /= (reg + 1);
- }
-
- /* further divide by 4 as we have fixed divider at wrapper */
- clock /= 4;
- return clock;
-}
-
-unsigned int cm_get_qspi_controller_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- /* identify the source of QSPI clock */
- reg = readl(&clock_manager_base->per_pll.src);
- reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
- CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
-
- if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
- clock = cm_get_f2s_per_ref_clk_hz();
- } else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
- clock = cm_get_main_vco_clk_hz();
-
- /* get the qspi clock */
- reg = readl(&clock_manager_base->main_pll.mainqspiclk);
- clock /= (reg + 1);
- } else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
- clock = cm_get_per_vco_clk_hz();
-
- /* get the qspi clock */
- reg = readl(&clock_manager_base->per_pll.perqspiclk);
- clock /= (reg + 1);
- }
-
- return clock;
-}
-
-unsigned int cm_get_spi_controller_clk_hz(void)
-{
- uint32_t reg, clock = 0;
-
- clock = cm_get_per_vco_clk_hz();
-
- /* get the clock prior L4 SP divider (periph_base_clk) */
- reg = readl(&clock_manager_base->per_pll.perbaseclk);
- clock /= (reg + 1);
-
- return clock;
-}
-
static void cm_print_clock_quick_summary(void)
{
printf("MPU %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
diff --git a/arch/arm/mach-socfpga/clock_manager_gen5.c
b/arch/arm/mach-socfpga/clock_manager_gen5.c
new file mode 100755
index 0000000..1df2ed4
--- /dev/null
+++ b/arch/arm/mach-socfpga/clock_manager_gen5.c
@@ -0,0 +1,495 @@
+/*
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock_manager.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_clock_manager *clock_manager_base =
+ (struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
+
+/*
+ * function to write the bypass register which requires a poll of the
+ * busy bit
+ */
+static void cm_write_bypass(u32 val)
+{
+ writel(val, &clock_manager_base->bypass);
+ cm_wait_for_fsm();
+}
+
+/* function to write the ctrl register which requires a poll of the busy bit */
+static void cm_write_ctrl(u32 val)
+{
+ writel(val, &clock_manager_base->ctrl);
+ cm_wait_for_fsm();
+}
+
+/* function to write a clock register that has phase information */
+static void cm_write_with_phase(u32 value,
+ u32 reg_address, u32 mask)
+{
+ /* poll until phase is zero */
+ while (readl(reg_address) & mask)
+ ;
+
+ writel(value, reg_address);
+
+ while (readl(reg_address) & mask)
+ ;
+}
+
+/*
+ * Setup clocks while making no assumptions about previous state of the clocks.
+ *
+ * Start by being paranoid and gate all sw managed clocks
+ * Put all plls in bypass
+ * Put all plls VCO registers back to reset value (bandgap power down).
+ * Put peripheral and main pll src to reset value to avoid glitch.
+ * Delay 5 us.
+ * Deassert bandgap power down and set numerator and denominator
+ * Start 7 us timer.
+ * set internal dividers
+ * Wait for 7 us timer.
+ * Enable plls
+ * Set external dividers while plls are locking
+ * Wait for pll lock
+ * Assert/deassert outreset all.
+ * Take all pll's out of bypass
+ * Clear safe mode
+ * set source main and peripheral clocks
+ * Ungate clocks
+ */
+
+void cm_basic_init(const struct cm_config * const cfg)
+{
+ unsigned long end;
+
+ /* Start by being paranoid and gate all sw managed clocks */
+
+ /*
+ * We need to disable nandclk
+ * and then do another apb access before disabling
+ * gatting off the rest of the periperal clocks.
+ */
+ writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
+ readl(&clock_manager_base->per_pll.en),
+ &clock_manager_base->per_pll.en);
+
+ /* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
+ writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
+ CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
+ &clock_manager_base->main_pll.en);
+
+ writel(0, &clock_manager_base->sdr_pll.en);
+
+ /* now we can gate off the rest of the peripheral clocks */
+ writel(0, &clock_manager_base->per_pll.en);
+
+ /* Put all plls in bypass */
+ cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL |
+ CLKMGR_BYPASS_MAINPLL);
+
+ /* Put all plls VCO registers back to reset value. */
+ writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE &
+ ~CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
+ &clock_manager_base->main_pll.vco);
+ writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE &
+ ~CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
+ &clock_manager_base->per_pll.vco);
+ writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE &
+ ~CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
+ &clock_manager_base->sdr_pll.vco);
+
+ /*
+ * The clocks to the flash devices and the L4_MAIN clocks can
+ * glitch when coming out of safe mode if their source values
+ * are different from their reset value. So the trick it to
+ * put them back to their reset state, and change input
+ * after exiting safe mode but before ungating the clocks.
+ */
+ writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
+ &clock_manager_base->per_pll.src);
+ writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
+ &clock_manager_base->main_pll.l4src);
+
+ /* read back for the required 5 us delay. */
+ readl(&clock_manager_base->main_pll.vco);
+ readl(&clock_manager_base->per_pll.vco);
+ readl(&clock_manager_base->sdr_pll.vco);
+
+
+ /*
+ * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
+ * with numerator and denominator.
+ */
+ writel(cfg->main_vco_base, &clock_manager_base->main_pll.vco);
+ writel(cfg->peri_vco_base, &clock_manager_base->per_pll.vco);
+ writel(cfg->sdram_vco_base, &clock_manager_base->sdr_pll.vco);
+
+ /*
+ * Time starts here. Must wait 7 us from
+ * BGPWRDN_SET(0) to VCO_ENABLE_SET(1).
+ */
+ end = timer_get_us() + 7;
+
+ /* main mpu */
+ writel(cfg->mpuclk, &clock_manager_base->main_pll.mpuclk);
+
+ /* altera group mpuclk */
+ writel(cfg->altera_grp_mpuclk, &clock_manager_base->altera.mpuclk);
+
+ /* main main clock */
+ writel(cfg->mainclk, &clock_manager_base->main_pll.mainclk);
+
+ /* main for dbg */
+ writel(cfg->dbgatclk, &clock_manager_base->main_pll.dbgatclk);
+
+ /* main for cfgs2fuser0clk */
+ writel(cfg->cfg2fuser0clk,
+ &clock_manager_base->main_pll.cfgs2fuser0clk);
+
+ /* Peri emac0 50 MHz default to RMII */
+ writel(cfg->emac0clk, &clock_manager_base->per_pll.emac0clk);
+
+ /* Peri emac1 50 MHz default to RMII */
+ writel(cfg->emac1clk, &clock_manager_base->per_pll.emac1clk);
+
+ /* Peri QSPI */
+ writel(cfg->mainqspiclk, &clock_manager_base->main_pll.mainqspiclk);
+
+ writel(cfg->perqspiclk, &clock_manager_base->per_pll.perqspiclk);
+
+ /* Peri pernandsdmmcclk */
+ writel(cfg->mainnandsdmmcclk,
+ &clock_manager_base->main_pll.mainnandsdmmcclk);
+
+ writel(cfg->pernandsdmmcclk,
+ &clock_manager_base->per_pll.pernandsdmmcclk);
+
+ /* Peri perbaseclk */
+ writel(cfg->perbaseclk, &clock_manager_base->per_pll.perbaseclk);
+
+ /* Peri s2fuser1clk */
+ writel(cfg->s2fuser1clk, &clock_manager_base->per_pll.s2fuser1clk);
+
+ /* 7 us must have elapsed before we can enable the VCO */
+ while (timer_get_us() < end)
+ ;
+
+ /* Enable vco */
+ /* main pll vco */
+ writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
+ &clock_manager_base->main_pll.vco);
+
+ /* periferal pll */
+ writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
+ &clock_manager_base->per_pll.vco);
+
+ /* sdram pll vco */
+ writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
+ &clock_manager_base->sdr_pll.vco);
+
+ /* L3 MP and L3 SP */
+ writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv);
+
+ writel(cfg->dbgdiv, &clock_manager_base->main_pll.dbgdiv);
+
+ writel(cfg->tracediv, &clock_manager_base->main_pll.tracediv);
+
+ /* L4 MP, L4 SP, can0, and can1 */
+ writel(cfg->perdiv, &clock_manager_base->per_pll.div);
+
+ writel(cfg->gpiodiv, &clock_manager_base->per_pll.gpiodiv);
+
+ cm_wait_for_lock(LOCKED_MASK);
+
+ /* write the sdram clock counters before toggling outreset all */
+ writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
+ &clock_manager_base->sdr_pll.ddrdqsclk);
+
+ writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
+ &clock_manager_base->sdr_pll.ddr2xdqsclk);
+
+ writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
+ &clock_manager_base->sdr_pll.ddrdqclk);
+
+ writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
+ &clock_manager_base->sdr_pll.s2fuser2clk);
+
+ /*
+ * after locking, but before taking out of bypass
+ * assert/deassert outresetall
+ */
+ u32 mainvco = readl(&clock_manager_base->main_pll.vco);
+
+ /* assert main outresetall */
+ writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
+ &clock_manager_base->main_pll.vco);
+
+ u32 periphvco = readl(&clock_manager_base->per_pll.vco);
+
+ /* assert pheriph outresetall */
+ writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
+ &clock_manager_base->per_pll.vco);
+
+ /* assert sdram outresetall */
+ writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN|
+ CLKMGR_SDRPLLGRP_VCO_OUTRESETALL,
+ &clock_manager_base->sdr_pll.vco);
+
+ /* deassert main outresetall */
+ writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
+ &clock_manager_base->main_pll.vco);
+
+ /* deassert pheriph outresetall */
+ writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
+ &clock_manager_base->per_pll.vco);
+
+ /* deassert sdram outresetall */
+ writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
+ &clock_manager_base->sdr_pll.vco);
+
+ /*
+ * now that we've toggled outreset all, all the clocks
+ * are aligned nicely; so we can change any phase.
+ */
+ cm_write_with_phase(cfg->ddrdqsclk,
+ (u32)&clock_manager_base->sdr_pll.ddrdqsclk,
+ CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
+
+ /* SDRAM DDR2XDQSCLK */
+ cm_write_with_phase(cfg->ddr2xdqsclk,
+ (u32)&clock_manager_base->sdr_pll.ddr2xdqsclk,
+ CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
+
+ cm_write_with_phase(cfg->ddrdqclk,
+ (u32)&clock_manager_base->sdr_pll.ddrdqclk,
+ CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
+
+ cm_write_with_phase(cfg->s2fuser2clk,
+ (u32)&clock_manager_base->sdr_pll.s2fuser2clk,
+ CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
+
+ /* Take all three PLLs out of bypass when safe mode is cleared. */
+ cm_write_bypass(0);
+
+ /* clear safe mode */
+ cm_write_ctrl(readl(&clock_manager_base->ctrl) | CLKMGR_CTRL_SAFEMODE);
+
+ /*
+ * now that safe mode is clear with clocks gated
+ * it safe to change the source mux for the flashes the the L4_MAIN
+ */
+ writel(cfg->persrc, &clock_manager_base->per_pll.src);
+ writel(cfg->l4src, &clock_manager_base->main_pll.l4src);
+
+ /* Now ungate non-hw-managed clocks */
+ writel(~0, &clock_manager_base->main_pll.en);
+ writel(~0, &clock_manager_base->per_pll.en);
+ writel(~0, &clock_manager_base->sdr_pll.en);
+
+ /* Clear the loss of lock bits (write 1 to clear) */
+ writel(CLKMGR_INTER_SDRPLLLOST_MASK | CLKMGR_INTER_PERPLLLOST_MASK |
+ CLKMGR_INTER_MAINPLLLOST_MASK,
+ &clock_manager_base->inter);
+}
+
+static unsigned int cm_get_main_vco_clk_hz(void)
+{
+ u32 reg, clock;
+
+ /* get the main VCO clock */
+ reg = readl(&clock_manager_base->main_pll.vco);
+ clock = cm_get_osc_clk_hz(1);
+ clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
+ CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
+ clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
+ CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
+
+ return clock;
+}
+
+static unsigned int cm_get_per_vco_clk_hz(void)
+{
+ u32 reg, clock = 0;
+
+ /* identify PER PLL clock source */
+ reg = readl(&clock_manager_base->per_pll.vco);
+ reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
+ CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
+ if (reg == CLKMGR_VCO_SSRC_EOSC1)
+ clock = cm_get_osc_clk_hz(1);
+ else if (reg == CLKMGR_VCO_SSRC_EOSC2)
+ clock = cm_get_osc_clk_hz(2);
+ else if (reg == CLKMGR_VCO_SSRC_F2S)
+ clock = cm_get_f2s_per_ref_clk_hz();
+
+ /* get the PER VCO clock */
+ reg = readl(&clock_manager_base->per_pll.vco);
+ clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
+ CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
+ clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
+ CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
+
+ return clock;
+}
+
+unsigned long cm_get_mpu_clk_hz(void)
+{
+ u32 reg, clock;
+
+ clock = cm_get_main_vco_clk_hz();
+
+ /* get the MPU clock */
+ reg = readl(&clock_manager_base->altera.mpuclk);
+ clock /= (reg + 1);
+ reg = readl(&clock_manager_base->main_pll.mpuclk);
+ clock /= (reg + 1);
+ return clock;
+}
+
+unsigned long cm_get_sdram_clk_hz(void)
+{
+ u32 reg, clock = 0;
+
+ /* identify SDRAM PLL clock source */
+ reg = readl(&clock_manager_base->sdr_pll.vco);
+ reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >>
+ CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET;
+ if (reg == CLKMGR_VCO_SSRC_EOSC1)
+ clock = cm_get_osc_clk_hz(1);
+ else if (reg == CLKMGR_VCO_SSRC_EOSC2)
+ clock = cm_get_osc_clk_hz(2);
+ else if (reg == CLKMGR_VCO_SSRC_F2S)
+ clock = cm_get_f2s_sdr_ref_clk_hz();
+
+ /* get the SDRAM VCO clock */
+ reg = readl(&clock_manager_base->sdr_pll.vco);
+ clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >>
+ CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1;
+ clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >>
+ CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1;
+
+ /* get the SDRAM (DDR_DQS) clock */
+ reg = readl(&clock_manager_base->sdr_pll.ddrdqsclk);
+ reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >>
+ CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET;
+ clock /= (reg + 1);
+
+ return clock;
+}
+
+unsigned int cm_get_l4_sp_clk_hz(void)
+{
+ u32 reg, clock = 0;
+
+ /* identify the source of L4 SP clock */
+ reg = readl(&clock_manager_base->main_pll.l4src);
+ reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>
+ CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET;
+
+ if (reg == CLKMGR_L4_SP_CLK_SRC_MAINPLL) {
+ clock = cm_get_main_vco_clk_hz();
+
+ /* get the clock prior L4 SP divider (main clk) */
+ reg = readl(&clock_manager_base->altera.mainclk);
+ clock /= (reg + 1);
+ reg = readl(&clock_manager_base->main_pll.mainclk);
+ clock /= (reg + 1);
+ } else if (reg == CLKMGR_L4_SP_CLK_SRC_PERPLL) {
+ clock = cm_get_per_vco_clk_hz();
+
+ /* get the clock prior L4 SP divider (periph_base_clk) */
+ reg = readl(&clock_manager_base->per_pll.perbaseclk);
+ clock /= (reg + 1);
+ }
+
+ /* get the L4 SP clock which supplied to UART */
+ reg = readl(&clock_manager_base->main_pll.maindiv);
+ reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
+ CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
+ clock = clock / (1 << reg);
+
+ return clock;
+}
+
+unsigned int cm_get_mmc_controller_clk_hz(void)
+{
+ u32 reg, clock = 0;
+
+ /* identify the source of MMC clock */
+ reg = readl(&clock_manager_base->per_pll.src);
+ reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
+ CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
+
+ if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
+ clock = cm_get_f2s_per_ref_clk_hz();
+ } else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
+ clock = cm_get_main_vco_clk_hz();
+
+ /* get the SDMMC clock */
+ reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
+ clock /= (reg + 1);
+ } else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
+ clock = cm_get_per_vco_clk_hz();
+
+ /* get the SDMMC clock */
+ reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk);
+ clock /= (reg + 1);
+ }
+
+ /* further divide by 4 as we have fixed divider at wrapper */
+ clock /= 4;
+ return clock;
+}
+
+unsigned int cm_get_qspi_controller_clk_hz(void)
+{
+ u32 reg, clock = 0;
+
+ /* identify the source of QSPI clock */
+ reg = readl(&clock_manager_base->per_pll.src);
+ reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
+ CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
+
+ if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
+ clock = cm_get_f2s_per_ref_clk_hz();
+ } else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
+ clock = cm_get_main_vco_clk_hz();
+
+ /* get the qspi clock */
+ reg = readl(&clock_manager_base->main_pll.mainqspiclk);
+ clock /= (reg + 1);
+ } else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
+ clock = cm_get_per_vco_clk_hz();
+
+ /* get the qspi clock */
+ reg = readl(&clock_manager_base->per_pll.perqspiclk);
+ clock /= (reg + 1);
+ }
+
+ return clock;
+}
+
+unsigned int cm_get_spi_controller_clk_hz(void)
+{
+ u32 reg, clock = 0;
+
+ clock = cm_get_per_vco_clk_hz();
+
+ /* get the clock prior L4 SP divider (periph_base_clk) */
+ reg = readl(&clock_manager_base->per_pll.perbaseclk);
+ clock /= (reg + 1);
+
+ return clock;
+}
diff --git a/arch/arm/mach-socfpga/include/mach/clock_manager.h
b/arch/arm/mach-socfpga/include/mach/clock_manager.h
index 803c926..123f6e2 100644
--- a/arch/arm/mach-socfpga/include/mach/clock_manager.h
+++ b/arch/arm/mach-socfpga/include/mach/clock_manager.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -8,310 +8,11 @@
#define _CLOCK_MANAGER_H_
#ifndef __ASSEMBLER__
-/* Clock speed accessors */
-unsigned long cm_get_mpu_clk_hz(void);
-unsigned long cm_get_sdram_clk_hz(void);
-unsigned int cm_get_l4_sp_clk_hz(void);
-unsigned int cm_get_mmc_controller_clk_hz(void);
-unsigned int cm_get_qspi_controller_clk_hz(void);
-unsigned int cm_get_spi_controller_clk_hz(void);
-const unsigned int cm_get_osc_clk_hz(const int osc);
-const unsigned int cm_get_f2s_per_ref_clk_hz(void);
-const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
-
-/* Clock configuration accessors */
-const struct cm_config * const cm_get_default_config(void);
+void cm_wait_for_lock(u32 mask);
+void cm_wait_for_fsm(void);
#endif
-struct cm_config {
- /* main group */
- uint32_t main_vco_base;
- uint32_t mpuclk;
- uint32_t mainclk;
- uint32_t dbgatclk;
- uint32_t mainqspiclk;
- uint32_t mainnandsdmmcclk;
- uint32_t cfg2fuser0clk;
- uint32_t maindiv;
- uint32_t dbgdiv;
- uint32_t tracediv;
- uint32_t l4src;
-
- /* peripheral group */
- uint32_t peri_vco_base;
- uint32_t emac0clk;
- uint32_t emac1clk;
- uint32_t perqspiclk;
- uint32_t pernandsdmmcclk;
- uint32_t perbaseclk;
- uint32_t s2fuser1clk;
- uint32_t perdiv;
- uint32_t gpiodiv;
- uint32_t persrc;
-
- /* sdram pll group */
- uint32_t sdram_vco_base;
- uint32_t ddrdqsclk;
- uint32_t ddr2xdqsclk;
- uint32_t ddrdqclk;
- uint32_t s2fuser2clk;
-
- /* altera group */
- uint32_t altera_grp_mpuclk;
-};
-
-void cm_basic_init(const struct cm_config * const cfg);
-
-struct socfpga_clock_manager_main_pll {
- u32 vco;
- u32 misc;
- u32 mpuclk;
- u32 mainclk;
- u32 dbgatclk;
- u32 mainqspiclk;
- u32 mainnandsdmmcclk;
- u32 cfgs2fuser0clk;
- u32 en;
- u32 maindiv;
- u32 dbgdiv;
- u32 tracediv;
- u32 l4src;
- u32 stat;
- u32 _pad_0x38_0x40[2];
-};
-
-struct socfpga_clock_manager_per_pll {
- u32 vco;
- u32 misc;
- u32 emac0clk;
- u32 emac1clk;
- u32 perqspiclk;
- u32 pernandsdmmcclk;
- u32 perbaseclk;
- u32 s2fuser1clk;
- u32 en;
- u32 div;
- u32 gpiodiv;
- u32 src;
- u32 stat;
- u32 _pad_0x34_0x40[3];
-};
-
-struct socfpga_clock_manager_sdr_pll {
- u32 vco;
- u32 ctrl;
- u32 ddrdqsclk;
- u32 ddr2xdqsclk;
- u32 ddrdqclk;
- u32 s2fuser2clk;
- u32 en;
- u32 stat;
-};
-
-struct socfpga_clock_manager_altera {
- u32 mpuclk;
- u32 mainclk;
-};
-
-struct socfpga_clock_manager {
- u32 ctrl;
- u32 bypass;
- u32 inter;
- u32 intren;
- u32 dbctrl;
- u32 stat;
- u32 _pad_0x18_0x3f[10];
- struct socfpga_clock_manager_main_pll main_pll;
- struct socfpga_clock_manager_per_pll per_pll;
- struct socfpga_clock_manager_sdr_pll sdr_pll;
- struct socfpga_clock_manager_altera altera;
- u32 _pad_0xe8_0x200[70];
-};
-
-#define CLKMGR_CTRL_SAFEMODE (1 << 0)
-#define CLKMGR_CTRL_SAFEMODE_OFFSET 0
-
-#define CLKMGR_BYPASS_PERPLLSRC (1 << 4)
-#define CLKMGR_BYPASS_PERPLLSRC_OFFSET 4
-#define CLKMGR_BYPASS_PERPLL (1 << 3)
-#define CLKMGR_BYPASS_PERPLL_OFFSET 3
-#define CLKMGR_BYPASS_SDRPLLSRC (1 << 2)
-#define CLKMGR_BYPASS_SDRPLLSRC_OFFSET 2
-#define CLKMGR_BYPASS_SDRPLL (1 << 1)
-#define CLKMGR_BYPASS_SDRPLL_OFFSET 1
-#define CLKMGR_BYPASS_MAINPLL (1 << 0)
-#define CLKMGR_BYPASS_MAINPLL_OFFSET 0
-
-#define CLKMGR_INTER_SDRPLLLOCKED_MASK 0x00000100
-#define CLKMGR_INTER_PERPLLLOCKED_MASK 0x00000080
-#define CLKMGR_INTER_MAINPLLLOCKED_MASK 0x00000040
-#define CLKMGR_INTER_PERPLLLOST_MASK 0x00000010
-#define CLKMGR_INTER_SDRPLLLOST_MASK 0x00000020
-#define CLKMGR_INTER_MAINPLLLOST_MASK 0x00000008
-
-#define CLKMGR_STAT_BUSY (1 << 0)
-
-/* Main PLL */
-#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN (1 << 0)
-#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN_OFFSET 0
-#define CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET 16
-#define CLKMGR_MAINPLLGRP_VCO_DENOM_MASK 0x003f0000
-#define CLKMGR_MAINPLLGRP_VCO_EN (1 << 1)
-#define CLKMGR_MAINPLLGRP_VCO_EN_OFFSET 1
-#define CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET 3
-#define CLKMGR_MAINPLLGRP_VCO_NUMER_MASK 0x0000fff8
-#define CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
-#define CLKMGR_MAINPLLGRP_VCO_PWRDN (1 << 2)
-#define CLKMGR_MAINPLLGRP_VCO_PWRDN_OFFSET 2
-#define CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
-#define CLKMGR_MAINPLLGRP_VCO_RESET_VALUE 0x8001000d
-
-#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_OFFSET 0
-#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_OFFSET 0
-#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_OFFSET 0
-#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_OFFSET 0
-#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_OFFSET 0
-#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_OFFSET 0
-#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK 0x00000010
-#define CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK 0x00000020
-#define CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK 0x00000080
-#define CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK 0x00000040
-#define CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK 0x00000004
-#define CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK 0x00000200
-
-#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_OFFSET 0
-#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_MASK 0x00000003
-#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_OFFSET 2
-#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_MASK 0x0000000c
-#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_OFFSET 4
-#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_MASK 0x00000070
-#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET 7
-#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK 0x00000380
-
-#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_OFFSET 0
-#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_MASK 0x00000003
-#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_OFFSET 2
-#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_MASK 0x0000000c
-
-#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_OFFSET 0
-#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_MASK 0x00000007
-
-#define CLKMGR_MAINPLLGRP_L4SRC_L4MP (1 << 0)
-#define CLKMGR_MAINPLLGRP_L4SRC_L4MP_OFFSET 0
-#define CLKMGR_MAINPLLGRP_L4SRC_L4SP (1 << 1)
-#define CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET 1
-#define CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE 0x00000000
-#define CLKMGR_L4_SP_CLK_SRC_MAINPLL 0x0
-#define CLKMGR_L4_SP_CLK_SRC_PERPLL 0x1
-
-/* Per PLL */
-#define CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET 16
-#define CLKMGR_PERPLLGRP_VCO_DENOM_MASK 0x003f0000
-#define CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET 3
-#define CLKMGR_PERPLLGRP_VCO_NUMER_MASK 0x0000fff8
-#define CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
-#define CLKMGR_PERPLLGRP_VCO_PSRC_OFFSET 22
-#define CLKMGR_PERPLLGRP_VCO_PSRC_MASK 0x00c00000
-#define CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
-#define CLKMGR_PERPLLGRP_VCO_RESET_VALUE 0x8001000d
-#define CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET 22
-#define CLKMGR_PERPLLGRP_VCO_SSRC_MASK 0x00c00000
-
-#define CLKMGR_VCO_SSRC_EOSC1 0x0
-#define CLKMGR_VCO_SSRC_EOSC2 0x1
-#define CLKMGR_VCO_SSRC_F2S 0x2
-
-#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_OFFSET 0
-#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_OFFSET 0
-#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_OFFSET 0
-#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_OFFSET 0
-#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_OFFSET 0
-#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_OFFSET 0
-#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_MASK 0x000001ff
-
-#define CLKMGR_PERPLLGRP_EN_NANDCLK_MASK 0x00000400
-#define CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK 0x00000100
-
-#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_OFFSET 6
-#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_MASK 0x000001c0
-#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_OFFSET 9
-#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_MASK 0x00000e00
-#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
-#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
-#define CLKMGR_PERPLLGRP_DIV_USBCLK_OFFSET 0
-#define CLKMGR_PERPLLGRP_DIV_USBCLK_MASK 0x00000007
-
-#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_OFFSET 0
-#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_MASK 0x00ffffff
-
-#define CLKMGR_PERPLLGRP_SRC_NAND_OFFSET 2
-#define CLKMGR_PERPLLGRP_SRC_NAND_MASK 0x0000000c
-#define CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET 4
-#define CLKMGR_PERPLLGRP_SRC_QSPI_MASK 0x00000030
-#define CLKMGR_PERPLLGRP_SRC_RESET_VALUE 0x00000015
-#define CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET 0
-#define CLKMGR_PERPLLGRP_SRC_SDMMC_MASK 0x00000003
-#define CLKMGR_SDMMC_CLK_SRC_F2S 0x0
-#define CLKMGR_SDMMC_CLK_SRC_MAIN 0x1
-#define CLKMGR_SDMMC_CLK_SRC_PER 0x2
-#define CLKMGR_QSPI_CLK_SRC_F2S 0x0
-#define CLKMGR_QSPI_CLK_SRC_MAIN 0x1
-#define CLKMGR_QSPI_CLK_SRC_PER 0x2
-
-/* SDR PLL */
-#define CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET 16
-#define CLKMGR_SDRPLLGRP_VCO_DENOM_MASK 0x003f0000
-#define CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET 3
-#define CLKMGR_SDRPLLGRP_VCO_NUMER_MASK 0x0000fff8
-#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL (1 << 24)
-#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_OFFSET 24
-#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_OFFSET 25
-#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_MASK 0x7e000000
-#define CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
-#define CLKMGR_SDRPLLGRP_VCO_RESET_VALUE 0x8001000d
-#define CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET 22
-#define CLKMGR_SDRPLLGRP_VCO_SSRC_MASK 0x00c00000
-
-#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET 0
-#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK 0x000001ff
-#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_OFFSET 9
-#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK 0x00000e00
-
-#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_OFFSET 0
-#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK 0x000001ff
-#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_OFFSET 9
-#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK 0x00000e00
-
-#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_OFFSET 0
-#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK 0x000001ff
-#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_OFFSET 9
-#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK 0x00000e00
-
-#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_OFFSET 0
-#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK 0x000001ff
-#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_OFFSET 9
-#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK 0x00000e00
-
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
+#include <asm/arch/clock_manager_gen5.h>
+#endif
#endif /* _CLOCK_MANAGER_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/clock_manager_gen5.h
b/arch/arm/mach-socfpga/include/mach/clock_manager_gen5.h
new file mode 100644
index 0000000..8d62d8e
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/clock_manager_gen5.h
@@ -0,0 +1,322 @@
+/*
+ * Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CLOCK_MANAGER_GEN5_H_
+#define _CLOCK_MANAGER_GEN5_H_
+
+#ifndef __ASSEMBLER__
+
+struct cm_config {
+ /* main group */
+ u32 main_vco_base;
+ u32 mpuclk;
+ u32 mainclk;
+ u32 dbgatclk;
+ u32 mainqspiclk;
+ u32 mainnandsdmmcclk;
+ u32 cfg2fuser0clk;
+ u32 maindiv;
+ u32 dbgdiv;
+ u32 tracediv;
+ u32 l4src;
+
+ /* peripheral group */
+ u32 peri_vco_base;
+ u32 emac0clk;
+ u32 emac1clk;
+ u32 perqspiclk;
+ u32 pernandsdmmcclk;
+ u32 perbaseclk;
+ u32 s2fuser1clk;
+ u32 perdiv;
+ u32 gpiodiv;
+ u32 persrc;
+
+ /* sdram pll group */
+ u32 sdram_vco_base;
+ u32 ddrdqsclk;
+ u32 ddr2xdqsclk;
+ u32 ddrdqclk;
+ u32 s2fuser2clk;
+
+ /* altera group */
+ u32 altera_grp_mpuclk;
+};
+
+struct socfpga_clock_manager_main_pll {
+ u32 vco;
+ u32 misc;
+ u32 mpuclk;
+ u32 mainclk;
+ u32 dbgatclk;
+ u32 mainqspiclk;
+ u32 mainnandsdmmcclk;
+ u32 cfgs2fuser0clk;
+ u32 en;
+ u32 maindiv;
+ u32 dbgdiv;
+ u32 tracediv;
+ u32 l4src;
+ u32 stat;
+ u32 _pad_0x38_0x40[2];
+};
+
+struct socfpga_clock_manager_per_pll {
+ u32 vco;
+ u32 misc;
+ u32 emac0clk;
+ u32 emac1clk;
+ u32 perqspiclk;
+ u32 pernandsdmmcclk;
+ u32 perbaseclk;
+ u32 s2fuser1clk;
+ u32 en;
+ u32 div;
+ u32 gpiodiv;
+ u32 src;
+ u32 stat;
+ u32 _pad_0x34_0x40[3];
+};
+
+struct socfpga_clock_manager_sdr_pll {
+ u32 vco;
+ u32 ctrl;
+ u32 ddrdqsclk;
+ u32 ddr2xdqsclk;
+ u32 ddrdqclk;
+ u32 s2fuser2clk;
+ u32 en;
+ u32 stat;
+};
+
+struct socfpga_clock_manager_altera {
+ u32 mpuclk;
+ u32 mainclk;
+};
+
+struct socfpga_clock_manager {
+ u32 ctrl;
+ u32 bypass;
+ u32 inter;
+ u32 intren;
+ u32 dbctrl;
+ u32 stat;
+ u32 _pad_0x18_0x3f[10];
+ struct socfpga_clock_manager_main_pll main_pll;
+ struct socfpga_clock_manager_per_pll per_pll;
+ struct socfpga_clock_manager_sdr_pll sdr_pll;
+ struct socfpga_clock_manager_altera altera;
+ u32 _pad_0xe8_0x200[70];
+};
+
+/* Clock speed accessors */
+unsigned long cm_get_mpu_clk_hz(void);
+unsigned long cm_get_sdram_clk_hz(void);
+unsigned int cm_get_l4_sp_clk_hz(void);
+unsigned int cm_get_mmc_controller_clk_hz(void);
+unsigned int cm_get_qspi_controller_clk_hz(void);
+unsigned int cm_get_spi_controller_clk_hz(void);
+const unsigned int cm_get_osc_clk_hz(const int osc);
+const unsigned int cm_get_f2s_per_ref_clk_hz(void);
+const unsigned int cm_get_f2s_sdr_ref_clk_hz(void);
+
+/* Clock configuration accessors */
+void cm_basic_init(const struct cm_config * const cfg);
+const struct cm_config * const cm_get_default_config(void);
+#endif /* __ASSEMBLER__ */
+
+#define LOCKED_MASK \
+ (CLKMGR_INTER_SDRPLLLOCKED_MASK | \
+ CLKMGR_INTER_PERPLLLOCKED_MASK | \
+ CLKMGR_INTER_MAINPLLLOCKED_MASK)
+
+#define CLKMGR_CTRL_SAFEMODE BIT(0)
+#define CLKMGR_CTRL_SAFEMODE_OFFSET 0
+
+#define CLKMGR_BYPASS_PERPLLSRC BIT(4)
+#define CLKMGR_BYPASS_PERPLLSRC_OFFSET 4
+#define CLKMGR_BYPASS_PERPLL BIT(3)
+#define CLKMGR_BYPASS_PERPLL_OFFSET 3
+#define CLKMGR_BYPASS_SDRPLLSRC BIT(2)
+#define CLKMGR_BYPASS_SDRPLLSRC_OFFSET 2
+#define CLKMGR_BYPASS_SDRPLL BIT(1)
+#define CLKMGR_BYPASS_SDRPLL_OFFSET 1
+#define CLKMGR_BYPASS_MAINPLL BIT(0)
+#define CLKMGR_BYPASS_MAINPLL_OFFSET 0
+
+#define CLKMGR_INTER_SDRPLLLOCKED_MASK 0x00000100
+#define CLKMGR_INTER_PERPLLLOCKED_MASK 0x00000080
+#define CLKMGR_INTER_MAINPLLLOCKED_MASK 0x00000040
+#define CLKMGR_INTER_PERPLLLOST_MASK 0x00000010
+#define CLKMGR_INTER_SDRPLLLOST_MASK 0x00000020
+#define CLKMGR_INTER_MAINPLLLOST_MASK 0x00000008
+
+#define CLKMGR_STAT_BUSY BIT(0)
+
+/* Main PLL */
+#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN BIT(0)
+#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN_OFFSET 0
+#define CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET 16
+#define CLKMGR_MAINPLLGRP_VCO_DENOM_MASK 0x003f0000
+#define CLKMGR_MAINPLLGRP_VCO_EN BIT(1)
+#define CLKMGR_MAINPLLGRP_VCO_EN_OFFSET 1
+#define CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET 3
+#define CLKMGR_MAINPLLGRP_VCO_NUMER_MASK 0x0000fff8
+#define CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
+#define CLKMGR_MAINPLLGRP_VCO_PWRDN BIT(2)
+#define CLKMGR_MAINPLLGRP_VCO_PWRDN_OFFSET 2
+#define CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
+#define CLKMGR_MAINPLLGRP_VCO_RESET_VALUE 0x8001000d
+
+#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_OFFSET 0
+#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_OFFSET 0
+#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_OFFSET 0
+#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_OFFSET 0
+#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_OFFSET 0
+#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_OFFSET 0
+#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK 0x00000010
+#define CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK 0x00000020
+#define CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK 0x00000080
+#define CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK 0x00000040
+#define CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK 0x00000004
+#define CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK 0x00000200
+
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_OFFSET 0
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_MASK 0x00000003
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_OFFSET 2
+#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_MASK 0x0000000c
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_OFFSET 4
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_MASK 0x00000070
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET 7
+#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK 0x00000380
+
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_OFFSET 0
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_MASK 0x00000003
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_OFFSET 2
+#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_MASK 0x0000000c
+
+#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_OFFSET 0
+#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_MASK 0x00000007
+
+#define CLKMGR_MAINPLLGRP_L4SRC_L4MP BIT(0)
+#define CLKMGR_MAINPLLGRP_L4SRC_L4MP_OFFSET 0
+#define CLKMGR_MAINPLLGRP_L4SRC_L4SP BIT(1)
+#define CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET 1
+#define CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE 0x00000000
+#define CLKMGR_L4_SP_CLK_SRC_MAINPLL 0x0
+#define CLKMGR_L4_SP_CLK_SRC_PERPLL 0x1
+
+/* Per PLL */
+#define CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET 16
+#define CLKMGR_PERPLLGRP_VCO_DENOM_MASK 0x003f0000
+#define CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET 3
+#define CLKMGR_PERPLLGRP_VCO_NUMER_MASK 0x0000fff8
+#define CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
+#define CLKMGR_PERPLLGRP_VCO_PSRC_OFFSET 22
+#define CLKMGR_PERPLLGRP_VCO_PSRC_MASK 0x00c00000
+#define CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
+#define CLKMGR_PERPLLGRP_VCO_RESET_VALUE 0x8001000d
+#define CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET 22
+#define CLKMGR_PERPLLGRP_VCO_SSRC_MASK 0x00c00000
+
+#define CLKMGR_VCO_SSRC_EOSC1 0x0
+#define CLKMGR_VCO_SSRC_EOSC2 0x1
+#define CLKMGR_VCO_SSRC_F2S 0x2
+
+#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_OFFSET 0
+#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_OFFSET 0
+#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_OFFSET 0
+#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_OFFSET 0
+#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_OFFSET 0
+#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_OFFSET 0
+#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_MASK 0x000001ff
+
+#define CLKMGR_PERPLLGRP_EN_NANDCLK_MASK 0x00000400
+#define CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK 0x00000100
+
+#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_OFFSET 6
+#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_MASK 0x000001c0
+#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_OFFSET 9
+#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_MASK 0x00000e00
+#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
+#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
+#define CLKMGR_PERPLLGRP_DIV_USBCLK_OFFSET 0
+#define CLKMGR_PERPLLGRP_DIV_USBCLK_MASK 0x00000007
+
+#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_OFFSET 0
+#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_MASK 0x00ffffff
+
+#define CLKMGR_PERPLLGRP_SRC_NAND_OFFSET 2
+#define CLKMGR_PERPLLGRP_SRC_NAND_MASK 0x0000000c
+#define CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET 4
+#define CLKMGR_PERPLLGRP_SRC_QSPI_MASK 0x00000030
+#define CLKMGR_PERPLLGRP_SRC_RESET_VALUE 0x00000015
+#define CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET 0
+#define CLKMGR_PERPLLGRP_SRC_SDMMC_MASK 0x00000003
+#define CLKMGR_SDMMC_CLK_SRC_F2S 0x0
+#define CLKMGR_SDMMC_CLK_SRC_MAIN 0x1
+#define CLKMGR_SDMMC_CLK_SRC_PER 0x2
+#define CLKMGR_QSPI_CLK_SRC_F2S 0x0
+#define CLKMGR_QSPI_CLK_SRC_MAIN 0x1
+#define CLKMGR_QSPI_CLK_SRC_PER 0x2
+
+/* SDR PLL */
+#define CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET 16
+#define CLKMGR_SDRPLLGRP_VCO_DENOM_MASK 0x003f0000
+#define CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET 3
+#define CLKMGR_SDRPLLGRP_VCO_NUMER_MASK 0x0000fff8
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL BIT(24)
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_OFFSET 24
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_OFFSET 25
+#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_MASK 0x7e000000
+#define CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
+#define CLKMGR_SDRPLLGRP_VCO_RESET_VALUE 0x8001000d
+#define CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET 22
+#define CLKMGR_SDRPLLGRP_VCO_SSRC_MASK 0x00c00000
+
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET 0
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK 0x000001ff
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_OFFSET 9
+#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK 0x00000e00
+
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_OFFSET 0
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK 0x000001ff
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_OFFSET 9
+#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK 0x00000e00
+
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_OFFSET 0
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK 0x000001ff
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_OFFSET 9
+#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK 0x00000e00
+
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_OFFSET 0
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK 0x000001ff
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_OFFSET 9
+#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK 0x00000e00
+
+#endif /* _CLOCK_MANAGER_GEN5_H_ */
--
1.8.2.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
