Dear "David Collier", In message <memo.20091026103604.20...@postmaster+dexdyne.com.cix.co.uk> you wrote: > My apologies, I've posted this is AVR32_u-boot where it probably belongs. > > But I'm running out of time to ship some prototypes tomorrow, and this is > my last major issue with them, so could I throw myself on the mercy of > the assembled wisdom please? Maybe someone will say - you stupid person, > you need to change this line to that....
I don;t say that, but I do say this: With such a short deadline, you should have hired an expert a couple of days (or weeks) ago. > Yes, I know the very latest u-boot sources can do similar, but I had to > freeze on 2008-10 because of the saveenv issue. Too late to update now. This is unlogical. Instead of updating and fixing "the saveenv issue" (whatever this is) you are using old code - where you now have to fix "the PHY issue". Is this any better? ... > the linux startup says: > > eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:10, irq=-1) > eth1: attached PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1) > > now we have strapped PHYAD4 high, so the 2 phys should have addresses > binary 10000 and 10001 > > I can't see any relationship between 0:10 and 1:00 and 10000 and 10001 > !!! ... > well maybe - the first one looks right - binary 10000 is hex 10 > but the other port should be on hex 11, not hex 0!!!!!! Maybe your haredware is not what you think it is? > but under u-boot > > in my file derived from ATNGW10.c I have > > void board_init_info(void) > { > gd->bd->bi_phy_id[0] = 0x01; > gd->bd->bi_phy_id[1] = 0x03; > } I can't see any relationship between 0x01 and 0x03 and 10000 and 10001 (or 0:10 and 1:00 either). Maybe you try these instead? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Even if you can deceive people about a product through misleading statements, sooner or later the product will speak for itself. - Hajime Karatsu _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot