On 12 April 2017 at 02:11, Wenyou Yang <wenyou.y...@atmel.com> wrote: > The device tree source files of at91sam9n12ek boards are copied from > the Linux v4.10, do the changes as below. > - Add the reg property for the pinctrl node. > - Move the gpio (pioA, pioB, pioC, pioD) nodes as the pinctrl's > slibling nodes, instead of the child nodes. > - Change the compatible of the spi flash to "spi-flash". > - Add the spi0 aliases. > - Fix the pinctrl-names of mmc0 node. > - Add the "u-boot,dm-pre-reloc" property to determine which nodes > are used by the board_init_f stage. > - Fix the compilation warnings. > > Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com> > --- > > arch/arm/dts/Makefile | 2 + > arch/arm/dts/at91sam9n12.dtsi | 1064 > ++++++++++++++++++++++++++++++++++++++++ > arch/arm/dts/at91sam9n12ek.dts | 265 ++++++++++ > 3 files changed, 1331 insertions(+) > create mode 100644 arch/arm/dts/at91sam9n12.dtsi > create mode 100644 arch/arm/dts/at91sam9n12ek.dts
Reviewed-by: Simon Glass <s...@chromium.org> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot