On 12 April 2017 at 02:12, Wenyou Yang <wenyou.y...@atmel.com> wrote: > The device tree source files of at91sam9g20ek and at91sam9260ek > boards are copied from the Linux v4.10, do the changes below. > - Fix the build error for the usb0 node. > - Add the reg property for the pinctrl node. > - Move the gpio (pioA, pioB, pioC ...) nodes as the pinctrl's > slibling nodes, instead of the child nodes. > - Add the "u-boot,dm-pre-reloc" property for the dbgu node are used > in board_init_f stage. > - Add the clk pinctrl of the mmc0 node. > - Fix the compilation warnings. > > Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com> > --- > > arch/arm/dts/Makefile | 5 + > arch/arm/dts/at91sam9260.dtsi | 149 ++++++++++++---------- > arch/arm/dts/at91sam9260ek.dts | 215 +++++++++++++++++++++++++++++++ > arch/arm/dts/at91sam9g20.dtsi | 4 +- > arch/arm/dts/at91sam9g20ek.dts | 29 +++++ > arch/arm/dts/at91sam9g20ek_2mmc.dts | 56 ++++++++ > arch/arm/dts/at91sam9g20ek_common.dtsi | 227 > +++++++++++++++++++++++++++++++++ > 7 files changed, 617 insertions(+), 68 deletions(-) > create mode 100644 arch/arm/dts/at91sam9260ek.dts > create mode 100644 arch/arm/dts/at91sam9g20ek.dts > create mode 100644 arch/arm/dts/at91sam9g20ek_2mmc.dts > create mode 100644 arch/arm/dts/at91sam9g20ek_common.dtsi >
Reviewed-by: Simon Glass <s...@chromium.org> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot