On Mon, May 29, 2017 at 02:18:48PM +0200, Jorge Ramirez wrote:
> On 05/29/2017 01:57 PM, Tom Rini wrote:
> >>The issue is actually with serial-uclass.c when the kernel dts
> >>contains a chosen node that contains the stdout-path.
> >> chosen {
> >> stdout-path = "serial0:115200n8";
> >> };
> >>
> >>Disabling uart0 (ie serial0) in u-boot.dtsi loses the console
> >>instead of probing the pl01x for the platform_data.
> >>
> >>is there a pre-defined way to work around this?
> >Provide a new stdout-path in the -u-boot.dtsi too? Any changes you
>
> yes I obviously tried that but are you sure that that is allowed
> with "chosen" it being kind of a special type of node?
> the compiler just cant find the label when added to u-boot.dtsi
> hence why I was asking (sorry, I should have raised it upfront)
> ie:
>
> /*
> * U-Boot addition to:
> * 1) use platform data for the console
> * 2) provide support for the generic-ehci USB driver currently not
> available
> * in the linux kernel (8/May/2017).
> *
> * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-or...@linaro.org>
> *
> * SPDX-License-Identifier: GPL-2.0+
> */
>
> &soc {
> usb2: ehci@9890000 {
> compatible = "generic-ehci";
> reg = <0x9890000 0x100>;
> status = "okay";
> };
> };
>
> &uart0 {
> status = "disabled";
> };
>
> &chosen {
> stdout-path = &uart0;
>
> };
>
>
> leads to
>
> LD u-boot
> OBJCOPY u-boot.srec
> OBJCOPY u-boot-nodtb.bin
> SYM u-boot.sym
> start=$(aarch64-linux-gnu-nm u-boot | grep __rel_dyn_start | cut -f
> 1 -d ' '); end=$(aarch64-linux-gnu-nm u-boot | grep __rel_dyn_end |
> cut -f 1 -d ' '); tools/relocate-rela u-boot-nodtb.bin 0x37000000
> $start $end
> DTC arch/arm/dts/hi3798cv200-poplar.dtb
> Error: ./arch/arm/dts/hi3798cv200-u-boot.dtsi:27.2-3 label or path,
> 'chosen', not found
> FATAL ERROR: Syntax error parsing input tree
> scripts/Makefile.lib:322: recipe for target
> 'arch/arm/dts/hi3798cv200-poplar.dtb' failed
> make[2]: *** [arch/arm/dts/hi3798cv200-poplar.dtb] Error 1
> dts/Makefile:32: recipe for target
> 'arch/arm/dts/hi3798cv200-poplar.dtb' failed
> make[1]: *** [arch/arm/dts/hi3798cv200-poplar.dtb] Error 2
> Makefile:865: recipe for target 'dts/dt.dtb' failed
> make: *** [dts/dt.dtb] Error 2
> Well, lets see. Pantelis has been telling me that what we're doing here is going to lead to problems like what you see here in some cases. Any suggestions? -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
