On 13/11/09 13:05, Ajay Kumar Gupta wrote:
> Tested USB host functionality on DA830 EVM.
> 
> Signed-off-by: Ajay Kumar Gupta <ajay.gu...@ti.com>
> Signed-off-by: Swaminathan S <swami.i...@ti.com>
> ---
> Patch has updated licensing header.Other patch in series has no update
> so not reposting them untill I get any rework comment.
> 
>  drivers/usb/musb/Makefile |    1 +
>  drivers/usb/musb/da8xx.c  |  143 
> +++++++++++++++++++++++++++++++++++++++++++++
>  drivers/usb/musb/da8xx.h  |   84 ++++++++++++++++++++++++++
>  include/usb.h             |    3 +-
>  4 files changed, 230 insertions(+), 1 deletions(-)
>  create mode 100644 drivers/usb/musb/da8xx.c
>  create mode 100644 drivers/usb/musb/da8xx.h
> 

> diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
> new file mode 100644
> index 0000000..3e4694f
> --- /dev/null
> +++ b/drivers/usb/musb/da8xx.c

> +int musb_platform_init(void)
> +{
> +     u32  revision;
> +
> +     /* enable psc for usb2.0 */
> +     lpsc_on(33);
> +
> +     /* enable usb vbus */
> +     enable_vbus();
> +
> +     /* reset the controller */
> +     writel(0x1, (DA8XX_USB_OTG_BASE + DA8XX_USB_CTRL_REG));
> +     udelay(5000);
> +
> +     /* start the on-chip usb phy and its pll */
> +     if (phy_on() == 0)
> +             return -1;
> +
> +     /* Returns zero if e.g. not clocked */
> +     revision = readl(DA8XX_USB_OTG_BASE + DA8XX_USB_VERSION_REG);
> +     if (revision == 0)
> +             return -1;
> +
> +     /* Disable all interrupts */
> +     writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
> +             DA8XX_USB_RXINT_MASK),
> +             (DA8XX_USB_OTG_BASE + DA8XX_USB_INT_MASK_SET_REG));

This last line should have one less alignment space.

You still have a good collection of OTG + offset #defines here and below.
Could you please add a C struct and pointer instead.

> +     return 0;
> +}
> +
> +/*
> + * This function performs DA8xx platform specific deinitialization for usb0.
> + */
> +void musb_platform_deinit(void)
> +{
> +     /* Turn of the phy */
> +     phy_off();
> +
> +     /* flush any interrupts */
> +     writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
> +             DA8XX_USB_RXINT_MASK),
> +             (DA8XX_USB_OTG_BASE + DA8XX_USB_INT_MASK_CLR_REG));
> +     writel(0, (DA8XX_USB_OTG_BASE + DA8XX_USB_EOI_REG));
> +}
> diff --git a/drivers/usb/musb/da8xx.h b/drivers/usb/musb/da8xx.h
> new file mode 100644
> index 0000000..c3e9c77
> --- /dev/null
> +++ b/drivers/usb/musb/da8xx.h
> +#ifndef __DA8XX_MUSB_H__
> +#define __DA8XX_MUSB_H__
> +
> +#include "musb_core.h"
> +
> +/* extern functions */
> +extern void lpsc_on(unsigned int id);

Already defined in hardware.h (inherited here from davinci.h)

> +
> +/* Base address of da8xx usb0 wrapper */
> +#define DA8XX_USB_OTG_BASE  0x01E00000
> +
> +/* Base address of da8xx musb core */
> +#define DA8XX_USB_OTG_CORE_BASE (DA8XX_USB_OTG_BASE + 0x400)
> +
> +/* Timeout for DA8xx usb module */
> +#define DA8XX_USB_OTG_TIMEOUT 0x3FFFFFF
> +
> +/* For now include usb OTG module registers here */
> +#define DA8XX_USB_VERSION_REG                        0x00
> +#define DA8XX_USB_CTRL_REG                   0x04
> +#define DA8XX_USB_INT_MASK_SET_REG           0x30
> +#define DA8XX_USB_INT_MASK_CLR_REG           0x34
> +#define DA8XX_USB_EOI_REG                    0x3c

These should be removed in favour of struct members.

> +
> +#define DA8XX_USB_TX_ENDPTS_MASK  0x1f                 /* ep0 + 4 tx */
> +#define DA8XX_USB_RX_ENDPTS_MASK  0x1e                 /* 4 rx */
> +#define DA8XX_USB_TXINT_SHIFT          0
> +#define DA8XX_USB_RXINT_SHIFT          8
> +
> +#define DA8XX_USB_USBINT_MASK          0x01ff0000  /* 8 Mentor, DRVVBUS */
> +#define DA8XX_USB_TXINT_MASK \
> +             (DA8XX_USB_TX_ENDPTS_MASK << DA8XX_USB_TXINT_SHIFT)
> +#define DA8XX_USB_RXINT_MASK \
> +             (DA8XX_USB_RX_ENDPTS_MASK << DA8XX_USB_RXINT_SHIFT)
> +
> +/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
> +#define CFGCHIP2_PHYCLKGD    (1 << 17)
> +#define CFGCHIP2_VBUSSENSE   (1 << 16)
> +#define CFGCHIP2_RESET               (1 << 15)
> +#define CFGCHIP2_OTGMODE     (3 << 13)
> +#define CFGCHIP2_NO_OVERRIDE (0 << 13)
> +#define CFGCHIP2_FORCE_HOST  (1 << 13)
> +#define CFGCHIP2_FORCE_DEVICE        (2 << 13)
> +#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
> +#define CFGCHIP2_USB1PHYCLKMUX       (1 << 12)
> +#define CFGCHIP2_USB2PHYCLKMUX       (1 << 11)
> +#define CFGCHIP2_PHYPWRDN    (1 << 10)
> +#define CFGCHIP2_OTGPWRDN    (1 << 9)
> +#define CFGCHIP2_DATPOL      (1 << 8)
> +#define CFGCHIP2_USB1SUSPENDM        (1 << 7)
> +#define CFGCHIP2_PHY_PLLON   (1 << 6)        /* override PLL suspend */
> +#define CFGCHIP2_SESENDEN    (1 << 5)        /* Vsess_end comparator */
> +#define CFGCHIP2_VBDTCTEN    (1 << 4)        /* Vbus comparator */
> +#define CFGCHIP2_REFFREQ     (0xf << 0)
> +#define CFGCHIP2_REFFREQ_12MHZ       (1 << 0)
> +#define CFGCHIP2_REFFREQ_24MHZ       (2 << 0)
> +#define CFGCHIP2_REFFREQ_48MHZ       (3 << 0)
> +
> +#define DA8XX_USB_VBUS_GPIO  (1 << 15)
> +#endif       /* __DA8XX_MUSB_H__ */
> +
> diff --git a/include/usb.h b/include/usb.h
> index 7c47098..7c56ace 100644
> --- a/include/usb.h
> +++ b/include/usb.h
> @@ -183,7 +183,8 @@ struct usb_device {
>  #if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
>       defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \
>       defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \
> -     defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI)
> +     defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI) || \
> +     defined(CONFIG_USB_DA8XX)

These are aligned incorrectly (should be 4 spaces rather than a tab)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to