From: Dirk Eibach <dirk.eib...@gdsys.cc>
The gdsys gazerbeam board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 2x 10/100 Mbit/s Ethernet (optional)
Signed-off-by: Dirk Eibach <dirk.eib...@gdsys.cc>
Signed-off-by: Mario Six <mario....@gdsys.cc>
---
arch/powerpc/cpu/mpc83xx/Kconfig | 3 +
arch/powerpc/dts/.gitignore | 1 +
arch/powerpc/dts/Makefile | 15 +
board/gdsys/common/Makefile | 1 +
board/gdsys/common/ioep-fpga.c | 617 ++++++++++++++++++++++++++++++---------
board/gdsys/mpc8308/Kconfig | 19 ++
board/gdsys/mpc8308/MAINTAINERS | 2 +
board/gdsys/mpc8308/Makefile | 1 +
board/gdsys/mpc8308/gazerbeam.c | 332 +++++++++++++++++++++
configs/gazerbeam_defconfig | 76 +++++
include/configs/gazerbeam.h | 484 ++++++++++++++++++++++++++++++
include/fdt_fixup.h | 5 +
12 files changed, 1416 insertions(+), 140 deletions(-)
create mode 100644 arch/powerpc/dts/.gitignore
create mode 100644 arch/powerpc/dts/Makefile
create mode 100644 board/gdsys/mpc8308/gazerbeam.c
create mode 100644 configs/gazerbeam_defconfig
create mode 100644 include/configs/gazerbeam.h
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index cdd21a253a..0790b47aa4 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -91,6 +91,9 @@ config TARGET_STRIDER
bool "Support strider"
select SYS_FSL_ERRATUM_ESDHC111
+config TARGET_GAZERBEAM
+ bool "Support gazerbeam"
+
endchoice
source "board/esd/vme8349/Kconfig"
diff --git a/arch/powerpc/dts/.gitignore b/arch/powerpc/dts/.gitignore
new file mode 100644
index 0000000000..b60ed208c7
--- /dev/null
+++ b/arch/powerpc/dts/.gitignore
@@ -0,0 +1 @@
+*.dtb
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile
new file mode 100644
index 0000000000..7a0c61ffaa
--- /dev/null
+++ b/arch/powerpc/dts/Makefile
@@ -0,0 +1,15 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+dtb-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.dtb
+
+targets += $(dtb-y)
+
+DTC_FLAGS += -R 4 -p 0x1000
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+ @:
+
+clean-files := *.dtb
diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile
index 6f2fea207f..52561db2e1 100644
--- a/board/gdsys/common/Makefile
+++ b/board/gdsys/common/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_STRIDER) += mclink.o dp501.o phy.o ioep-fpga.o
adv7611.o ch7301.o
obj-$(CONFIG_STRIDER) += fanctrl.o
obj-$(CONFIG_STRIDER_CON) += osd.o
obj-$(CONFIG_STRIDER_CON_DP) += osd.o
+obj-$(CONFIG_TARGET_GAZERBEAM) += osd.o ihs_mdio.o ioep-fpga.o
diff --git a/board/gdsys/common/ioep-fpga.c b/board/gdsys/common/ioep-fpga.c
index a666b93445..24585672f6 100644
--- a/board/gdsys/common/ioep-fpga.c
+++ b/board/gdsys/common/ioep-fpga.c
@@ -11,231 +11,568 @@
#include <gdsys_fpga.h>
-enum {
- UNITTYPE_MAIN_SERVER = 0,
- UNITTYPE_MAIN_USER = 1,
- UNITTYPE_VIDEO_SERVER = 2,
- UNITTYPE_VIDEO_USER = 3,
+enum pcb_video_type {
+ PCB_DVI_SL,
+ PCB_DP_165MPIX,
+ PCB_DP_300MPIX,
+ PCB_HDMI,
+ PCB_DP_1_2,
+ PCB_HDMI_2_0,
};
-enum {
- UNITTYPEPCB_DVI = 0,
- UNITTYPEPCB_DP_165 = 1,
- UNITTYPEPCB_DP_300 = 2,
- UNITTYPEPCB_HDMI = 3,
+enum pcb_transmission_type {
+ PCB_CAT_1G,
+ PCB_FIBER_3G,
+ PCB_CAT_10G,
+ PCB_FIBER_10G,
};
-enum {
- COMPRESSION_NONE = 0,
- COMPRESSION_TYPE_1 = 1,
- COMPRESSION_TYPE_1_2 = 3,
- COMPRESSION_TYPE_1_2_3 = 7,
+enum carrier_speed {
+ CARRIER_SPEED_1G,
+ CARRIER_SPEED_3G,
+ CARRIER_SPEED_2_5G = CARRIER_SPEED_3G,
+ CARRIER_SPEED_10G,
};
-enum {
- AUDIO_NONE = 0,
- AUDIO_TX = 1,
- AUDIO_RX = 2,
- AUDIO_RXTX = 3,
+enum ram_config {
+ RAM_DDR2_32BIT_295MBPS,
+ RAM_DDR3_32BIT_590MBPS,
+ RAM_DDR3_48BIT_590MBPS,
+ RAM_DDR3_64BIT_1800MBPS,
+ RAM_DDR3_48BIT_1800MBPS,
};
-enum {
- SYSCLK_147456 = 0,
+enum sysclock {
+ SYSCLK_147456,
};
-enum {
- RAM_DDR2_32 = 0,
- RAM_DDR3_32 = 1,
- RAM_DDR3_48 = 2,
+struct fpga_versions {
+ bool video_channel;
+ bool con_side;
+ enum pcb_video_type pcb_video_type;
+ enum pcb_transmission_type pcb_transmission_type;
+ unsigned int hw_version;
};
-enum {
- CARRIER_SPEED_1G = 0,
- CARRIER_SPEED_2_5G = 1,
+struct fpga_features {
+ u8 video_channels;
+ u8 carriers;
+ enum carrier_speed carrier_speed;
+ enum ram_config ram_config;
+ enum sysclock sysclock;
+
+ bool pcm_tx;
+ bool pcm_rx;
+ bool spdif_tx;
+ bool spdif_rx;
+ bool usb2;
+ bool rs232;
+ bool compression_type1;
+ bool compression_type2;
+ bool compression_type3;
+ bool interlace;
+ bool osd;
+ bool compression_pipes;
};
-bool ioep_fpga_has_osd(unsigned int fpga)
+#ifdef CONFIG_SYS_FPGA_FLAVOR_GAZERBEAM
+
+static int get_versions(unsigned int fpga, struct fpga_versions *versions)
{
- u16 fpga_features;
- unsigned feature_osd;
+ enum {
+ VERSIONS_FPGA_VIDEO_CHANNEL = BIT(12),
+ VERSIONS_FPGA_CON_SIDE = BIT(13),
+ VERSIONS_FPGA_SC = BIT(14),
+ VERSIONS_PCB_CON = BIT(9),
+ VERSIONS_PCB_SC = BIT(8),
+ VERSIONS_PCB_VIDEO_MASK = 0x3 << 6,
+ VERSIONS_PCB_VIDEO_DP_1_2 = 0x0 << 6,
+ VERSIONS_PCB_VIDEO_HDMI_2_0 = 0x1 << 6,
+ VERSIONS_PCB_TRANSMISSION_MASK = 0x3 << 4,
+ VERSIONS_PCB_TRANSMISSION_FIBER_10G = 0x0 << 4,
+ VERSIONS_PCB_TRANSMISSION_CAT_10G = 0x1 << 4,
+ VERSIONS_PCB_TRANSMISSION_FIBER_3G = 0x2 << 4,
+ VERSIONS_PCB_TRANSMISSION_CAT_1G = 0x3 << 4,
+ VERSIONS_HW_VER_MASK = 0xf << 0,
+ };
+ u16 raw_versions;
+
+ memset(versions, 0, sizeof(struct fpga_versions));
+
+ FPGA_GET_REG(fpga, versions, &raw_versions);
+
+ versions->video_channel = raw_versions & VERSIONS_FPGA_VIDEO_CHANNEL;
+ versions->con_side = raw_versions & VERSIONS_FPGA_CON_SIDE;
+
+ switch (raw_versions & VERSIONS_PCB_VIDEO_MASK) {
+ case VERSIONS_PCB_VIDEO_DP_1_2:
+ versions->pcb_video_type = PCB_DP_1_2;
+ break;
+
+ case VERSIONS_PCB_VIDEO_HDMI_2_0:
+ versions->pcb_video_type = PCB_HDMI_2_0;
+ break;
+ }
+
+ switch (raw_versions & VERSIONS_PCB_TRANSMISSION_MASK) {
+ case VERSIONS_PCB_TRANSMISSION_FIBER_10G:
+ versions->pcb_transmission_type = PCB_FIBER_10G;
+ break;
+
+ case VERSIONS_PCB_TRANSMISSION_CAT_10G:
+ versions->pcb_transmission_type = PCB_CAT_10G;
+ break;
+
+ case VERSIONS_PCB_TRANSMISSION_FIBER_3G:
+ versions->pcb_transmission_type = PCB_FIBER_3G;
+ break;
+
+ case VERSIONS_PCB_TRANSMISSION_CAT_1G:
+ versions->pcb_transmission_type = PCB_CAT_1G;
+ break;
+
+ }
- FPGA_GET_REG(0, fpga_features, &fpga_features);
- feature_osd = fpga_features & (1<<11);
+ versions->hw_version = raw_versions & VERSIONS_HW_VER_MASK;
- return feature_osd;
+ return 0;
}
-void ioep_fpga_print_info(unsigned int fpga)
+static int get_features(unsigned int fpga, struct fpga_features *features)
{
- u16 versions;
- u16 fpga_version;
- u16 fpga_features;
- unsigned unit_type;
- unsigned unit_type_pcb_video;
- unsigned feature_compression;
- unsigned feature_osd;
- unsigned feature_audio;
- unsigned feature_sysclock;
- unsigned feature_ramconfig;
- unsigned feature_carrier_speed;
- unsigned feature_carriers;
- unsigned feature_video_channels;
-
- FPGA_GET_REG(fpga, versions, &versions);
- FPGA_GET_REG(fpga, fpga_version, &fpga_version);
- FPGA_GET_REG(fpga, fpga_features, &fpga_features);
-
- unit_type = (versions & 0xf000) >> 12;
- unit_type_pcb_video = (versions & 0x01c0) >> 6;
- feature_compression = (fpga_features & 0xe000) >> 13;
- feature_osd = fpga_features & (1<<11);
- feature_audio = (fpga_features & 0x0600) >> 9;
- feature_sysclock = (fpga_features & 0x0180) >> 7;
- feature_ramconfig = (fpga_features & 0x0060) >> 5;
- feature_carrier_speed = fpga_features & (1<<4);
- feature_carriers = (fpga_features & 0x000c) >> 2;
- feature_video_channels = fpga_features & 0x0003;
-
- switch (unit_type) {
- case UNITTYPE_MAIN_SERVER:
- case UNITTYPE_MAIN_USER:
- printf("Mainchannel");
+ enum {
+ FEATURE_SPDIF_RX = BIT(15),
+ FEATURE_SPDIF_TX = BIT(14),
+ FEATURE_PCM_RX = BIT(13),
+ FEATURE_PCM_TX = BIT(12),
+ FEATURE_RAM_MASK = GENMASK(11, 8),
+ FEATURE_RAM_DDR2_32BIT_295MBPS = 0x0 << 8,
+ FEATURE_RAM_DDR3_32BIT_590MBPS = 0x1 << 8,
+ FEATURE_RAM_DDR3_48BIT_590MBPS = 0x2 << 8,
+ FEATURE_RAM_DDR3_64BIT_1800MBPS = 0x3 << 8,
+ FEATURE_RAM_DDR3_48BIT_1800MBPS = 0x4 << 8,
+ FEATURE_CARRIER_SPEED_MASK = GENMASK(7, 6),
+ FEATURE_CARRIER_SPEED_1G = 0x0 << 6,
+ FEATURE_CARRIER_SPEED_2_5G = 0x1 << 6,
+ FEATURE_CARRIER_SPEED_10G = 0x2 << 6,
+ FEATURE_CARRIERS_MASK = GENMASK(5, 4),
+ FEATURE_CARRIERS_0 = 0x0 << 4,
+ FEATURE_CARRIERS_1 = 0x1 << 4,
+ FEATURE_CARRIERS_2 = 0x2 << 4,
+ FEATURE_CARRIERS_4 = 0x3 << 4,
+ FEATURE_USB2 = BIT(3),
+ FEATURE_VIDEOCHANNELS_MASK = GENMASK(2, 0),
+ FEATURE_VIDEOCHANNELS_0 = 0x0 << 0,
+ FEATURE_VIDEOCHANNELS_1 = 0x1 << 0,
+ FEATURE_VIDEOCHANNELS_1_1 = 0x2 << 0,
+ FEATURE_VIDEOCHANNELS_2 = 0x3 << 0,
+ };
+
+ enum {
+ EXT_FEATURE_OSD = BIT(15),
+ EXT_FEATURE_ETHERNET = BIT(9),
+ EXT_FEATURE_INTERLACE = BIT(8),
+ EXT_FEATURE_RS232 = BIT(7),
+ EXT_FEATURE_COMPRESSION_PERF_MASK = GENMASK(6, 4),
+ EXT_FEATURE_COMPRESSION_PERF_1X = 0x0 << 4,
+ EXT_FEATURE_COMPRESSION_PERF_2X = 0x1 << 4,
+ EXT_FEATURE_COMPRESSION_PERF_4X = 0x2 << 4,
+ EXT_FEATURE_COMPRESSION_TYPE1 = BIT(0),
+ EXT_FEATURE_COMPRESSION_TYPE2 = BIT(1),
+ EXT_FEATURE_COMPRESSION_TYPE3 = BIT(2),
+ };
+
+ u16 raw_features;
+ u16 raw_extended_features;
+
+ memset(features, 0, sizeof(struct fpga_features));
+
+ FPGA_GET_REG(fpga, fpga_features, &raw_features);
+ FPGA_GET_REG(fpga, fpga_ext_features, &raw_extended_features);
+
+ switch (raw_features & FEATURE_VIDEOCHANNELS_MASK) {
+ case FEATURE_VIDEOCHANNELS_0:
+ features->video_channels = 0;
break;
- case UNITTYPE_VIDEO_SERVER:
- case UNITTYPE_VIDEO_USER:
- printf("Videochannel");
+ case FEATURE_VIDEOCHANNELS_1:
+ features->video_channels = 1;
break;
- default:
- printf("UnitType %d(not supported)", unit_type);
+ case FEATURE_VIDEOCHANNELS_1_1:
+ case FEATURE_VIDEOCHANNELS_2:
+ features->video_channels = 2;
break;
- }
+ };
- switch (unit_type) {
- case UNITTYPE_MAIN_SERVER:
- case UNITTYPE_VIDEO_SERVER:
- printf(" Server");
- if (versions & (1<<4))
- printf(" UC");
+ switch (raw_features & FEATURE_CARRIERS_MASK) {
+ case FEATURE_CARRIERS_0:
+ features->carriers = 0;
break;
- case UNITTYPE_MAIN_USER:
- case UNITTYPE_VIDEO_USER:
- printf(" User");
+ case FEATURE_CARRIERS_1:
+ features->carriers = 1;
break;
- default:
+ case FEATURE_CARRIERS_2:
+ features->carriers = 2;
+ break;
+
+ case FEATURE_CARRIERS_4:
+ features->carriers = 4;
break;
}
- if (versions & (1<<5))
- printf(" Fiber");
- else
- printf(" CAT");
+ switch (raw_features & FEATURE_CARRIER_SPEED_MASK) {
+ case FEATURE_CARRIER_SPEED_1G:
+ features->carrier_speed = CARRIER_SPEED_1G;
+ break;
+ case FEATURE_CARRIER_SPEED_2_5G:
+ features->carrier_speed = CARRIER_SPEED_2_5G;
+ break;
+ case FEATURE_CARRIER_SPEED_10G:
+ features->carrier_speed = CARRIER_SPEED_10G;
+ break;
+ }
- switch (unit_type_pcb_video) {
- case UNITTYPEPCB_DVI:
- printf(" DVI,");
+ switch (raw_features & FEATURE_RAM_MASK) {
+ case FEATURE_RAM_DDR2_32BIT_295MBPS:
+ features->ram_config = RAM_DDR2_32BIT_295MBPS;
break;
- case UNITTYPEPCB_DP_165:
- printf(" DP 165MPix/s,");
+ case FEATURE_RAM_DDR3_32BIT_590MBPS:
+ features->ram_config = RAM_DDR3_32BIT_590MBPS;
break;
- case UNITTYPEPCB_DP_300:
- printf(" DP 300MPix/s,");
+ case FEATURE_RAM_DDR3_48BIT_590MBPS:
+ features->ram_config = RAM_DDR3_48BIT_590MBPS;
break;
- case UNITTYPEPCB_HDMI:
- printf(" HDMI,");
+ case FEATURE_RAM_DDR3_64BIT_1800MBPS:
+ features->ram_config = RAM_DDR3_64BIT_1800MBPS;
+ break;
+
+ case FEATURE_RAM_DDR3_48BIT_1800MBPS:
+ features->ram_config = RAM_DDR3_48BIT_1800MBPS;
break;
}
- printf(" FPGA V %d.%02d\n features:",
- fpga_version / 100, fpga_version % 100);
+ features->pcm_tx = raw_features & FEATURE_PCM_TX;
+ features->pcm_rx = raw_features & FEATURE_PCM_RX;
+ features->spdif_tx = raw_features & FEATURE_SPDIF_TX;
+ features->spdif_rx = raw_features & FEATURE_SPDIF_RX;
+ features->usb2 = raw_features & FEATURE_USB2;
+ features->rs232 = raw_extended_features & EXT_FEATURE_RS232;
+ features->compression_type1 = raw_extended_features &
EXT_FEATURE_COMPRESSION_TYPE1;
+ features->compression_type2 = raw_extended_features &
EXT_FEATURE_COMPRESSION_TYPE2;
+ features->compression_type3 = raw_extended_features &
EXT_FEATURE_COMPRESSION_TYPE3;
+ features->interlace = raw_extended_features & EXT_FEATURE_INTERLACE;
+ features->osd = raw_extended_features & EXT_FEATURE_OSD;
+ features->compression_pipes = raw_extended_features &
EXT_FEATURE_COMPRESSION_PERF_MASK;
+
+ return 0;
+}
+
+#else
+
+static int get_versions(unsigned int fpga, struct fpga_versions *versions)
+{
+ enum {
+ /* HW version encoding is a mess, leave it for the moment */
+ VERSIONS_HW_VER_MASK = 0xf << 0,
+ VERSIONS_PIX_CLOCK_GEN_IDT8N3QV01 = BIT(4),
+ VERSIONS_SFP = BIT(5),
+ VERSIONS_VIDEO_MASK = 0x7 << 6,
+ VERSIONS_VIDEO_DVI = 0x0 << 6,
+ VERSIONS_VIDEO_DP_165 = 0x1 << 6,
+ VERSIONS_VIDEO_DP_300 = 0x2 << 6,
+ VERSIONS_VIDEO_HDMI = 0x3 << 6,
+ VERSIONS_UT_MASK = 0xf << 12,
+ VERSIONS_UT_MAIN_SERVER = 0x0 << 12,
+ VERSIONS_UT_MAIN_USER = 0x1 << 12,
+ VERSIONS_UT_VIDEO_SERVER = 0x2 << 12,
+ VERSIONS_UT_VIDEO_USER = 0x3 << 12,
+ };
+ u16 raw_versions;
+
+ memset(versions, 0, sizeof(struct fpga_versions));
+
+ FPGA_GET_REG(fpga, versions, &raw_versions);
+
+ switch (raw_versions & VERSIONS_UT_MASK) {
+ case VERSIONS_UT_MAIN_SERVER:
+ versions->video_channel = false;
+ versions->con_side = false;
+ break;
+
+ case VERSIONS_UT_MAIN_USER:
+ versions->video_channel = false;
+ versions->con_side = true;
+ break;
+ case VERSIONS_UT_VIDEO_SERVER:
+ versions->video_channel = true;
+ versions->con_side = false;
+ break;
- switch (feature_compression) {
- case COMPRESSION_NONE:
- printf(" no compression");
+ case VERSIONS_UT_VIDEO_USER:
+ versions->video_channel = true;
+ versions->con_side = true;
break;
- case COMPRESSION_TYPE_1:
- printf(" compression type1(delta)");
+ }
+
+ switch (raw_versions & VERSIONS_VIDEO_MASK) {
+ case VERSIONS_VIDEO_DVI:
+ versions->pcb_video_type = PCB_DVI_SL;
break;
- case COMPRESSION_TYPE_1_2:
- printf(" compression type1(delta), type2(inline)");
+ case VERSIONS_VIDEO_DP_165:
+ versions->pcb_video_type = PCB_DP_165MPIX;
break;
- case COMPRESSION_TYPE_1_2_3:
- printf(" compression type1(delta), type2(inline),
type3(intempo)");
+ case VERSIONS_VIDEO_DP_300:
+ versions->pcb_video_type = PCB_DP_300MPIX;
break;
- default:
- printf(" compression %d(not supported)", feature_compression);
+ case VERSIONS_VIDEO_HDMI:
+ versions->pcb_video_type = PCB_HDMI;
break;
}
- printf(", %sosd", feature_osd ? "" : "no ");
+ versions->hw_version = raw_versions & VERSIONS_HW_VER_MASK;
- switch (feature_audio) {
- case AUDIO_NONE:
- printf(", no audio");
+ if (raw_versions & VERSIONS_SFP)
+ versions->pcb_transmission_type = PCB_FIBER_3G;
+ else
+ versions->pcb_transmission_type = PCB_CAT_1G;
+
+ return 0;
+}
+
+static int get_features(unsigned int fpga, struct fpga_features *features)
+{
+ enum {
+ FEATURE_CARRIER_SPEED_2_5 = BIT(4),
+ FEATURE_RAM_MASK = 0x7 << 5,
+ FEATURE_RAM_DDR2_32BIT = 0x0 << 5,
+ FEATURE_RAM_DDR3_32BIT = 0x1 << 5,
+ FEATURE_RAM_DDR3_48BIT = 0x2 << 5,
+ FEATURE_PCM_AUDIO_TX = BIT(9),
+ FEATURE_PCM_AUDIO_RX = BIT(10),
+ FEATURE_OSD = BIT(11),
+ FEATURE_USB20 = BIT(12),
+ FEATURE_COMPRESSION_MASK = 7 << 13,
+ FEATURE_COMPRESSION_TYPE1 = 0x1 << 13,
+ FEATURE_COMPRESSION_TYPE1_TYPE2 = 0x3 << 13,
+ FEATURE_COMPRESSION_TYPE1_TYPE2_TYPE3 = 0x7 << 13,
+ };
+
+ enum {
+ EXTENDED_FEATURE_SPDIF_AUDIO_TX = BIT(0),
+ EXTENDED_FEATURE_SPDIF_AUDIO_RX = BIT(1),
+ EXTENDED_FEATURE_RS232 = BIT(2),
+ EXTENDED_FEATURE_COMPRESSION_PIPES = BIT(3),
+ EXTENDED_FEATURE_INTERLACE = BIT(4),
+ };
+
+ u16 raw_features;
+ u16 raw_extended_features;
+
+ memset(features, 0, sizeof(struct fpga_features));
+
+ FPGA_GET_REG(fpga, fpga_features, &raw_features);
+ FPGA_GET_REG(fpga, fpga_ext_features, &raw_extended_features);
+
+ features->video_channels = raw_features & 0x3;
+ features->carriers = (raw_features >> 2) & 0x3;
+
+ features->carrier_speed = (raw_features & FEATURE_CARRIER_SPEED_2_5)
+ ? CARRIER_SPEED_2_5G : CARRIER_SPEED_1G;
+
+ switch (raw_features & FEATURE_RAM_MASK) {
+ case FEATURE_RAM_DDR2_32BIT:
+ features->ram_config = RAM_DDR2_32BIT_295MBPS;
break;
- case AUDIO_TX:
- printf(", audio tx");
+ case FEATURE_RAM_DDR3_32BIT:
+ features->ram_config = RAM_DDR3_32BIT_590MBPS;
break;
- case AUDIO_RX:
- printf(", audio rx");
+ case FEATURE_RAM_DDR3_48BIT:
+ features->ram_config = RAM_DDR3_48BIT_590MBPS;
break;
+ }
- case AUDIO_RXTX:
- printf(", audio rx+tx");
+ features->pcm_tx = raw_features & FEATURE_PCM_AUDIO_TX;
+ features->pcm_rx = raw_features & FEATURE_PCM_AUDIO_RX;
+ features->spdif_tx = raw_extended_features &
EXTENDED_FEATURE_SPDIF_AUDIO_TX;
+ features->spdif_rx = raw_extended_features &
EXTENDED_FEATURE_SPDIF_AUDIO_RX;
+
+ features->usb2 = raw_features & FEATURE_USB20;
+ features->rs232 = raw_extended_features & EXTENDED_FEATURE_RS232;
+
+ features->compression_type1 = false;
+ features->compression_type2 = false;
+ features->compression_type3 = false;
+ switch (raw_features & FEATURE_COMPRESSION_MASK) {
+ case FEATURE_COMPRESSION_TYPE1_TYPE2_TYPE3:
+ features->compression_type3 = true;
+ case FEATURE_COMPRESSION_TYPE1_TYPE2:
+ features->compression_type2 = true;
+ case FEATURE_COMPRESSION_TYPE1:
+ features->compression_type1 = true;
break;
+ }
+
+ features->interlace = raw_extended_features &
EXTENDED_FEATURE_INTERLACE;
+ features->osd = raw_features & FEATURE_OSD;
+ features->compression_pipes = raw_extended_features &
EXTENDED_FEATURE_COMPRESSION_PIPES;
- default:
- printf(", audio %d(not supported)", feature_audio);
+ return 0;
+}
+
+#endif
+
+bool ioep_fpga_has_osd(unsigned int fpga)
+{
+ struct fpga_features features;
+
+ get_features(fpga, &features);
+
+ return features.osd;
+}
+
+void ioep_fpga_print_info(unsigned int fpga)
+{
+ u16 fpga_version;
+ struct fpga_versions versions;
+ struct fpga_features features;
+
+ FPGA_GET_REG(fpga, fpga_version, &fpga_version);
+ get_versions(fpga, &versions);
+ get_features(fpga, &features);
+
+ if (versions.video_channel)
+ printf("Videochannel");
+ else
+ printf("Mainchannel");
+
+ if (versions.con_side)
+ printf(" User");
+ else
+ printf(" Server");
+
+// FIXME
+#if 0
+ if (versions & (1<<4))
+ printf(" UC");
+#endif
+
+ switch(versions.pcb_transmission_type) {
+ case PCB_CAT_1G:
+ case PCB_CAT_10G:
+ printf(" CAT");
+ break;
+ case PCB_FIBER_3G:
+ case PCB_FIBER_10G:
+ printf(" Fiber");
+ break;
+ };
+
+ switch (versions.pcb_video_type) {
+ case PCB_DVI_SL:
+ printf(" DVI,");
+ break;
+ case PCB_DP_165MPIX:
+ printf(" DP 165MPix/s,");
+ break;
+ case PCB_DP_300MPIX:
+ printf(" DP 300MPix/s,");
+ break;
+ case PCB_HDMI:
+ printf(" HDMI,");
+ break;
+ case PCB_DP_1_2:
+ printf(" DP 1.2,");
+ break;
+ case PCB_HDMI_2_0:
+ printf(" HDMI 2.0,");
break;
}
+ printf(" FPGA V %d.%02d\n features: ",
+ fpga_version / 100, fpga_version % 100);
+
+ if (!features.compression_type1 &&
+ !features.compression_type2 &&
+ !features.compression_type3)
+ printf("no compression, ");
+
+ if (features.compression_type1)
+ printf("type1-deltacompression, ");
+
+ if (features.compression_type2)
+ printf("type2-inlinecompression, ");
+
+ if (features.compression_type3)
+ printf("type3-intempocompression, ");
+
+ printf("%sosd", features.osd ? "" : "no ");
+
+ if (features.pcm_rx && features.pcm_tx)
+ printf(", pcm rx+tx");
+ else if(features.pcm_rx)
+ printf(", pcm rx");
+ else if(features.pcm_tx)
+ printf(", pcm tx");
+
+ if (features.spdif_rx && features.spdif_tx)
+ printf(", spdif rx+tx");
+ else if(features.spdif_rx)
+ printf(", spdif rx");
+ else if(features.spdif_tx)
+ printf(", spdif tx");
+
puts(",\n ");
- switch (feature_sysclock) {
+ switch (features.sysclock) {
case SYSCLK_147456:
printf("clock 147.456 MHz");
break;
-
- default:
- printf("clock %d(not supported)", feature_sysclock);
- break;
}
- switch (feature_ramconfig) {
- case RAM_DDR2_32:
+ switch (features.ram_config) {
+ case RAM_DDR2_32BIT_295MBPS:
printf(", RAM 32 bit DDR2");
break;
-
- case RAM_DDR3_32:
+ case RAM_DDR3_32BIT_590MBPS:
printf(", RAM 32 bit DDR3");
break;
-
- case RAM_DDR3_48:
+ case RAM_DDR3_48BIT_590MBPS:
+ case RAM_DDR3_48BIT_1800MBPS:
printf(", RAM 48 bit DDR3");
break;
-
- default:
- printf(", RAM %d(not supported)", feature_ramconfig);
+ case RAM_DDR3_64BIT_1800MBPS:
+ printf(", RAM 64 bit DDR3");
break;
}
- printf(", %d carrier(s) %s", feature_carriers,
- feature_carrier_speed ? "2.5Gbit/s" : "1Gbit/s");
+ printf(", %d carrier(s)", features.carriers);
+
+ switch(features.carrier_speed) {
+ case CARRIER_SPEED_1G:
+ printf(", 1Gbit/s");
+ break;
+ case CARRIER_SPEED_3G:
+ printf(", 3Gbit/s");
+ break;
+ case CARRIER_SPEED_10G:
+ printf(", 10Gbit/s");
+ break;
+ }
- printf(", %d video channel(s)\n", feature_video_channels);
+ printf(", %d video channel(s)\n", features.video_channels);
}
#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */
diff --git a/board/gdsys/mpc8308/Kconfig b/board/gdsys/mpc8308/Kconfig
index 80ac1a0f8a..79d0dc9829 100644
--- a/board/gdsys/mpc8308/Kconfig
+++ b/board/gdsys/mpc8308/Kconfig
@@ -55,6 +55,25 @@ config GDSYS_LEGACY_DRIVERS
endif
+if TARGET_GAZERBEAM
+
+config SYS_BOARD
+ default "mpc8308"
+
+config SYS_VENDOR
+ default "gdsys"
+
+config SYS_CONFIG_NAME
+ default "gazerbeam"
+
+config SYS_FPGA1_BASE
+ default E0700000
+
+config SYS_FPGA1_SIZE
+ default 1
+
+endif
+
choice
prompt "FPGA flavor selection"
diff --git a/board/gdsys/mpc8308/MAINTAINERS b/board/gdsys/mpc8308/MAINTAINERS
index 3895b01732..a986ae3664 100644
--- a/board/gdsys/mpc8308/MAINTAINERS
+++ b/board/gdsys/mpc8308/MAINTAINERS
@@ -6,5 +6,7 @@ F: include/configs/hrcon.h
F: configs/hrcon_defconfig
F: configs/hrcon_dh_defconfig
F: include/configs/strider.h
+F: configs/strider_defconfig
F: configs/strider_cpu_defconfig
F: configs/strider_con_defconfig
+F: configs/gazerbeam_defconfig
diff --git a/board/gdsys/mpc8308/Makefile b/board/gdsys/mpc8308/Makefile
index 42702fb967..bafb9beaaf 100644
--- a/board/gdsys/mpc8308/Makefile
+++ b/board/gdsys/mpc8308/Makefile
@@ -8,3 +8,4 @@
obj-y := mpc8308.o sdram.o
obj-$(CONFIG_HRCON) += hrcon.o
obj-$(CONFIG_STRIDER) += strider.o
+obj-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.o
diff --git a/board/gdsys/mpc8308/gazerbeam.c b/board/gdsys/mpc8308/gazerbeam.c
new file mode 100644
index 0000000000..a86333d92c
--- /dev/null
+++ b/board/gdsys/mpc8308/gazerbeam.c
@@ -0,0 +1,332 @@
+/*
+ * (C) Copyright 2015
+ * Dirk Eibach, Guntermann & Drunck GmbH, eib...@gdsys.de
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+#include <fsl_esdhc.h>
+#include <gdsys_rxaui_ctrl.h>
+#include <marvell-phy.h>
+#include <miiphy.h>
+#include <tpm.h>
+#include <i2c.h>
+#include <asm/fsl_mpc83xx_serdes.h>
+#include <asm/gpio.h>
+
+#include "../../../drivers/net/phy/mv88x2.h"
+#include "../common/ihs_mdio.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct ihs_mdio_info ihs_mdio_info[] = {
+ { .fpga = NULL, .name = "ihs0", .clause45 = true, .base = 0x58 },
+ { .fpga = NULL, .name = "ihs1", .clause45 = true, .base = 0x58 },
+};
+
+int child_find_by_name(struct udevice *parent, const char *dev_name,
+ struct udevice **child)
+{
+ struct udevice *dev = NULL;
+
+ for (device_find_first_child(parent, &dev);
+ dev;
+ device_find_next_child(&dev)) {
+ if (!strncmp(dev->name, dev_name, strlen(dev_name))) {
+ *child = dev;
+ return 0;
+ }
+ }
+
+ return -1;
+}
+
+int request_gpio_by_dev(struct gpio_desc *gpio, struct udevice *gpio_dev,
+ uint offset, char *gpio_name)
+{
+ gpio->dev = gpio_dev;
+ gpio->offset = offset;
+ gpio->flags = 0;
+
+ return dm_gpio_request(gpio, gpio_name);
+}
+
+void determine_board_type(struct of_board_fixup_data *data)
+{
+ struct udevice *i2c_bus;
+ struct udevice *dummy;
+ struct udevice *gpio_dev = NULL;
+ struct gpio_desc gpio;
+ char name[16];
+
+ uclass_get_device_by_name(UCLASS_I2C, "i2c@3100", &i2c_bus);
+
+ if (!i2c_bus) {
+ puts("Could not get I2C bus\n");
+ return;
+ }
+
+ data->mc2 = !dm_i2c_probe(i2c_bus, 0x20, 0, &dummy);
+ data->mc4 = !dm_i2c_probe(i2c_bus, 0x22, 0, &dummy);
+
+ if (data->mc2 && data->mc4) {
+ puts("Board hardware configuration inconsistent.");
+ return;
+ }
+
+ snprintf(name, sizeof(name), "pca9698@%x", data->mc4 ? 0x22 : 0x20);
+
+ if (child_find_by_name(i2c_bus, name, &gpio_dev)) {
+ printf("Could not find child %s of device %s\n", name,
+ i2c_bus->name);
+ return;
+ }
+
+ device_probe(gpio_dev);
+
+ if (!data->mc4) {
+ if (!request_gpio_by_dev(&gpio, gpio_dev, 0, "var-mc_sc"))
+ data->mc2 = !dm_gpio_get_value(&gpio);
+ else
+ puts("Could not query var-mc_sc GPIO.\n");
+
+ dm_gpio_free(gpio_dev, &gpio);
+ }
+
+ if (!request_gpio_by_dev(&gpio, gpio_dev, 11, "var-con"))
+ data->var_con = dm_gpio_get_value(&gpio);
+ else
+ puts("Could not query var-con GPIO.\n");
+
+ dm_gpio_free(gpio_dev, &gpio);
+}
+
+int board_fix_fdt_get_info(void)
+{
+ struct of_board_fixup_data data;
+
+ determine_board_type(&data);
+
+ gd->board_fixup_data.var_con = data.var_con;
+ gd->board_fixup_data.mc2 = data.mc2;
+ gd->board_fixup_data.mc4 = data.mc4;
+
+ return 0;
+}
+
+int fdt_disable_by_ofname(void *rw_fdt_blob, char *ofname)
+{
+ int offset = fdt_path_offset(rw_fdt_blob, ofname);
+
+ return fdt_status_disabled(rw_fdt_blob, offset);
+}
+
+int board_fix_fdt_change(void *rw_fdt_blob)
+{
+ struct of_board_fixup_data data = gd->board_fixup_data;
+
+ if (!data.mc4) {
+ fdt_disable_by_ofname(rw_fdt_blob,
+ "/localbus@e0005000/iocon_uart@2,0");
+ fdt_disable_by_ofname(rw_fdt_blob, "/fpga1bus");
+ }
+
+ if (!data.mc2 || !data.var_con) {
+ fdt_disable_by_ofname(rw_fdt_blob, "/fpga0bus/fpga0_video1");
+ fdt_disable_by_ofname(rw_fdt_blob,
"/fpga0bus/fpga0_iic_video1");
+ fdt_disable_by_ofname(rw_fdt_blob,
"/fpga0bus/fpga0_axi_video1");
+ }
+
+ if (!data.var_con) {
+ fdt_disable_by_ofname(rw_fdt_blob, "/fpga0bus/fpga0_video0");
+ fdt_disable_by_ofname(rw_fdt_blob,
"/fpga0bus/fpga0_iic_video0");
+ fdt_disable_by_ofname(rw_fdt_blob,
"/fpga0bus/fpga0_axi_video0");
+ }
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ struct of_board_fixup_data data = gd->board_fixup_data;
+ char *s = getenv("serial#");
+
+ puts("Board: Gazerbeam ");
+ printf("%s ", data.mc4 ? "MC4" : data.mc2 ? "MC2" : "SC");
+ printf("%s", data.var_con ? "CON" : "CPU");
+
+ if (s) {
+ puts(", serial# ");
+ puts(s);
+ }
+
+ puts("\n");
+
+ return 0;
+}
+
+int last_stage_init(void)
+{
+ uint fpga_hw_rev = 0;
+ uint k = 0;
+ struct udevice *fpga;
+ struct udevice *rxaui;
+ struct udevice *i2c_bus;
+ struct udevice *gpio_dev;
+ char name[16];
+
+ uclass_get_device_by_name(UCLASS_I2C, "i2c@3000", &i2c_bus);
+
+ if (child_find_by_name(i2c_bus, "pca9698@20", &gpio_dev)) {
+ printf("Could not find child %s of device %s\n", name,
+ i2c_bus->name);
+ return -1;
+ }
+
+ device_probe(gpio_dev);
+
+ for (k = 0; k < 4; ++k) {
+ struct gpio_desc gpio;
+
+ snprintf(name, sizeof(name), "fpga_hw_rev%d", k);
+
+ if (!request_gpio_by_dev(&gpio, gpio_dev, 12 + k, name))
+ fpga_hw_rev |= dm_gpio_get_value(&gpio) ? BIT(k) : 0;
+ }
+
+ setenv_ulong("fpga_hw_rev", fpga_hw_rev);
+
+ if (tpm_init() || tpm_startup(TPM_ST_CLEAR) ||
+ tpm_continue_self_test()) {
+ printf("TPM init failed\n");
+ }
+
+ if (fpga_hw_rev >= 4) {
+ for (uclass_find_first_device(UCLASS_RXAUI_CTRL, &rxaui);
+ rxaui;
+ uclass_find_next_device(&rxaui)) {
+ rxaui_disable_polarity_inversion(rxaui);
+ }
+ }
+
+ for (uclass_find_first_device(UCLASS_IHS_FPGA, &fpga);
+ fpga;
+ uclass_find_next_device(&fpga)) {
+ struct mii_dev *bus;
+
+ device_probe(fpga);
+
+ if (fpga->seq < 0)
+ continue;
+
+ ihs_mdio_info[fpga->seq].fpga = fpga;
+
+ ihs_mdio_init(&ihs_mdio_info[fpga->seq]);
+ bus = miiphy_get_dev_by_name(fpga->seq ? "ihs1" : "ihs0");
+ if (bus) {
+ struct phy_device *phydev;
+
+ phydev = phy_find_by_mask_c45(bus, 1,
+ PHY_INTERFACE_MODE_XGMII);
+ if (phydev)
+ phy_config(phydev);
+ }
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_FSL_ESDHC
+int board_mmc_init(bd_t *bd)
+{
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ sysconf83xx_t *sysconf = &immr->sysconf;
+
+ /* Enable cache snooping in eSDHC system configuration register */
+ out_be32(&sysconf->sdhccr, 0x02000000);
+
+ return fsl_esdhc_mmc_init(bd);
+}
+#endif
+
+static struct pci_region pcie_regions_0[] = {
+ {
+ .bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
+ .phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
+ .size = CONFIG_SYS_PCIE1_MEM_SIZE,
+ .flags = PCI_REGION_MEM,
+ },
+ {
+ .bus_start = CONFIG_SYS_PCIE1_IO_BASE,
+ .phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
+ .size = CONFIG_SYS_PCIE1_IO_SIZE,
+ .flags = PCI_REGION_IO,
+ },
+};
+
+void pci_init_board(void)
+{
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ sysconf83xx_t *sysconf = &immr->sysconf;
+ law83xx_t *pcie_law = sysconf->pcielaw;
+ struct pci_region *pcie_reg[] = { pcie_regions_0 };
+
+ fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+
+ /* Deassert the resets in the control register */
+ out_be32(&sysconf->pecr1, 0xE0008000);
+ udelay(2000);
+
+ /* Configure PCI Express Local Access Windows */
+ out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
+ out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
+
+ mpc83xx_pcie_init(1, pcie_reg);
+}
+
+ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
+{
+ info->portwidth = FLASH_CFI_16BIT;
+ info->chipwidth = FLASH_CFI_BY16;
+ info->interface = FLASH_CFI_X16;
+ return 1;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+ fsl_fdt_fixup_dr_usb(blob, bd);
+ fdt_fixup_esdhc(blob, bd);
+
+ return 0;
+}
+#endif
+
+int board_m88e1510_config(struct phy_device *phydev)
+{
+ /* Select page 3 */
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 3);
+
+ /* Configure LEDs */
+ m88e1518_phy_writebits(phydev, 16, 0, 4, 4);
+ m88e1518_phy_writebits(phydev, 16, 4, 4, 8);
+ m88e1518_phy_writebits(phydev, 16, 8, 4, 0);
+
+ /* Reset page selection */
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 0);
+
+ return 0;
+}
+
+int board_mv88x2_config(struct mv88x2_config_data *data)
+{
+ data->sfi_pol = (getenv_ulong("fpga_hw_rev", 10, 0) < 4) ? 0x0f03 : 0;
+
+ return 0;
+}
diff --git a/configs/gazerbeam_defconfig b/configs/gazerbeam_defconfig
new file mode 100644
index 0000000000..4fc92ea19b
--- /dev/null
+++ b/configs/gazerbeam_defconfig
@@ -0,0 +1,76 @@
+CONFIG_PPC=y
+CONFIG_SYS_MALLOC_F_LEN=0x600
+CONFIG_IDENT_STRING=" gazerbeam 0.01"
+CONFIG_MPC83xx=y
+CONFIG_TARGET_GAZERBEAM=y
+CONFIG_SYS_FPGA_FLAVOR_GAZERBEAM=y
+CONFIG_CMD_IOLOOP=y
+CONFIG_DEFAULT_DEVICE_TREE="gazerbeam"
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=5
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_STOP_STR=" "
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_IHS_FPGA=y
+CONFIG_CMD_IHS_AXI=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_MII=y
+CONFIG_CMD_MII_DRIVER=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_HASH=y
+CONFIG_CMD_TPM=y
+CONFIG_CMD_EXT2=y
+CONFIG_DOS_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_BOARD_FIXUP=y
+CONFIG_OF_EMBED=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_ICS8N3QV01=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_MPC8XXX_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_FSL=y
+CONFIG_SYS_I2C_IHS=y
+CONFIG_MISC=y
+CONFIG_IHS_FPGA=y
+CONFIG_IHS_AXI=y
+CONFIG_IHS_VIDEO_OUT=y
+CONFIG_GDSYS_RXAUI_CTRL=y
+CONFIG_GDSYS_IOEP=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_CFI_FLASH=y
+CONFIG_PHYLIB=y
+CONFIG_PHYLIB_10G=y
+CONFIG_PHY_MARVELL=y
+CONFIG_BOARD_M88E1510_CONFIG=y
+CONFIG_PHY_MV88X2=y
+CONFIG_BOARD_MV88X2_CONFIG=y
+CONFIG_MV88X2_DEBUG_REGS=y
+CONFIG_MV88X2_LINE_10GBASE_R=y
+CONFIG_MV88X2_HOST_10GBASE_X2=y
+CONFIG_MV88X2_X2_DISPARITY=y
+CONFIG_MV88X2_LED0_SOLID=6
+CONFIG_MV88X2_LED1_SOLID=6
+CONFIG_MV88X2_HOST_LANE_MUX_2_PORT=0x0800
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
+CONFIG_TPM_ATMEL_TWI=y
+CONFIG_TPM_AUTH_SESSIONS=y
+CONFIG_TRANSMITTER=y
+CONFIG_LOGICORE_DP_TX=y
+CONFIG_TPM=y
diff --git a/include/configs/gazerbeam.h b/include/configs/gazerbeam.h
new file mode 100644
index 0000000000..a8d0474771
--- /dev/null
+++ b/include/configs/gazerbeam.h
@@ -0,0 +1,484 @@
+/*
+ * (C) Copyright 2015
+ * Dirk Eibach, Guntermann & Drunck GmbH, eib...@gdsys.de
+ *
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 family */
+#define CONFIG_MPC83xx 1 /* MPC83xx family */
+#define CONFIG_MPC830x 1 /* MPC830x family */
+#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */
+
+#define CONFIG_SYS_TEXT_BASE 0xFE000000
+
+#define CONFIG_LAST_STAGE_INIT
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+
+#define CONFIG_SYS_ALT_MEMTEST
+
+/*
+ * System Clock Setup
+ */
+#define CONFIG_83XX_CLKIN 33333333 /* in Hz */
+#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
+
+/*
+ * Hardware Reset Configuration Word
+ * if CLKIN is 66.66MHz, then
+ * CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz
+ * We choose the A type silicon as default, so the core is 400Mhz.
+ */
+#define CONFIG_SYS_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_2X1 |\
+ HRCWL_SVCOD_DIV_2 |\
+ HRCWL_CSB_TO_CLKIN_4X1 |\
+ HRCWL_CORE_TO_CSB_3X1)
+/*
+ * There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits
+ * in 8308's HRCWH according to the manual, but original Freescale's
+ * code has them and I've expirienced some problems using the board
+ * with BDI3000 attached when I've tried to set these bits to zero
+ * (UART doesn't work after the 'reset run' command).
+ */
+#define CONFIG_SYS_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0XFFF00100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY |\
+ HRCWH_TSEC1M_IN_RGMII |\
+ HRCWH_TSEC2M_IN_RGMII |\
+ HRCWH_BIG_ENDIAN)
+
+/*
+ * System IO Config
+ */
+ #define CONFIG_SYS_SICRH (\
+ SICRH_ESDHC_A_SD |\
+ SICRH_ESDHC_B_SD |\
+ SICRH_ESDHC_C_SD |\
+ SICRH_GPIO_A_TSEC2 |\
+ SICRH_GPIO_B_TSEC2_GTX_CLK125 |\
+ SICRH_IEEE1588_A_GPIO |\
+ SICRH_USB |\
+ SICRH_GTM_GPIO |\
+ SICRH_IEEE1588_B_GPIO |\
+ SICRH_ETSEC2_GPIO |\
+ SICRH_GPIOSEL_1 |\
+ SICRH_TMROBI_V3P3 |\
+ SICRH_TSOBI1_V2P5 |\
+ SICRH_TSOBI2_V2P5) /* 0x01b7f103 */
+ #define CONFIG_SYS_SICRL (\
+ SICRL_SPI_PF0 |\
+ SICRL_UART_PF0 |\
+ SICRL_IRQ_PF0 |\
+ SICRL_I2C2_PF0 |\
+ SICRL_ETSEC1_GTX_CLK125) /* 0x00000000 */
+
+/*
+ * IMMR new address
+ */
+#define CONFIG_SYS_IMMR 0xE0000000
+
+/*
+ * SERDES
+ */
+#define CONFIG_FSL_SERDES
+#define CONFIG_FSL_SERDES1 0xe3000
+
+/*
+ * Arbiter Setup
+ */
+#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */
+#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */
+#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
+ | DDRCDR_PZ_LOZ \
+ | DDRCDR_NZ_LOZ \
+ | DDRCDR_ODT \
+ | DDRCDR_Q_DRN)
+ /* 0x7b880001 */
+/*
+ * Manually set up DDR parameters
+ * consist of one chip NT5TU64M16HG from NANYA
+ */
+
+#define CONFIG_SYS_DDR_SIZE 128 /* MB */
+
+#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007
+#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \
+ | CSCONFIG_ODT_RD_NEVER \
+ | CSCONFIG_ODT_WR_ONLY_CURRENT \
+ | CSCONFIG_BANK_BIT_3 \
+ | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
+ /* 0x80010102 */
+#define CONFIG_SYS_DDR_TIMING_3 0
+#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
+ | (0 << TIMING_CFG0_WRT_SHIFT) \
+ | (0 << TIMING_CFG0_RRT_SHIFT) \
+ | (0 << TIMING_CFG0_WWT_SHIFT) \
+ | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
+ | (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
+ | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
+ | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
+ /* 0x00260802 */
+#define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \
+ | (6 << TIMING_CFG1_ACTTOPRE_SHIFT) \
+ | (2 << TIMING_CFG1_ACTTORW_SHIFT) \
+ | (7 << TIMING_CFG1_CASLAT_SHIFT) \
+ | (9 << TIMING_CFG1_REFREC_SHIFT) \
+ | (2 << TIMING_CFG1_WRREC_SHIFT) \
+ | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
+ | (2 << TIMING_CFG1_WRTORD_SHIFT))
+ /* 0x26279222 */
+#define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \
+ | (4 << TIMING_CFG2_CPO_SHIFT) \
+ | (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
+ | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
+ | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
+ | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
+ | (5 << TIMING_CFG2_FOUR_ACT_SHIFT))
+ /* 0x021848c5 */
+#define CONFIG_SYS_DDR_INTERVAL ((0x0824 <<
SDRAM_INTERVAL_REFINT_SHIFT) \
+ | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
+ /* 0x08240100 */
+#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \
+ | SDRAM_CFG_SDRAM_TYPE_DDR2 \
+ | SDRAM_CFG_DBW_16)
+ /* 0x43100000 */
+
+#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */
+#define CONFIG_SYS_DDR_MODE ((0x0440 << SDRAM_MODE_ESD_SHIFT) \
+ | (0x0242 << SDRAM_MODE_SD_SHIFT))
+ /* ODT 150ohm CL=4, AL=0 on SDRAM */
+#define CONFIG_SYS_DDR_MODE2 0x00000000
+
+/*
+ * Memory test
+ */
+#define CONFIG_SYS_MEMTEST_START 0x00001000 /* memtest region */
+#define CONFIG_SYS_MEMTEST_END 0x07f00000
+
+/*
+ * The reserved memory
+ */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of
monitor */
+
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CONFIG_SYS_INIT_RAM_LOCK 1
+#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
+#define CONFIG_SYS_LBC_LBCR 0x00040000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
+#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_FLASH_CFI_LEGACY
+#define CONFIG_SYS_FLASH_LEGACY_512Kx16
+
+#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */
+#define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */
+#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
+
+/* Window base at flash base */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB)
+
+#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \
+ | BR_PS_16 /* 16 bit port */ \
+ | BR_MS_GPCM /* MSEL = GPCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
+ | OR_UPM_XAM \
+ | OR_GPCM_CSNT \
+ | OR_GPCM_ACS_DIV2 \
+ | OR_GPCM_XACS \
+ | OR_GPCM_SCY_15 \
+ | OR_GPCM_TRLX_SET \
+ | OR_GPCM_EHTR_SET)
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 135
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+/* Window base at FPGA base */
+#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_FPGA0_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_1MB)
+#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_FPGA1_BASE
+#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_1MB)
+
+#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FPGA0_BASE \
+ | BR_PS_16 /* 16 bit port */ \
+ | BR_MS_GPCM /* MSEL = GPCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_FPGA0_SIZE) \
+ | OR_UPM_XAM \
+ | OR_GPCM_CSNT \
+ | OR_GPCM_SCY_5 \
+ | OR_GPCM_TRLX_CLEAR \
+ | OR_GPCM_EHTR_CLEAR)
+
+#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_FPGA1_BASE \
+ | BR_PS_16 /* 16 bit port */ \
+ | BR_MS_GPCM /* MSEL = GPCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_FPGA1_SIZE) \
+ | OR_UPM_XAM \
+ | OR_GPCM_CSNT \
+ | OR_GPCM_SCY_5 \
+ | OR_GPCM_TRLX_CLEAR \
+ | OR_GPCM_EHTR_CLEAR)
+
+#define CONFIG_SYS_FPGA_COUNT 2
+
+#define CONFIG_SYS_FPGA_PTR { \
+ (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, \
+ (struct ihs_fpga *)CONFIG_SYS_FPGA1_BASE }
+
+#define CONFIG_SYS_FPGA_NO_RFL_HI
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_ICS8N3QV01_I2C { 3, 6, 4, 7 }
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CONFIG_SYS_PCIE1_BASE 0xA0000000
+#define CONFIG_SYS_PCIE1_MEM_BASE 0xA0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA0000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000
+#define CONFIG_SYS_PCIE1_CFG_BASE 0xB0000000
+#define CONFIG_SYS_PCIE1_CFG_SIZE 0x01000000
+#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000
+
+/* enable PCIE clock */
+#define CONFIG_SYS_SCCR_PCIEXP1CM 1
+
+#define CONFIG_PCI_INDIRECT_BRIDGE
+#define CONFIG_PCIE
+
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1
+
+/*
+ * TSEC
+ */
+#define CONFIG_TSEC_ENET /* TSEC ethernet support */
+#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
+#define CONFIG_SYS_TSEC2_OFFSET 0x25000
+#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
+
+/*
+ * TSEC ethernet configuration
+ */
+#define CONFIG_MII 1 /* MII PHY management */
+
+#define CONFIG_TSEC1
+#define CONFIG_TSEC1_NAME "eTSEC0"
+#define TSEC1_PHY_ADDR 1
+#define TSEC1_PHYIDX 0
+#define TSEC1_FLAGS TSEC_GIGABIT
+
+#define CONFIG_TSEC2
+#define CONFIG_TSEC2_NAME "eTSEC1"
+#define TSEC2_PHY_ADDR 0
+#define TSEC2_PHYIDX 0
+#define TSEC2_FLAGS TSEC_GIGABIT
+
+/* Options are: eTSEC[0-1] */
+#define CONFIG_ETHPRIME "eTSEC0"
+
+/*
+ * Environment
+ */
+#if 1
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_PCI
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
+
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 256 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CONFIG_SYS_HID0_INIT 0x000000000
+#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
+ HID0_ENABLE_INSTRUCTION_CACHE | \
+ HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
+#define CONFIG_SYS_HID2 HID2_HBE
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
+
+/* IMMRBAR, PCI IO and FPGA: cache-inhibit and guarded */
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_RW | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \
+ BATU_VP)
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \
+ BATL_CACHEINHIBIT | \
+ BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \
+ BATL_CACHEINHIBIT | \
+ BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#endif
+
+#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm
*/
+
+#define CONFIG_HOSTNAME hrcon
+#define CONFIG_ROOTPATH "/opt/nfsroot"
+#define CONFIG_BOOTFILE "uImage"
+
+#define CONFIG_PREBOOT /* enable preboot variable */
+
+#define CONFIG_EXTRA_ENV_SETTINGS
\
+ "netdev=eth0\0" \
+ "consoledev=ttyS1\0" \
+ "u-boot=u-boot.bin\0" \
+ "kernel_addr=1000000\0" \
+ "fdt_addr=C00000\0" \
+ "fdtfile=hrcon.dtb\0" \
+ "load=tftp ${loadaddr} ${u-boot}\0" \
+ "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
+ " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
+ " +${filesize};cp.b ${fileaddr} " \
+ __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
+ "upd=run load update\0" \
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp ${kernel_addr} $bootfile;" \
+ "tftp ${fdt_addr} $fdtfile;" \
+ "bootm ${kernel_addr} - ${fdt_addr}"
+
+#define CONFIG_MMCBOOTCOMMAND \
+ "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "ext2load mmc 0:2 ${kernel_addr} $bootfile;" \
+ "ext2load mmc 0:2 ${fdt_addr} $fdtfile;" \
+ "bootm ${kernel_addr} - ${fdt_addr}"
+
+#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
+
+#endif /* __CONFIG_H */
diff --git a/include/fdt_fixup.h b/include/fdt_fixup.h
index 9390f0a633..f67685a789 100644
--- a/include/fdt_fixup.h
+++ b/include/fdt_fixup.h
@@ -1,4 +1,9 @@
struct of_board_fixup_data {
+#ifdef CONFIG_TARGET_GAZERBEAM
+ bool var_con;
+ bool mc4;
+ bool mc2;
+#endif
#ifdef CONFIG_TARGET_CONTROLCENTERDC
bool chip_exists[6];
#endif
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
