From: Philipp Rossak <embe...@gmail.com>

The sun8i emac hardware is present on the Nanopi M1.
It uses an external PHY.

Signed-off-by: Philipp Rossak <embe...@gmail.com>
---
 arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts 
b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
index 8ddd1b2..1cc9185 100644
--- a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -45,6 +45,18 @@
 / {
        model = "FriendlyArm NanoPi M1 Plus";
        compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
+
+       reg_gmac_3v3: gmac-3v3 {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&gmac_power_pin_nanopi_m1_plus>;
+               regulator-name = "gmac-3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               startup-delay-us = <100000>;
+               enable-active-high;
+               gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+       };
 };
 
 &ehci1 {
@@ -55,6 +67,15 @@
        status = "okay";
 };
 
+&emac {
+       /* The Nanopi M1 Plus uses an external phy */
+       pinctrl-names = "default";
+       pinctrl-0 = <&emac_rgmii_pins>;
+       phy-supply = <&reg_gmac_3v3>;
+       phy-mode = "rgmii";
+       /delete-property/allwinner,use-internal-phy;
+};
+
 &ohci1 {
        status = "okay";
 };
@@ -62,3 +83,12 @@
 &ohci2 {
        status = "okay";
 };
+
+&pio {
+       gmac_power_pin_nanopi_m1_plus: gmac_power_pin@0 {
+               allwinner,pins = "PD6";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+};
-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to