On Wed, Aug 30, 2017 at 6:02 AM, Philipp Rossak <embe...@gmail.com> wrote:
> From: Philipp Rossak <embe...@gmail.com>
>
> The sun8i emac hardware is present on the Nanopi M1.
> It uses the internal PHY.
>
> Signed-off-by: Philipp Rossak <embe...@gmail.com>
> ---
> arch/arm/dts/sun8i-h3-nanopi-m1.dts | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1.dts
> b/arch/arm/dts/sun8i-h3-nanopi-m1.dts
> index ec63d10..9c1c380 100644
> --- a/arch/arm/dts/sun8i-h3-nanopi-m1.dts
> +++ b/arch/arm/dts/sun8i-h3-nanopi-m1.dts
> @@ -55,6 +55,17 @@
> status = "okay";
> };
>
> +&emac {
> + phy = <&phy1>;
> + phy-mode = "mii";
> + allwinner,use-internal-phy;
> + allwinner,leds-active-low;
> + status = "okay";
> + phy1: ethernet-phy@1 {
> + reg = <1>;
> + };
> +};
We usually sync Linux for dts changes and I've seen few patches on
Linux, lets wait Linux to merge.
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
