Kever, I’ll try to get this in for the current release (i.e get it applied and send out a pull later this week), as it’s a defconfig-only bugfix for a regression introduced in the current release.
Regards, Philipp. > On 7 Sep 2017, at 05:30, Kever Yang <kever.y...@rock-chips.com> wrote: > > After the patch below, we need to add SPL_SYSRESET for do_reset() > in SPL: > 87c16d4 drivers: spl: consistently use the $(SPL_TPL_) macro > > Signed-off-by: Kever Yang <kever.y...@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> > --- > > configs/firefly-rk3399_defconfig | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/configs/firefly-rk3399_defconfig > b/configs/firefly-rk3399_defconfig > index d8ea4cb..eead166 100644 > --- a/configs/firefly-rk3399_defconfig > +++ b/configs/firefly-rk3399_defconfig > @@ -9,7 +9,6 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-firefly" > CONFIG_DEBUG_UART=y > CONFIG_FIT=y > CONFIG_SPL_LOAD_FIT=y > -CONFIG_ENV_IS_IN_MMC=y > CONFIG_SPL_FIT_GENERATOR="board/rockchip/evb_rk3399/mk_fit_atf.sh" > # CONFIG_DISPLAY_CPUINFO is not set > CONFIG_SPL_STACK_R=y > @@ -36,6 +35,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y > CONFIG_CMD_TIME=y > CONFIG_SPL_OF_CONTROL=y > CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names > interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > +CONFIG_ENV_IS_IN_MMC=y > CONFIG_REGMAP=y > CONFIG_SPL_REGMAP=y > CONFIG_SYSCON=y > @@ -70,6 +70,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000 > CONFIG_DEBUG_UART_SHIFT=2 > CONFIG_SYS_NS16550=y > CONFIG_SYSRESET=y > +CONFIG_SPL_SYSRESET=y > CONFIG_USB=y > CONFIG_USB_XHCI_HCD=y > CONFIG_USB_XHCI_DWC3=y > -- > 1.9.1 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot