On 09/04/2017 04:04 AM, Ran Wang wrote: > The default setting for USB High Speed Squelch Threshold results > in a threshold close to or lower than 100mV. This leads to Receiver > Compliance test failure for a 100mV threshold. > > Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE > to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test. > > Signed-off-by: Sriram Dash <sriram.d...@nxp.com> > Signed-off-by: Rajesh Bhagat <rajesh.bha...@nxp.com> > Signed-off-by: Suresh Gupta <suresh.gu...@nxp.com> > Signed-off-by: Ran Wang <ran.wan...@nxp.com> > --- > Change in v5: > Use scfg_clrbits32() instead. > > Change in v4: > Update commit message about register setting. > Clean up the math in set_usb_sqrxtune(). > Rename USB_TXVREFTUNE to SCFG_USB_TXVREFTUNE. > > Change in v3: > Use inline function to make code cleaner. > > Change in v2: > In function erratum_a009798(): > 1.Put a blank line after variable declaration. > 2.Move common code together.
Reordered Kconfig options. Applied to fsl-qoriq master. Thanks. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
