On 09/04/2017 04:04 AM, Ran Wang wrote: > USB High Speed (HS) EYE Height Adjustment > USB HS speed eye diagram fails with the default value at > many corners, particularly at a high temperature > > Optimal eye at TXREFTUNE value to 0x9 is observed, change > set the same value. > > Signed-off-by: Sriram Dash <sriram.d...@nxp.com> > Signed-off-by: Suresh Gupta <suresh.gu...@nxp.com> > Signed-off-by: Ran Wang <ran.wan...@nxp.com> > --- > Change in v4: > Use clrsetbits_be32() instead. > > Change in v4: > Change 1001 to 0x9 in the commit message to match the code. > Clean up the math in register setting. > Rename USB_TXVREFTUNE TO SCFG_USB_TXVREFTUNE. > > Change in v3: > - none > > Change in v2: > In function erratum_a009008(): > 1.Put a blank line after variable declaration. >
Reordered Kconfig options. Applied to fsl-qoriq master. Thanks. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
