Hi, My issue is with the eMMC after the boot from linux 3.12 and a warm reboot. The eMMC is stuck in an infinite loop after CMD8 small trace of the eMMC cmds sent:
Sending CMD0 Sending CMD8 dwmci_send_cmd: Response Timeout. Sending CMD55 dwmci_send_cmd: Response Timeout. Sending CMD0 Sending CMD1 Sending CMD1 Sending CMD0 Sending CMD1 Sending CMD1 Sending CMD2 Sending CMD3 Sending CMD9 Sending CMD7 Sending CMD8 Not sure is someone got the same behavior but i rollback to the Socfpga v2013.01.01 and everything is fine. I would investigate more later. Regards, Clement 2017-09-29 11:23 GMT+02:00 Goldschmidt Simon <sgoldschm...@de.pepperl-fuchs.com>: > Hi Clement, > >> Did you also test the saveenv and sf unlock ? > > Not yet. > >> Did you get some strange behaviors after a "warm reboot" from linux ? > > Unfortunately, I'm not that far, yet. My Linux image only uses the sd-card > for now. > > Regards, > Simon > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot