On Tue, Oct 10, 2017 at 1:21 AM, Marek Vasut <ma...@denx.de> wrote: > Add support for the DHCOM i.MX6 PDK board. This board has: > - FEC ethernet > - EHCI USB host > - 3x SDMMC > > Signed-off-by: Marek Vasut <ma...@denx.de> > Cc: Stefano Babic <sba...@denx.de> > --- > V2: Use get_cpu_type() and imx_get_mac_from_fuse() > --- > arch/arm/mach-imx/mx6/Kconfig | 10 + > board/dhelectronics/dh_imx6/Kconfig | 12 + > board/dhelectronics/dh_imx6/MAINTAINERS | 7 + > board/dhelectronics/dh_imx6/Makefile | 11 + > board/dhelectronics/dh_imx6/dh_imx6.c | 437 > ++++++++++++++++++++++++++++++ > board/dhelectronics/dh_imx6/dh_imx6_spl.c | 399 +++++++++++++++++++++++++++ > configs/dh_imx6_defconfig | 51 ++++ > include/configs/dh_imx6.h | 191 +++++++++++++ > 8 files changed, 1118 insertions(+) > create mode 100644 board/dhelectronics/dh_imx6/Kconfig > create mode 100644 board/dhelectronics/dh_imx6/MAINTAINERS > create mode 100644 board/dhelectronics/dh_imx6/Makefile > create mode 100644 board/dhelectronics/dh_imx6/dh_imx6.c > create mode 100644 board/dhelectronics/dh_imx6/dh_imx6_spl.c > create mode 100644 configs/dh_imx6_defconfig > create mode 100644 include/configs/dh_imx6.h > > diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig > index 540f2b29b1..b82db3af22 100644 > --- a/arch/arm/mach-imx/mx6/Kconfig > +++ b/arch/arm/mach-imx/mx6/Kconfig > @@ -129,6 +129,15 @@ config TARGET_COLIBRI_IMX6 > select DM_SERIAL > select DM_THERMAL > > +config TARGET_DHCOMIMX6 > + bool "dh_imx6" > + select BOARD_LATE_INIT > + select BOARD_EARLY_INIT_F > + select SUPPORT_SPL > + select DM > + select DM_THERMAL > + imply CMD_SPL
I would suggest to add new boards with DTS along with enabling dm-driven drivers, this would eventually improve i.MX tree toward using new feature set. thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot