On 10/10/2017 04:04 PM, Jagan Teki wrote: > On Tue, Oct 10, 2017 at 7:10 PM, Marek Vasut <ma...@denx.de> wrote: >> On 10/10/2017 03:32 PM, Jagan Teki wrote: >>> On Tue, Oct 10, 2017 at 1:21 AM, Marek Vasut <ma...@denx.de> wrote: >>>> Add support for the DHCOM i.MX6 PDK board. This board has: >>>> - FEC ethernet >>>> - EHCI USB host >>>> - 3x SDMMC >>>> >>>> Signed-off-by: Marek Vasut <ma...@denx.de> >>>> Cc: Stefano Babic <sba...@denx.de> >>>> --- >>>> V2: Use get_cpu_type() and imx_get_mac_from_fuse() >>>> --- >>>> arch/arm/mach-imx/mx6/Kconfig | 10 + >>>> board/dhelectronics/dh_imx6/Kconfig | 12 + >>>> board/dhelectronics/dh_imx6/MAINTAINERS | 7 + >>>> board/dhelectronics/dh_imx6/Makefile | 11 + >>>> board/dhelectronics/dh_imx6/dh_imx6.c | 437 >>>> ++++++++++++++++++++++++++++++ >>>> board/dhelectronics/dh_imx6/dh_imx6_spl.c | 399 >>>> +++++++++++++++++++++++++++ >>>> configs/dh_imx6_defconfig | 51 ++++ >>>> include/configs/dh_imx6.h | 191 +++++++++++++ >>>> 8 files changed, 1118 insertions(+) >>>> create mode 100644 board/dhelectronics/dh_imx6/Kconfig >>>> create mode 100644 board/dhelectronics/dh_imx6/MAINTAINERS >>>> create mode 100644 board/dhelectronics/dh_imx6/Makefile >>>> create mode 100644 board/dhelectronics/dh_imx6/dh_imx6.c >>>> create mode 100644 board/dhelectronics/dh_imx6/dh_imx6_spl.c >>>> create mode 100644 configs/dh_imx6_defconfig >>>> create mode 100644 include/configs/dh_imx6.h >>>> >>>> diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig >>>> index 540f2b29b1..b82db3af22 100644 >>>> --- a/arch/arm/mach-imx/mx6/Kconfig >>>> +++ b/arch/arm/mach-imx/mx6/Kconfig >>>> @@ -129,6 +129,15 @@ config TARGET_COLIBRI_IMX6 >>>> select DM_SERIAL >>>> select DM_THERMAL >>>> >>>> +config TARGET_DHCOMIMX6 >>>> + bool "dh_imx6" >>>> + select BOARD_LATE_INIT >>>> + select BOARD_EARLY_INIT_F >>>> + select SUPPORT_SPL >>>> + select DM >>>> + select DM_THERMAL >>>> + imply CMD_SPL >>> >>> I would suggest to add new boards with DTS along with enabling >>> dm-driven drivers, this would eventually improve i.MX tree toward >>> using new feature set. >> >> Enabling unused stuff and adding bloat ? Nope :) > > OK, but we still have useful stuff: > > DM_ETH > DM_GPIO > DM_I2C > DM_MMC > DM_SPI > DM_SPI_FLASH
This discussion is moot, it is NOT useful here and it just adds bloat. -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot