> To start porting I was planning to copy all the files of the board minnowmax and rename it with the name of our product. > I saw that minnowmax use FSP 1.0 exactly like Broadwell-DE. I hope that helps.
You might want to join Coreboot mailing list. I am 1000% sure this will help you far beyond your expectations. Zoran On Tue, Oct 10, 2017 at 2:29 PM, vnktux <vnk...@protonmail.com> wrote: > Hi Simon, > > Thanks for the info. I already have all the necessary blobs from the > current working implementation with Coreboot + U-Boot: FPS, ME, Microcode, > Flash Descriptor, VGA Rom. > > To start porting I was planning to copy all the files of the board > minnowmax and rename it with the name of our product. I saw that minnowmax > use FSP 1.0 exactly like Broadwell-DE. I hope that helps. > > Sent with [ProtonMail](https://protonmail.com) Secure Email. > > > -------- Original Message -------- > > Subject: Re: [U-Boot] Broadwell-DE bare metal > > Local Time: October 9, 2017 4:43 PM > > UTC Time: October 9, 2017 2:43 PM > > From: s...@chromium.org > > To: vnktux <vnk...@protonmail.com> > > u-boot@lists.denx.de <u-boot@lists.denx.de> > > > > Hi, > > > > On 3 October 2017 at 08:58, vnktux <vnk...@protonmail.com> wrote: > >> Hi all, > >> > >> For my graduation project my company asked to use U-Boot as bare metal > boot-loader on one of their product. The product in an embedded board with > a Xeon Broadwell-DE D-1527 Quad Core. The current boot-loader consist of > Coreboot + U-Boot, but of course they want to get rid of Coreboot. I have > almost no experience with U-Boot (Just with ARM processor a little bit) and > so far I don"t even know if it"s possible or not to achieve the final goal. > What I have understood is that I need the following binary blobs to work: > fsp.bin, vga.bin, descriptor.bin, me.bin, microcode.bin. Is it true? Can > somebody point me in the right direction because I am a little bit lost? > Plus I don"t see many x86 boards implemented in the source code of U-Boot. > > > > The original U-Boot payload support was done with Broadwell-DE (I"m > > not sure which one though). It allows U-Boot to boot from EFI. > > > > For what you want, yes you will need to obtain various binary blobs. > > Hopefully you can get the FSP from Intel, and with that the work > > required in U-Boot is probably not too large. Although I"m sure that > > the FSP API will have changed a little. > > > > Regards, > > Simon > > > >> > >> Best regards, > >> Vincenzo > >> > >> Sent with [ProtonMail](https://protonmail.com) Secure Email. > >> _______________________________________________ > >> U-Boot mailing list > >> U-Boot@lists.denx.de > >> https://lists.denx.de/listinfo/u-boot > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot