[U-Boot] [PATCH 15/20] i2c: uniphier-f: use clk for enable and get_rate

[Masahiro Yamada]

Get clock rate from the clock driver instead of hard-coding it.

Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---

 drivers/i2c/i2c-uniphier-f.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/i2c-uniphier-f.c b/drivers/i2c/i2c-uniphier-f.c
index eb6c9f3..6f45cc5 100644
--- a/drivers/i2c/i2c-uniphier-f.c
+++ b/drivers/i2c/i2c-uniphier-f.c
@@ -11,6 +11,7 @@
 #include <linux/iopoll.h>
 #include <linux/sizes.h>
 #include <linux/types.h>
+#include <clk.h>
 #include <dm.h>
 #include <i2c.h>
 #include <fdtdec.h>
@@ -61,8 +62,6 @@ struct uniphier_fi2c_regs {
 #define I2C_BRST_RSCLO (1 << 0)        /* release SCL low fixing */
 };
 
-#define FIOCLK 50000000
-
 struct uniphier_fi2c_priv {
        struct udevice *dev;
        struct uniphier_fi2c_regs __iomem *regs;        /* register base */
@@ -93,6 +92,8 @@ static int uniphier_fi2c_probe(struct udevice *dev)
 {
        fdt_addr_t addr;
        struct uniphier_fi2c_priv *priv = dev_get_priv(dev);
+       struct clk clk;
+       int ret;
 
        addr = devfdt_get_addr(dev);
        if (addr == FDT_ADDR_T_NONE)
@@ -102,7 +103,19 @@ static int uniphier_fi2c_probe(struct udevice *dev)
        if (!priv->regs)
                return -ENOMEM;
 
-       priv->fioclk = FIOCLK;
+       ret = clk_get_by_index(dev, 0, &clk);
+       if (ret < 0) {
+               dev_err(dev, "failed to get clock\n");
+               return ret;
+       }
+
+       ret = clk_enable(&clk);
+       if (ret) {
+               dev_err(dev, "failed to enable clock\n");
+               return ret;
+       }
+
+       priv->fioclk = clk_get_rate(&clk);
 
        priv->dev = dev;
 
-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot