Sync with Linux 4.14-rc4. (Include some DT updates queued up
for Linux 4.15.)
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
arch/arm/dts/uniphier-ld11.dtsi | 15 ++++--
arch/arm/dts/uniphier-ld20.dtsi | 97 ++++++++++++++++++++++++++++++++++++--
arch/arm/dts/uniphier-ld4-ref.dts | 4 ++
arch/arm/dts/uniphier-ld4.dtsi | 4 --
arch/arm/dts/uniphier-ld6b-ref.dts | 4 ++
arch/arm/dts/uniphier-pinctrl.dtsi | 15 ++++++
arch/arm/dts/uniphier-pro4.dtsi | 4 --
arch/arm/dts/uniphier-pro5.dtsi | 4 --
arch/arm/dts/uniphier-pxs2.dtsi | 51 ++++++++++++++++----
arch/arm/dts/uniphier-pxs3.dtsi | 4 --
arch/arm/dts/uniphier-sld8-ref.dts | 4 ++
arch/arm/dts/uniphier-sld8.dtsi | 4 --
12 files changed, 174 insertions(+), 36 deletions(-)
diff --git a/arch/arm/dts/uniphier-ld11.dtsi b/arch/arm/dts/uniphier-ld11.dtsi
index 0cc6fd7..2ac1bfc 100644
--- a/arch/arm/dts/uniphier-ld11.dtsi
+++ b/arch/arm/dts/uniphier-ld11.dtsi
@@ -118,7 +118,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
- clock-frequency = <58820000>;
};
serial1: serial@54006900 {
@@ -129,7 +128,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
- clock-frequency = <58820000>;
};
serial2: serial@54006a00 {
@@ -140,7 +138,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
- clock-frequency = <58820000>;
};
serial3: serial@54006b00 {
@@ -151,7 +148,17 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
- clock-frequency = <58820000>;
+ };
+
+ adamv@57920000 {
+ compatible = "socionext,uniphier-ld11-adamv",
+ "simple-mfd", "syscon";
+ reg = <0x57920000 0x1000>;
+
+ adamv_rst: reset {
+ compatible =
"socionext,uniphier-ld11-adamv-reset";
+ #reset-cells = <1>;
+ };
};
gpio: gpio@55000000 {
diff --git a/arch/arm/dts/uniphier-ld20.dtsi b/arch/arm/dts/uniphier-ld20.dtsi
index a7fdaa7..b74efb9 100644
--- a/arch/arm/dts/uniphier-ld20.dtsi
+++ b/arch/arm/dts/uniphier-ld20.dtsi
@@ -7,6 +7,8 @@
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
+#include <dt-bindings/thermal/thermal.h>
+
/memreserve/ 0x80000000 0x02000000;
/ {
@@ -46,6 +48,7 @@
clocks = <&sys_clk 32>;
enable-method = "psci";
operating-points-v2 = <&cluster0_opp>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
@@ -64,6 +67,7 @@
clocks = <&sys_clk 33>;
enable-method = "psci";
operating-points-v2 = <&cluster1_opp>;
+ #cooling-cells = <2>;
};
cpu3: cpu@101 {
@@ -173,6 +177,40 @@
<1 10 4>;
};
+ thermal-zones {
+ cpu_thermal {
+ polling-delay-passive = <250>; /* 250ms */
+ polling-delay = <1000>; /* 1000ms */
+ thermal-sensors = <&pvtctl>;
+
+ trips {
+ cpu_crit: cpu_crit {
+ temperature = <110000>; /* 110C */
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ cpu_alert: cpu_alert {
+ temperature = <100000>; /* 100C */
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device = <&cpu0
+ THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_alert>;
+ cooling-device = <&cpu2
+ THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -187,7 +225,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
- clock-frequency = <58820000>;
};
serial1: serial@54006900 {
@@ -198,7 +235,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
- clock-frequency = <58820000>;
};
serial2: serial@54006a00 {
@@ -209,7 +245,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
- clock-frequency = <58820000>;
};
serial3: serial@54006b00 {
@@ -220,7 +255,36 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
- clock-frequency = <58820000>;
+ };
+
+ adamv@57920000 {
+ compatible = "socionext,uniphier-ld20-adamv",
+ "simple-mfd", "syscon";
+ reg = <0x57920000 0x1000>;
+
+ adamv_rst: reset {
+ compatible =
"socionext,uniphier-ld20-adamv-reset";
+ #reset-cells = <1>;
+ };
+ };
+
+ gpio: gpio@55000000 {
+ compatible = "socionext,uniphier-gpio";
+ reg = <0x55000000 0x200>;
+ interrupt-parent = <&aidet>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 0>,
+ <&pinctrl 96 0 0>,
+ <&pinctrl 160 0 0>;
+ gpio-ranges-group-names = "gpio_range0",
+ "gpio_range1",
+ "gpio_range2";
+ ngpios = <205>;
+ socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+ <21 217 3>;
};
i2c0: i2c@58780000 {
@@ -383,6 +447,24 @@
};
};
+ soc-glue@5f900000 {
+ compatible = "socionext,uniphier-ld20-soc-glue-debug",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5f900000 0x2000>;
+
+ efuse@100 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x100 0x28>;
+ };
+
+ efuse@200 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x200 0x68>;
+ };
+ };
+
aidet: aidet@5fc20000 {
compatible = "socionext,uniphier-ld20-aidet";
reg = <0x5fc20000 0x200>;
@@ -417,6 +499,13 @@
watchdog {
compatible = "socionext,uniphier-wdt";
};
+
+ pvtctl: pvtctl {
+ compatible = "socionext,uniphier-ld20-thermal";
+ interrupts = <0 3 4>;
+ #thermal-sensor-cells = <0>;
+ socionext,tmod-calibration = <0x0f22 0x68ee>;
+ };
};
usb: usb@65b00000 {
diff --git a/arch/arm/dts/uniphier-ld4-ref.dts
b/arch/arm/dts/uniphier-ld4-ref.dts
index 0fd66e7..fb94df4 100644
--- a/arch/arm/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/dts/uniphier-ld4-ref.dts
@@ -68,3 +68,7 @@
&usb1 {
status = "okay";
};
+
+&nand {
+ status = "okay";
+};
diff --git a/arch/arm/dts/uniphier-ld4.dtsi b/arch/arm/dts/uniphier-ld4.dtsi
index 158beae..49fd25b 100644
--- a/arch/arm/dts/uniphier-ld4.dtsi
+++ b/arch/arm/dts/uniphier-ld4.dtsi
@@ -71,7 +71,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
- clock-frequency = <36864000>;
};
serial1: serial@54006900 {
@@ -82,7 +81,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
- clock-frequency = <36864000>;
};
serial2: serial@54006a00 {
@@ -93,7 +91,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
- clock-frequency = <36864000>;
};
serial3: serial@54006b00 {
@@ -104,7 +101,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
- clock-frequency = <36864000>;
};
gpio: gpio@55000000 {
diff --git a/arch/arm/dts/uniphier-ld6b-ref.dts
b/arch/arm/dts/uniphier-ld6b-ref.dts
index 926d37e..9b136b8 100644
--- a/arch/arm/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/dts/uniphier-ld6b-ref.dts
@@ -70,3 +70,7 @@
&usb1 {
status = "okay";
};
+
+&nand {
+ status = "okay";
+};
diff --git a/arch/arm/dts/uniphier-pinctrl.dtsi
b/arch/arm/dts/uniphier-pinctrl.dtsi
index d5e8aaf..a1b9a6c 100644
--- a/arch/arm/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/dts/uniphier-pinctrl.dtsi
@@ -23,6 +23,21 @@
function = "emmc";
};
+ pinctrl_ether_mii: ether_mii_grp {
+ groups = "ether_mii";
+ function = "ether_mii";
+ };
+
+ pinctrl_ether_rgmii: ether_rgmii_grp {
+ groups = "ether_rgmii";
+ function = "ether_rgmii";
+ };
+
+ pinctrl_ether_rmii: ether_rmii_grp {
+ groups = "ether_rmii";
+ function = "ether_rmii";
+ };
+
pinctrl_i2c0: i2c0_grp {
groups = "i2c0";
function = "i2c0";
diff --git a/arch/arm/dts/uniphier-pro4.dtsi b/arch/arm/dts/uniphier-pro4.dtsi
index ea97e26..9b82903 100644
--- a/arch/arm/dts/uniphier-pro4.dtsi
+++ b/arch/arm/dts/uniphier-pro4.dtsi
@@ -79,7 +79,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
- clock-frequency = <73728000>;
};
serial1: serial@54006900 {
@@ -90,7 +89,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
- clock-frequency = <73728000>;
};
serial2: serial@54006a00 {
@@ -101,7 +99,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
- clock-frequency = <73728000>;
};
serial3: serial@54006b00 {
@@ -112,7 +109,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
- clock-frequency = <73728000>;
};
gpio: gpio@55000000 {
diff --git a/arch/arm/dts/uniphier-pro5.dtsi b/arch/arm/dts/uniphier-pro5.dtsi
index 3be3acf..ac235ff 100644
--- a/arch/arm/dts/uniphier-pro5.dtsi
+++ b/arch/arm/dts/uniphier-pro5.dtsi
@@ -166,7 +166,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
- clock-frequency = <73728000>;
};
serial1: serial@54006900 {
@@ -177,7 +176,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
- clock-frequency = <73728000>;
};
serial2: serial@54006a00 {
@@ -188,7 +186,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
- clock-frequency = <73728000>;
};
serial3: serial@54006b00 {
@@ -199,7 +196,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
- clock-frequency = <73728000>;
};
gpio: gpio@55000000 {
diff --git a/arch/arm/dts/uniphier-pxs2.dtsi b/arch/arm/dts/uniphier-pxs2.dtsi
index dcb2515..a05df41 100644
--- a/arch/arm/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/dts/uniphier-pxs2.dtsi
@@ -7,6 +7,8 @@
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
+#include <dt-bindings/thermal/thermal.h>
+
/ {
compatible = "socionext,uniphier-pxs2";
#address-cells = <1>;
@@ -16,7 +18,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
@@ -24,9 +26,10 @@
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
+ #cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
@@ -36,7 +39,7 @@
operating-points-v2 = <&cpu_opp>;
};
- cpu@2 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
@@ -46,7 +49,7 @@
operating-points-v2 = <&cpu_opp>;
};
- cpu@3 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
@@ -114,6 +117,35 @@
};
};
+ thermal-zones {
+ cpu_thermal {
+ polling-delay-passive = <250>; /* 250ms */
+ polling-delay = <1000>; /* 1000ms */
+ thermal-sensors = <&pvtctl>;
+
+ trips {
+ cpu_crit: cpu_crit {
+ temperature = <95000>; /* 95C */
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ cpu_alert: cpu_alert {
+ temperature = <85000>; /* 85C */
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map {
+ trip = <&cpu_alert>;
+ cooling-device = <&cpu0
+ THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -141,7 +173,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
- clock-frequency = <88900000>;
};
serial1: serial@54006900 {
@@ -152,7 +183,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
- clock-frequency = <88900000>;
};
serial2: serial@54006a00 {
@@ -163,7 +193,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
- clock-frequency = <88900000>;
};
serial3: serial@54006b00 {
@@ -174,7 +203,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
- clock-frequency = <88900000>;
};
gpio: gpio@55000000 {
@@ -412,6 +440,13 @@
compatible = "socionext,uniphier-pxs2-reset";
#reset-cells = <1>;
};
+
+ pvtctl: pvtctl {
+ compatible = "socionext,uniphier-pxs2-thermal";
+ interrupts = <0 3 4>;
+ #thermal-sensor-cells = <0>;
+ socionext,tmod-calibration = <0x0f86 0x6844>;
+ };
};
usb0: usb@65b00000 {
diff --git a/arch/arm/dts/uniphier-pxs3.dtsi b/arch/arm/dts/uniphier-pxs3.dtsi
index a004bd1..cbab00b 100644
--- a/arch/arm/dts/uniphier-pxs3.dtsi
+++ b/arch/arm/dts/uniphier-pxs3.dtsi
@@ -146,7 +146,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
- clock-frequency = <58820000>;
};
serial1: serial@54006900 {
@@ -157,7 +156,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
- clock-frequency = <58820000>;
};
serial2: serial@54006a00 {
@@ -168,7 +166,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
- clock-frequency = <58820000>;
};
serial3: serial@54006b00 {
@@ -179,7 +176,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
- clock-frequency = <58820000>;
};
gpio: gpio@55000000 {
diff --git a/arch/arm/dts/uniphier-sld8-ref.dts
b/arch/arm/dts/uniphier-sld8-ref.dts
index 478ee0a..c94f0af 100644
--- a/arch/arm/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/dts/uniphier-sld8-ref.dts
@@ -72,3 +72,7 @@
&usb2 {
status = "okay";
};
+
+&nand {
+ status = "okay";
+};
diff --git a/arch/arm/dts/uniphier-sld8.dtsi b/arch/arm/dts/uniphier-sld8.dtsi
index a3693b0..f61d2ec 100644
--- a/arch/arm/dts/uniphier-sld8.dtsi
+++ b/arch/arm/dts/uniphier-sld8.dtsi
@@ -71,7 +71,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
- clock-frequency = <80000000>;
};
serial1: serial@54006900 {
@@ -82,7 +81,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
- clock-frequency = <80000000>;
};
serial2: serial@54006a00 {
@@ -93,7 +91,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
- clock-frequency = <80000000>;
};
serial3: serial@54006b00 {
@@ -104,7 +101,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
- clock-frequency = <80000000>;
};
gpio: gpio@55000000 {
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
