Le 24/11/2017 23:35, Simon Glass a écrit : > Hi Neil, > > On 22 November 2017 at 06:25, Neil Armstrong <narmstr...@baylibre.com> wrote: >> This adds platform code for the Libre Computer CC "Le Potato" board based on >> a >> Meson GXL (S905X) SoC with the Meson GXL configuration. >> >> This initial submission supports UART, MMC/SDCard and Ethernet with the >> Internal RMII PHY. >> >> The meson-gxl-s905x-libretech-cc.dts is synchronised from the linux 4.13 >> stable tree as of 4.13.8. >> >> Signed-off-by: Neil Armstrong <narmstr...@baylibre.com> >> --- >> arch/arm/dts/Makefile | 3 +- >> arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 171 >> ++++++++++++++++++++++++++ >> arch/arm/mach-meson/Kconfig | 9 ++ >> board/amlogic/libretech-cc/Kconfig | 12 ++ >> board/amlogic/libretech-cc/MAINTAINERS | 6 + >> board/amlogic/libretech-cc/Makefile | 8 ++ >> board/amlogic/libretech-cc/README | 96 +++++++++++++++ >> board/amlogic/libretech-cc/libretech-cc.c | 52 ++++++++ >> configs/libretech-cc_defconfig | 35 ++++++ >> include/configs/libretech-cc.h | 21 ++++ >> 10 files changed, 412 insertions(+), 1 deletion(-) >> create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc.dts >> create mode 100644 board/amlogic/libretech-cc/Kconfig >> create mode 100644 board/amlogic/libretech-cc/MAINTAINERS >> create mode 100644 board/amlogic/libretech-cc/Makefile >> create mode 100644 board/amlogic/libretech-cc/README >> create mode 100644 board/amlogic/libretech-cc/libretech-cc.c >> create mode 100644 configs/libretech-cc_defconfig >> create mode 100644 include/configs/libretech-cc.h >> > > Reviewed-by: Simon Glass <s...@chromium.org> > > > [..] > >> new file mode 100644 >> index 0000000..d0e3bbb >> --- /dev/null >> +++ b/board/amlogic/libretech-cc/Makefile >> @@ -0,0 +1,8 @@ >> +# >> +# (C) Copyright 2016 BayLibre, SAS >> +# Author: Neil Armstrong <narmstr...@baylibre.com> >> +# >> +# SPDX-License-Identifier: GPL-2.0+ >> +# >> + >> +obj-y := libretech-cc.o >> diff --git a/board/amlogic/libretech-cc/README >> b/board/amlogic/libretech-cc/README >> new file mode 100644 >> index 0000000..8b38fff >> --- /dev/null >> +++ b/board/amlogic/libretech-cc/README >> @@ -0,0 +1,96 @@ >> +U-Boot for LibreTech CC >> +======================= >> + >> +LibreTech CC is a single board computer manufactured by Libre Technology >> +with the following specifications: >> + >> + - Amlogic S905X ARM Cortex-A53 quad-core SoC @ 2GHz >> + - ARM Mali 450 GPU >> + - 2GB DDR3 SDRAM >> + - Gigabit Ethernet >> + - HDMI 2.0 4K/60Hz display >> + - 40-pin GPIO header >> + - 4 x USB 2.0 Host, 1 x USB OTG >> + - eMMC, microSD >> + - Infrared receiver >> + >> +Schematics are available on the manufacturer website. >> + >> +Currently the U-Boot port supports the following devices: >> + - serial >> + - eMMC, microSD >> + - Ethernet >> + >> +u-boot compilation > > U-Boot > >> +================== >> + >> + > export ARCH=arm >> + > export CROSS_COMPILE=aarch64-none-elf- >> + > make libretech-cc_defconfig >> + > make >> + >> +Image creation >> +============== >> + >> +Amlogic doesn't provide sources for the firmware and for tools needed >> +to create the bootloader image, so it is necessary to obtain them from >> +the git tree published by the board vendor: >> + >> + > wget >> https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + > wget >> https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz >> + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz >> + > export >> PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH >> + > git clone https://github.com/BayLibre/u-boot.git -b libretech-cc >> amlogic-u-boot >> + > cd amlogic-u-boot >> + > make libretech_cc_defconfig >> + > make >> + > export FIPDIR=$PWD/fip >> + >> +Go back to mainline U-Boot source tree then : >> + > mkdir fip >> + >> + > cp $FIPDIR/gxl/bl2.bin fip/ >> + > cp $FIPDIR/gxl/acs.bin fip/ >> + > cp $FIPDIR/gxl/bl21.bin fip/ >> + > cp $FIPDIR/gxl/bl30.bin fip/ >> + > cp $FIPDIR/gxl/bl301.bin fip/ >> + > cp $FIPDIR/gxl/bl31.img fip/ >> + > cp u-boot.bin fip/bl33.bin >> + >> + > $FIPDIR/blx_fix.sh \ >> + fip/bl30.bin \ >> + fip/zero_tmp \ >> + fip/bl30_zero.bin \ >> + fip/bl301.bin \ >> + fip/bl301_zero.bin \ >> + fip/bl30_new.bin \ >> + bl30 >> + >> + > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 >> + >> + > $FIPDIR/blx_fix.sh \ >> + fip/bl2_acs.bin \ >> + fip/zero_tmp \ >> + fip/bl2_zero.bin \ >> + fip/bl21.bin \ >> + fip/bl21_zero.bin \ >> + fip/bl2_new.bin \ >> + bl2 >> + >> + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin >> + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img >> + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin >> + > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output >> fip/bl2.n.bin.sig >> + > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ >> + --output fip/u-boot.bin \ >> + --bl2 fip/bl2.n.bin.sig \ >> + --bl30 fip/bl30_new.bin.enc \ >> + --bl31 fip/bl31.img.enc \ >> + --bl33 fip/bl33.bin.enc >> + >> +and then write the image to SD with: >> + >> + > DEV=/dev/your_sd_device >> + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 >> seek=1 >> + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > > I wonder if the above could be done with binman? It is designed for > putting images together.
Thanks for the tip, I'll have a look ! Neil > > Regards, > Simon > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot