On Tue, Dec 05, 2017 at 02:00:07PM +0800, Chen-Yu Tsai wrote: > The A33-OLinuXino defconfig was using the default CONS_INDEX value for > A33, which actually points to the R_UART, which is routed to the GPIO > header without proper pull-ups or diodes. The board has a separate > header for UART0, which are routed to pins PB0 and PB1. This header > is properly marked and is likely the first pins any user would try > to get a console. > > Fix CONS_INDEX in the defconfig so the console appears on UART0. > > Fixes: ca5c37026be4 ("sunxi: Add support for A33-OLinuXino board") > Signed-off-by: Chen-Yu Tsai <w...@csie.org>
Acked-by: Maxime Ripard <maxime.rip...@free-electrons.com> Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot