On Tue, Dec 5, 2017 at 3:11 PM, Maxime Ripard <maxime.rip...@free-electrons.com> wrote: > On Tue, Dec 05, 2017 at 02:00:07PM +0800, Chen-Yu Tsai wrote: >> The A33-OLinuXino defconfig was using the default CONS_INDEX value for >> A33, which actually points to the R_UART, which is routed to the GPIO >> header without proper pull-ups or diodes. The board has a separate >> header for UART0, which are routed to pins PB0 and PB1. This header >> is properly marked and is likely the first pins any user would try >> to get a console. >> >> Fix CONS_INDEX in the defconfig so the console appears on UART0. >> >> Fixes: ca5c37026be4 ("sunxi: Add support for A33-OLinuXino board") >> Signed-off-by: Chen-Yu Tsai <w...@csie.org> > > Acked-by: Maxime Ripard <maxime.rip...@free-electrons.com>
Applied to u-boot-sunxi/master _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot