Hi, On Tue, Dec 12, 2017 at 12:28:29PM +0530, Jagan Teki wrote: > USB-OTG require MUSB driver along with PHY#0 id(PH9) and/or > vbus pin(PH6) through AXP_GPIO driver. > > This patch add support for it. > > Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> > --- > configs/a64-olinuxino_defconfig | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/configs/a64-olinuxino_defconfig b/configs/a64-olinuxino_defconfig > index 63a0048..4c3fe75 100644 > --- a/configs/a64-olinuxino_defconfig > +++ b/configs/a64-olinuxino_defconfig > @@ -2,6 +2,9 @@ CONFIG_ARM=y > CONFIG_ARCH_SUNXI=y > CONFIG_MACH_SUN50I=y > CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y > +CONFIG_USB0_ID_DET="PH9" > +CONFIG_USB0_VBUS_DET="PH6" > +CONFIG_AXP_GPIO=y > CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino" > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > CONFIG_SPL=y > @@ -12,4 +15,5 @@ CONFIG_SPL=y > # CONFIG_SPL_EFI_PARTITION is not set > CONFIG_SUN8I_EMAC=y > CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_MUSB_GADGET=y
Same question, did you test the host mode? Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot