Hi, On Tue, Dec 12, 2017 at 2:58 PM, Jagan Teki <ja...@amarulasolutions.com> wrote: > This series deals axp803, musb and related improvements on a64 > - axp803 PMIC support used by a64 > - a64 musb improvements (rework by Philipp [1]) > - musb support for bananapi-m64, a64-olinuxino > > [1] https://patchwork.ozlabs.org/patch/729246/ > > Jagan Teki (11): > power: sunxi: add AXP803 PMIC support > sunxi: adjust usb bases between H3_H5 vs a64 > musb-new: sunxi: add common SUNXI_MUSB_BASE > sunxi: usb_phy: Update a64 sunxi_usb_phy base > arm64: allwinner: sync bananapi-m64 usb nodes from Linux > configs: sun50i: add usb-otg support for bananapi-m64 > configs: sun50i: enable ums on bananapi-m64 > arm64: allwinner: sync a64-olinuxino usb nodes from Linux > configs: sun50i: add usb-otg support for a64-olinuxino > configs: sun50i: enable ums on a64-olinuxino > configs: sun50i: Enable eMMC on a64-olinuxino > > Philipp Tomsich (5): > sunxi (sun50i): Set CONFIG_SUNXI_USB_PHYS to 2 (the A64 has 2 PHYs) > musb-new: sunxi: a64: add support to select shared phy > musb-new: sunxi: a64: adds support for clearing the SIDDP > usb: sunxi: set up usb_phy_passby only for HCI > sunxi: clock: update a64 usb clock gating and module reset bits
FYI I've been working on getting OTG working for the H3. There are quite a few similar things to change, which is where my musb patch came from. Alas I haven't been able to get it working in peripheral mode yet. I do have EHCI0/OHCI0 working for host mode though. ChenYu > > arch/arm/dts/sun50i-a64-bananapi-m64.dts | 27 +++ > arch/arm/dts/sun50i-a64-olinuxino.dts | 19 ++ > arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 16 +- > arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 6 + > arch/arm/include/asm/arch-sunxi/usb_phy.h | 2 + > arch/arm/mach-sunxi/Makefile | 9 + > arch/arm/mach-sunxi/pmic_bus.c | 9 +- > arch/arm/mach-sunxi/rsb.c | 2 +- > arch/arm/mach-sunxi/usb_phy.c | 24 ++- > board/sunxi/board.c | 40 ++++ > configs/a64-olinuxino_defconfig | 6 + > configs/bananapi_m64_defconfig | 4 + > drivers/power/Kconfig | 95 +++++++--- > drivers/power/Makefile | 3 + > drivers/power/axp803.c | 260 > ++++++++++++++++++++++++++ > drivers/usb/host/ehci-sunxi.c | 10 + > drivers/usb/host/ohci-sunxi.c | 10 + > drivers/usb/musb-new/musb_regs.h | 3 +- > drivers/usb/musb-new/sunxi.c | 24 ++- > include/axp803.h | 68 +++++++ > include/axp_pmic.h | 4 + > include/configs/sun50i.h | 2 +- > 22 files changed, 598 insertions(+), 45 deletions(-) > create mode 100644 drivers/power/axp803.c > create mode 100644 include/axp803.h > > -- > 2.7.4 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot