On Tue, Dec 12, 2017 at 11:56 PM, Marek Vasut <ma...@denx.de> wrote:
> On 12/12/2017 08:24 AM, Chen-Yu Tsai wrote:
>> Now that the musb sunxi glue driver is completely device model / device
>> tree driven, we should use the base address from the device tree,
>> instead of hard-coding it in the source code.
>>
>> Fixes: 3a61b080acee ("musb: sunxi: switch to the device model")
>> Signed-off-by: Chen-Yu Tsai <w...@csie.org>
>> ---
>> drivers/usb/musb-new/sunxi.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
>> index 7ee44ea91900..ae6a54118cd1 100644
>> --- a/drivers/usb/musb-new/sunxi.c
>> +++ b/drivers/usb/musb-new/sunxi.c
>> @@ -318,7 +318,7 @@ static int musb_usb_probe(struct udevice *dev)
>>
>> #ifdef CONFIG_USB_MUSB_HOST
>> host->host = musb_init_controller(&musb_plat, NULL,
>> - (void *)SUNXI_USB0_BASE);
>> + dev_read_addr_ptr(dev));
>
> What happens if dev_read_addr_ptr() returns some non-standard value?
You mean like an error value? That would likely be a signal that
the device tree is broken, like a missing property or invalid value,
or a corrupt device tree. In all cases I think blowing up should be
an expected result for a device tree driven driver?
ChenYu
>
>> if (!host->host)
>> return -EIO;
>>
>> @@ -326,7 +326,7 @@ static int musb_usb_probe(struct udevice *dev)
>> if (!ret)
>> printf("Allwinner mUSB OTG (Host)\n");
>> #else
>> - ret = musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
>> + ret = musb_register(&musb_plat, NULL, dev_read_addr_ptr(dev));
>> if (!ret)
>> printf("Allwinner mUSB OTG (Peripheral)\n");
>> #endif
>>
>
>
> --
> Best regards,
> Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
