The clock selection is done now from the am335x-fb code, so there is no more need doing this in the board code.
Signed-off-by: Hannes Schmelzer <oe5...@oevsv.at> --- board/BuR/brppt1/board.c | 3 --- board/BuR/brxre1/board.c | 2 -- 2 files changed, 5 deletions(-) diff --git a/board/BuR/brppt1/board.c b/board/BuR/brppt1/board.c index 6083479..9f7b2d9 100644 --- a/board/BuR/brppt1/board.c +++ b/board/BuR/brppt1/board.c @@ -120,9 +120,6 @@ void am33xx_spl_board_init(void) }; do_enable_clocks(clk_domains, clk_modules_tsspecific, 1); - /* setup LCD-Pixel Clock */ - writel(0x2, &cmdpll->clklcdcpixelclk); /* clock comes from perPLL M2 */ - /* setup I2C */ enable_i2c_pin_mux(); i2c_set_bus_num(0); diff --git a/board/BuR/brxre1/board.c b/board/BuR/brxre1/board.c index 856ac3d..e176b60 100644 --- a/board/BuR/brxre1/board.c +++ b/board/BuR/brxre1/board.c @@ -121,8 +121,6 @@ void am33xx_spl_board_init(void) 0 }; do_enable_clocks(clk_domains, clk_modules_xre1specific, 1); - /* setup LCD-Pixel Clock */ - writel(0x2, CM_DPLL + 0x34); /* power-OFF LCD-Display */ gpio_direction_output(LCD_PWR, 0); -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot