Hi Diego, On Wed, Jan 10, 2018 at 11:08:54AM -0200, Diego Dorta wrote: >Hi Peng, > >2018-01-10 3:20 GMT-02:00 Peng Fan <peng....@nxp.com>: >> This patchset is to add i.MX8M and i.MX8MQ-EVK support >> >> V5: >> Drop wait_mask_set/clr_timeout and switch to use readl_poll_timeout in >> the patchset. >> >> V4: >> Regenerate patchset based on Tom's master tree. >> In this patchset, https://patchwork.ozlabs.org/patch/855027/ >> "arm: imx: Rework i.MX specific commands to be excluded from SPL" from >> Tom is included to avoid merge conflicts because the i.mx8m change >> also has some modification to bootaux and arch/arm/mach-imx/Makefile. >> Because CONFIG_GPT_TIMER change, I did a small modification to apply >> Tom's patch, no function change. >> >> Include ATF link in README. >> >> V3: >> This patchset based on https://patchwork.ozlabs.org/patch/855027/ >> "arm: imx: Rework i.MX specific commands to be excluded from SPL" from >> Tom to avoid this patchset fail apply after Tom's patch merged. >> >> Previously "power: pmic/regulator allow dm be omited by SPL" broke other >> boards, in V3 patchset, only touch pfuze100 related options. >> >> Sharing code about get mac from fuse between mx7/mx8m >> Sharing code about bootaux between mx6/7/mx8m >> Sharing code about cpu speed grade between mx7/mx8m >> Sharing code about get boot device between mx7/mx8m >> Sharding code about mmc env between mx7/mx8m >> >> Introduce wait_mask_set/clr_timeout to avoid deadloop in clock pll >> configuration >> >> Correct authorship of fix building warning on fec arm64, patch 27/31. >> >> Switch to use structure for DDR Controller. For DDR PHY registers, >> there are about more than 10 thousands registers, I could not convert >> them with detailed register name, and the script is generated from IC team, >> So I use regs[0xxxxx] arrays here fo easily converting between IC team >> released script and uboot ddr phy cod. >> >> Improve REAMME file to include where to download firmware and imx-mkimage >> and how to build >> >> Add review tags on the V2 patchset. >> >> Hope this patchset could catch up next release :) >> >> V2: >> >> patch 02/23: convert to structure, drop is_boot_from_usb and >> disconnect_from_usb >> patch 04/23: conver to use structure for the clock driver, removed the >> CCM_xxx macros. Add static for local functons. >> Add init_usdhc_clk, init_uart_clk and etc to not enable >> them all at default. >> patch 05/23: Add more commit msg for the sip part. >> patch 08/23: Merge the spl boot device with i.MX7 >> patch 12/23: Typo fix and return error fix from Heiko for the SoC related >> part >> patch 22/23: Use a weak function ddr_init. If patch 23/23 could not be >> accepted at current stage, to make others still be could be >> compiled. >> >> The patchset depends on >> https://patchwork.ozlabs.org/patch/841934/ >> https://patchwork.ozlabs.org/patch/841958/ >> to be tested on real hardware. >> >> V1: >> >> patch: "power: pmic.h: include dm/ofnode.h" and >> "power: pmic/regulator allow dm be omited by SPL" is previously reviewed >> in mailist to not merged. If no issue, you may pick it up. >> >> The board support is a large patch because of the ddr related code. >> If it is not good, please first review/pick-up other patches if they >> are ok. >> >> >> >> Peng Fan (29): >> imx: add i.MX8M into Kconfig >> imx: mx8m: add register definition header file >> imx: mx8m: add pin header file >> imx: mx8m: add clock driver >> imx: add sip function >> imx: boot_mode: add USB_BOOT entry >> imx: cpu: update cpu file to support i.MX8M >> imx: spl: implement spl_boot_device for i.MX8M >> imx: add i.MX8MQ SoC Revision and is_mx8m helper >> imx: add pad settings bit definition for i.MX8M >> imx: cpu: move speed/temp to common cpu >> imx: cpu: add cpu speed/grade for i.MX8M >> imx: refactor imx_get_mac_from_fuse >> imx: cleanup bootaux >> imx: bootaux: support i.MX8M >> imx: mx7: move get_boot_device to cpu.c >> imx: cpu: support get_boot_device for i.MX8M >> imx: mx7: move mmc env code to mmc_env.c >> imx: mx8m: add soc related settings and files >> imx: makefile: compile files for i.MX8M >> misc: ocotp: add i.MX8M support >> mmc: fsl_esdhc: support i.MX8M >> imx: lcdif: include i.MX8M >> gpio: mxc: add i.MX8M support >> net: fec: do not access reserved register for i.MX8M >> imx: imx8mq: add dtsi file >> power: pmic/regulator allow dm be omitted by SPL >> imx: mx8m: add ddr controller memory map >> imx: add i.MX8MQ EVK support >> >> Tom Rini (1): >> arm: imx: Rework i.MX specific commands to be excluded from SPL > >Thanks for your V5 patches, this time I had no problem on compiling it. > >But, even following your README step by step, the U-Boot hangs >completely on this point: > >U-Boot SPL 2018.01-00038-gb464677cc7 (Jan 10 2018 - 09:50:45) >PMIC: PFUZE100 ID=0x10 >PMU message timeout
Seems needs larger time wait. Could you try static inline void poll_pmu_message_ready(void) { int ret; u32 val; /* * When BIT0 set to 0, the PMU has a message for the user * 10ms seems not enough for poll message, so use 1s here. */ ret = readl_poll_timeout(®s->reg[0xd0004], val, !(val & BIT(0)), 1000000); --> Change 1000000 to 0? if (ret) puts("PMU message timeout\n"); } in board/freescale/mx8mq_evk/ddr/ddrphy_train.c Not sure you are using latest B0 chip or not. I'll wait for comments before sending new version patchset. Thanks, Peng. >Normal Boot >Trying to boot from MMC2 > >Do you know how to solve it? If so, please add this information on the >README file. > >Thanks, >Diego >_______________________________________________ >U-Boot mailing list >U-Boot@lists.denx.de >https://lists.denx.de/listinfo/u-boot -- _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot