On 18/01/2018 02:24, Peng Fan wrote: > Hi Stefano, > > Do you have any comments on this v5 patchset? I would like this patchset > could catch up 2018.03.
Give me time until week-end, I cannot take a look before - thanks ! Regards, Stefano > > Thanks, > Peng. > >> -----Original Message----- >> From: Peng Fan >> Sent: Wednesday, January 10, 2018 1:20 PM >> To: sba...@denx.de; Fabio Estevam <fabio.este...@nxp.com> >> Cc: van.free...@gmail.com; u-boot@lists.denx.de; Peng Fan >> <peng....@nxp.com> >> Subject: [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK >> >> This patchset is to add i.MX8M and i.MX8MQ-EVK support >> >> V5: >> Drop wait_mask_set/clr_timeout and switch to use readl_poll_timeout in the >> patchset. >> >> V4: >> Regenerate patchset based on Tom's master tree. >> In this patchset, https://patchwork.ozlabs.org/patch/855027/ >> "arm: imx: Rework i.MX specific commands to be excluded from SPL" from >> Tom is included to avoid merge conflicts because the i.mx8m change also has >> some modification to bootaux and arch/arm/mach-imx/Makefile. >> Because CONFIG_GPT_TIMER change, I did a small modification to apply Tom's >> patch, no function change. >> >> Include ATF link in README. >> >> V3: >> This patchset based on https://patchwork.ozlabs.org/patch/855027/ >> "arm: imx: Rework i.MX specific commands to be excluded from SPL" from >> Tom to avoid this patchset fail apply after Tom's patch merged. >> >> Previously "power: pmic/regulator allow dm be omited by SPL" broke other >> boards, in V3 patchset, only touch pfuze100 related options. >> >> Sharing code about get mac from fuse between mx7/mx8m Sharing code >> about bootaux between mx6/7/mx8m Sharing code about cpu speed grade >> between mx7/mx8m Sharing code about get boot device between mx7/mx8m >> Sharding code about mmc env between mx7/mx8m >> >> Introduce wait_mask_set/clr_timeout to avoid deadloop in clock pll >> configuration >> >> Correct authorship of fix building warning on fec arm64, patch 27/31. >> >> Switch to use structure for DDR Controller. For DDR PHY registers, there >> are >> about more than 10 thousands registers, I could not convert them with >> detailed register name, and the script is generated from IC team, So I use >> regs[0xxxxx] arrays here fo easily converting between IC team released >> script >> and uboot ddr phy cod. >> >> Improve REAMME file to include where to download firmware and imx- >> mkimage and how to build >> >> Add review tags on the V2 patchset. >> >> Hope this patchset could catch up next release :) >> >> V2: >> >> patch 02/23: convert to structure, drop is_boot_from_usb and >> disconnect_from_usb >> patch 04/23: conver to use structure for the clock driver, removed the >> CCM_xxx macros. Add static for local functons. >> Add init_usdhc_clk, init_uart_clk and etc to not enable >> them all at default. >> patch 05/23: Add more commit msg for the sip part. >> patch 08/23: Merge the spl boot device with i.MX7 patch 12/23: Typo fix and >> return error fix from Heiko for the SoC related part patch 22/23: Use a weak >> function ddr_init. If patch 23/23 could not be >> accepted at current stage, to make others still be could be >> compiled. >> >> The patchset depends on >> https://patchwork.ozlabs.org/patch/841934/ >> https://patchwork.ozlabs.org/patch/841958/ >> to be tested on real hardware. >> >> V1: >> >> patch: "power: pmic.h: include dm/ofnode.h" and >> "power: pmic/regulator allow dm be omited by SPL" is previously reviewed in >> mailist to not merged. If no issue, you may pick it up. >> >> The board support is a large patch because of the ddr related code. >> If it is not good, please first review/pick-up other patches if they are ok. >> >> >> >> Peng Fan (29): >> imx: add i.MX8M into Kconfig >> imx: mx8m: add register definition header file >> imx: mx8m: add pin header file >> imx: mx8m: add clock driver >> imx: add sip function >> imx: boot_mode: add USB_BOOT entry >> imx: cpu: update cpu file to support i.MX8M >> imx: spl: implement spl_boot_device for i.MX8M >> imx: add i.MX8MQ SoC Revision and is_mx8m helper >> imx: add pad settings bit definition for i.MX8M >> imx: cpu: move speed/temp to common cpu >> imx: cpu: add cpu speed/grade for i.MX8M >> imx: refactor imx_get_mac_from_fuse >> imx: cleanup bootaux >> imx: bootaux: support i.MX8M >> imx: mx7: move get_boot_device to cpu.c >> imx: cpu: support get_boot_device for i.MX8M >> imx: mx7: move mmc env code to mmc_env.c >> imx: mx8m: add soc related settings and files >> imx: makefile: compile files for i.MX8M >> misc: ocotp: add i.MX8M support >> mmc: fsl_esdhc: support i.MX8M >> imx: lcdif: include i.MX8M >> gpio: mxc: add i.MX8M support >> net: fec: do not access reserved register for i.MX8M >> imx: imx8mq: add dtsi file >> power: pmic/regulator allow dm be omitted by SPL >> imx: mx8m: add ddr controller memory map >> imx: add i.MX8MQ EVK support >> >> Tom Rini (1): >> arm: imx: Rework i.MX specific commands to be excluded from SPL >> >> Ye Li (1): >> net: fec: fix build warnings for 64bits support >> >> arch/arm/Kconfig | 14 +- >> arch/arm/Makefile | 4 +- >> arch/arm/dts/Makefile | 2 + >> arch/arm/dts/fsl-imx8-ca53.dtsi | 92 ++ >> arch/arm/dts/fsl-imx8mq-evk.dts | 424 +++++++++ >> arch/arm/dts/fsl-imx8mq.dtsi | 429 +++++++++ >> arch/arm/include/asm/arch-imx/cpu.h | 6 +- >> arch/arm/include/asm/arch-mx6/imx-regs.h | 9 +- >> arch/arm/include/asm/arch-mx7/imx-regs.h | 18 +- >> arch/arm/include/asm/arch-mx8m/clock.h | 657 +++++++++++++ >> arch/arm/include/asm/arch-mx8m/crm_regs.h | 10 + >> arch/arm/include/asm/arch-mx8m/ddr.h | 365 ++++++++ >> arch/arm/include/asm/arch-mx8m/gpio.h | 12 + >> arch/arm/include/asm/arch-mx8m/imx-regs.h | 468 ++++++++++ >> arch/arm/include/asm/arch-mx8m/mx8mq_pins.h | 623 +++++++++++++ >> arch/arm/include/asm/arch-mx8m/sys_proto.h | 18 + >> arch/arm/include/asm/mach-imx/boot_mode.h | 10 + >> arch/arm/include/asm/mach-imx/iomux-v3.h | 22 +- >> arch/arm/include/asm/mach-imx/regs-lcdif.h | 10 +- >> arch/arm/include/asm/mach-imx/sys_proto.h | 4 + >> arch/arm/mach-imx/Makefile | 23 +- >> arch/arm/mach-imx/cpu.c | 130 ++- >> arch/arm/mach-imx/imx_bootaux.c | 51 +- >> arch/arm/mach-imx/mac.c | 61 ++ >> arch/arm/mach-imx/mmc_env.c | 30 + >> arch/arm/mach-imx/mx5/clock.c | 4 +- >> arch/arm/mach-imx/mx6/soc.c | 72 -- >> arch/arm/mach-imx/mx7/clock.c | 2 + >> arch/arm/mach-imx/mx7/soc.c | 195 ---- >> arch/arm/mach-imx/mx7ulp/clock.c | 2 + >> arch/arm/mach-imx/mx8m/Kconfig | 22 + >> arch/arm/mach-imx/mx8m/Makefile | 8 + >> arch/arm/mach-imx/mx8m/clock.c | 795 ++++++++++++++++ >> arch/arm/mach-imx/mx8m/clock_slice.c | 742 +++++++++++++++ >> arch/arm/mach-imx/mx8m/lowlevel_init.S | 63 ++ >> arch/arm/mach-imx/mx8m/soc.c | 227 +++++ >> arch/arm/mach-imx/sip.c | 23 + >> arch/arm/mach-imx/spl.c | 10 +- >> board/freescale/mx8mq_evk/Kconfig | 12 + >> board/freescale/mx8mq_evk/Makefile | 12 + >> board/freescale/mx8mq_evk/README | 47 + >> board/freescale/mx8mq_evk/ddr/ddr_init.c | 246 +++++ >> board/freescale/mx8mq_evk/ddr/ddrphy_train.c | 1272 >> ++++++++++++++++++++++++++ >> board/freescale/mx8mq_evk/ddr/helper.c | 101 ++ >> board/freescale/mx8mq_evk/mx8mq_evk.c | 156 ++++ >> board/freescale/mx8mq_evk/spl.c | 230 +++++ >> configs/mx8mq_evk_defconfig | 27 + >> drivers/gpio/mxc_gpio.c | 22 +- >> drivers/misc/mxc_ocotp.c | 7 + >> drivers/mmc/fsl_esdhc.c | 12 +- >> drivers/net/fec_mxc.c | 78 +- >> drivers/power/pmic/Makefile | 2 +- >> drivers/power/regulator/Makefile | 2 +- >> include/configs/mx8mq_evk.h | 269 ++++++ >> include/dt-bindings/clock/imx8mq-clock.h | 612 +++++++++++++ >> include/dt-bindings/pinctrl/pins-imx8mq.h | 632 +++++++++++++ >> include/imx_sip.h | 14 + >> 57 files changed, 9047 insertions(+), 363 deletions(-) create mode 100644 >> arch/arm/dts/fsl-imx8-ca53.dtsi create mode 100644 arch/arm/dts/fsl- >> imx8mq-evk.dts create mode 100644 arch/arm/dts/fsl-imx8mq.dtsi create >> mode 100644 arch/arm/include/asm/arch-mx8m/clock.h >> create mode 100644 arch/arm/include/asm/arch-mx8m/crm_regs.h >> create mode 100644 arch/arm/include/asm/arch-mx8m/ddr.h >> create mode 100644 arch/arm/include/asm/arch-mx8m/gpio.h >> create mode 100644 arch/arm/include/asm/arch-mx8m/imx-regs.h >> create mode 100644 arch/arm/include/asm/arch-mx8m/mx8mq_pins.h >> create mode 100644 arch/arm/include/asm/arch-mx8m/sys_proto.h >> create mode 100644 arch/arm/mach-imx/mac.c create mode 100644 >> arch/arm/mach-imx/mmc_env.c create mode 100644 arch/arm/mach- >> imx/mx8m/Kconfig create mode 100644 arch/arm/mach-imx/mx8m/Makefile >> create mode 100644 arch/arm/mach-imx/mx8m/clock.c create mode 100644 >> arch/arm/mach-imx/mx8m/clock_slice.c >> create mode 100644 arch/arm/mach-imx/mx8m/lowlevel_init.S >> create mode 100644 arch/arm/mach-imx/mx8m/soc.c create mode 100644 >> arch/arm/mach-imx/sip.c create mode 100644 >> board/freescale/mx8mq_evk/Kconfig create mode 100644 >> board/freescale/mx8mq_evk/Makefile >> create mode 100644 board/freescale/mx8mq_evk/README create mode >> 100644 board/freescale/mx8mq_evk/ddr/ddr_init.c >> create mode 100644 board/freescale/mx8mq_evk/ddr/ddrphy_train.c >> create mode 100644 board/freescale/mx8mq_evk/ddr/helper.c >> create mode 100644 board/freescale/mx8mq_evk/mx8mq_evk.c >> create mode 100644 board/freescale/mx8mq_evk/spl.c create mode 100644 >> configs/mx8mq_evk_defconfig create mode 100644 >> include/configs/mx8mq_evk.h create mode 100644 include/dt- >> bindings/clock/imx8mq-clock.h >> create mode 100644 include/dt-bindings/pinctrl/pins-imx8mq.h >> create mode 100644 include/imx_sip.h >> >> -- >> 2.14.1 > -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot