This patch tries to solve the problem described in following patch: https://patchwork.ozlabs.org/patch/796237/
The main argument against the above code was the potential lack of consistency if we boot SPL from the SD card (and then eMMC may load u-boot proper). This patch preserves this consistency if spl_boot_device() detects boot from either SD card or eMMC. It only will change boot device if boot from non-SD/eMMC device is detected - i.e SPI-NOR (as in this case). Signed-off-by: Lukasz Majewski <[email protected]> --- arch/arm/mach-imx/spl.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c index 6c16872f59..735d9f6261 100644 --- a/arch/arm/mach-imx/spl.c +++ b/arch/arm/mach-imx/spl.c @@ -134,7 +134,12 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) /* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */ u32 spl_boot_mode(const u32 boot_device) { - switch (spl_boot_device()) { + u32 spl_bd = spl_boot_device(); + + if (spl_bd != BOOT_DEVICE_MMC1) + spl_bd = boot_device; + + switch (spl_bd) { /* for MMC return either RAW or FAT mode */ case BOOT_DEVICE_MMC1: case BOOT_DEVICE_MMC2: -- 2.11.0 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
