Device tree for Stratix10 SoC
Signed-off-by: Chin Liang See <chin.liang....@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon....@intel.com>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/socfpga_stratix10_socdk.dts | 282 ++++++++++++++++++++++++++++++
2 files changed, 284 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/dts/socfpga_stratix10_socdk.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 62fbf32..61df5af 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -193,7 +193,8 @@ dtb-$(CONFIG_ARCH_SOCFPGA) +=
\
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb \
socfpga_cyclone5_sr1500.dtb \
- socfpga_cyclone5_vining_fpga.dtb
+ socfpga_cyclone5_vining_fpga.dtb \
+ socfpga_stratix10_socdk.dtb
dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb \
dra72-evm-revc.dtb dra71-evm.dtb dra76-evm.dtb
diff --git a/arch/arm/dts/socfpga_stratix10_socdk.dts
b/arch/arm/dts/socfpga_stratix10_socdk.dts
new file mode 100644
index 0000000..bcd34ac
--- /dev/null
+++ b/arch/arm/dts/socfpga_stratix10_socdk.dts
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+/dts-v1/;
+#include "skeleton.dtsi"
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+
+/ {
+ model = "Intel SOCFPGA Stratix 10 SoC Development Kit";
+ compatible = "altr,socfpga-stratix10", "altr,socfpga";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ aliases {
+ ethernet0 = &gmac0;
+ spi0 = &qspi;
+ i2c0 = &i2c;
+ spi1 = &spim0;
+ spi2 = &spim1;
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x0 0x80000000>; /* 2GB */
+ };
+
+ regulator_3_3v: 3-3-v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x3>;
+ };
+ };
+
+ intc: intc@fffc1000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0xfffc1000 0x1000>,
+ <0x0 0xfffc2000 0x2000>,
+ <0x0 0xfffc4000 0x2000>,
+ <0x0 0xfffc6000 0x2000>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ device_type = "soc";
+ ranges;
+ u-boot,dm-pre-reloc;
+
+ rst: rstmgr@ffd11000 {
+ #reset-cells = <1>;
+ compatible = "altr,rst-mgr";
+ reg = <0x0 0xffd11000 0x100>;
+ altr,modrst-offset = <0x20>;
+ };
+
+ gmac0: ethernet@ff800000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a",
+ "snps,dwmac";
+ reg = <0x0 0xff800000 0x2000>;
+ interrupts = <0 90 4>;
+ interrupt-names = "macirq";
+ interrupt-parent = <&intc>;
+ mac-address = [00 00 00 00 00 00];
+ resets = <&rst EMAC0_RESET>;
+ reset-names = "stmmaceth";
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>; /* probe for phy addr */
+ max-speed = <1000>;
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <1860>; /* 960ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ status = "okay";
+ };
+
+ mmc0: dwmmc0@0xff808000 {
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0x0 0xff808000 0x1000>;
+ interrupts = <0 96 4>;
+ interrupt-parent = <&intc>;
+ num-slots = <1>;
+ broken-cd;
+ bus-width = <4>;
+ fifo-depth = <0x400>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ drvsel = <3>;
+ smplsel = <0>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
+ };
+
+ uart0: serial0@ffc02000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0xffc02000 0x1000>;
+ interrupts = <0 108 4>;
+ interrupt-parent = <&intc>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ status = "okay";
+ };
+
+ usb0: usb@ffb00000 {
+ compatible = "snps,dwc2";
+ reg = <0x0 0xffb00000 0xffff>;
+ interrupts = <0 93 4>;
+ interrupt-parent = <&intc>;
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "okay";
+ };
+
+ qspi: spi@ff8d2000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cadence,qspi";
+ reg = <0x0 0xff8d2000 0x100>,
+ <0x0 0xff900000 0x100000>;
+ interrupts = <0 98 4>;
+ interrupt-parent = <&intc>;
+ sram-size = <1024>;
+ bus-num = <0>;
+ spi-max-frequency = <50000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ flash0: n25q1024a@0 {
+ u-boot,dm-pre-reloc;
+ compatible = "stmicro,n25q1024a";
+ reg = <0>; /* chip select */
+ spi-max-frequency = <50000000>;
+ page-size = <256>;
+ block-size = <16>; /* 2^16, 64KB */
+ tshsl-ns = <50>;
+ tsd2d-ns = <50>;
+ tchsh-ns = <4>;
+ tslch-ns = <4>;
+ };
+ };
+
+ i2c: i2c@ffc02900 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xffc02900 0x100>;
+ interrupts = <0 104 0x4>;
+ interrupt-parent = <&intc>;
+ status = "okay";
+ };
+
+ gpio0: gpio@ffc03200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0 0xffc03200 0x100>;
+ status = "disabled";
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ bank-name = "porta";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <24>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 110 4>;
+ interrupt-parent = <&intc>;
+ };
+ };
+
+ gpio1: gpio@ffc03300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0 0xffc03300 0x100>;
+ status = "okay";
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ bank-name = "portb";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <24>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 111 4>;
+ interrupt-parent = <&intc>;
+ };
+ };
+
+ spim0: spi@ffda4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-ssi";
+ reg = <0x0 0xffda4000 0x1000>;
+ interrupts = <0 99 4>;
+ interrupt-parent = <&intc>;
+ num-cs = <1>;
+ bus-num = <0>;
+ spi-max-frequency = <25000000>;
+ status = "okay";
+ };
+
+ spim1: spi@ffda5000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-ssi";
+ reg = <0x0 0xffda5000 0x1000>;
+ interrupts = <0 100 4>;
+ interrupt-parent = <&intc>;
+ num-cs = <1>;
+ bus-num = <0>;
+ spi-max-frequency = <25000000>;
+ status = "disabled";
+ };
+ };
+};
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
