Add misc support such as EMAC and cpu info printout for Stratix SoC
Signed-off-by: Chin Liang See <chin.liang....@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon....@intel.com>
---
arch/arm/mach-socfpga/Makefile | 1 +
arch/arm/mach-socfpga/misc_s10.c | 103 ++++++++++++++++++++++++++++++++++++++
2 files changed, 104 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-socfpga/misc_s10.c
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 910eb6f..b253914 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -32,6 +32,7 @@ endif
ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
obj-y += clock_manager_s10.o
+obj-y += misc_s10.o
obj-y += reset_manager_s10.o
obj-y += system_manager_s10.o
obj-y += wrap_pinmux_config_s10.o
diff --git a/arch/arm/mach-socfpga/misc_s10.c b/arch/arm/mach-socfpga/misc_s10.c
new file mode 100644
index 0000000..b1cc6ca
--- /dev/null
+++ b/arch/arm/mach-socfpga/misc_s10.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <altera.h>
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <watchdog.h>
+#include <asm/io.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/misc.h>
+#include <asm/pl310.h>
+#include <linux/libfdt.h>
+
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct socfpga_system_manager *sysmgr_regs =
+ (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+
+/*
+ * DesignWare Ethernet initialization
+ */
+#ifdef CONFIG_ETH_DESIGNWARE
+void dwmac_deassert_reset(const unsigned int of_reset_id,
+ const u32 phymode)
+{
+ /* Put the emac we're using into reset.
+ * This is required before configuring the PHY interface
+ */
+ socfpga_emac_manage_reset(of_reset_id, 1);
+
+ clrsetbits_le32(&sysmgr_regs->emac0 + (of_reset_id - EMAC0_RESET),
+ SYSMGR_EMACGRP_CTRL_PHYSEL_MASK,
+ phymode);
+
+ socfpga_emac_manage_reset(of_reset_id, 0);
+}
+#endif
+
+/*
+ * Print CPU information
+ */
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ puts("CPU: Intel FPGA SoCFPGA Platform\n");
+ puts("FPGA: Intel FPGA Stratix 10\n");
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_MISC_INIT
+int arch_misc_init(void)
+{
+ char qspi_string[13];
+
+ sprintf(qspi_string, "<0x%08x>", cm_get_qspi_controller_clk_hz());
+ env_set("qspi_clock", qspi_string);
+
+ return socfpga_eth_reset();
+}
+#endif
+
+int arch_early_init_r(void)
+{
+ return 0;
+}
+
+int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ if (argc != 2)
+ return CMD_RET_USAGE;
+
+ argv++;
+
+ switch (*argv[0]) {
+ case 'e': /* Enable */
+ socfpga_bridges_reset(1);
+ break;
+ case 'd': /* Disable */
+ socfpga_bridges_reset(0);
+ break;
+ default:
+ return CMD_RET_USAGE;
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(bridge, 2, 1, do_bridge,
+ "SoCFPGA HPS FPGA bridge control",
+ "enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
+ "bridge disable - Disable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA
bridges\n"
+ ""
+);
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
