When BOOT_FROM = FACTORY, then the LEG's factory setup is performed.
This code relies on boot_nfs u-boot command, so it shall be adjusted
appropriately (e.g. provide proper fitImage file).
Signed-off-by: Lukasz Majewski <lu...@denx.de>
---
include/configs/display5.h | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/include/configs/display5.h b/include/configs/display5.h
index 9cd2fdf683..67a1318e4f 100644
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -100,7 +100,11 @@
#define CONFIG_BAUDRATE 115200
#ifndef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "run boot_mmc"
+#define CONFIG_BOOTCOMMAND "if test ${BOOT_FROM} = FACTORY; then " \
+ "run factory_nfs;" \
+ "else " \
+ "run boot_mmc;" \
+ "fi"
#endif
#define PARTS_DEFAULT \
@@ -279,6 +283,9 @@
"up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
"download_kernel=" \
"tftpboot ${loadaddr} ${kernel_file};\0" \
+ "factory_nfs=" \
+ "echo BOOT: FACTORY (LEG);" \
+ "run boot_nfs\0" \
"boot_kernel_recovery=" KERNEL_RECOVERY_PROCEDURE "\0" \
"boot_swu_recovery=" SWUPDATE_RECOVERY_PROCEDURE "\0" \
"recovery=" \
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
