To test if this partition is present - one needs to write: display5 > sf probe; mtdparts display5 > sf erase factory +0x100000
Signed-off-by: Lukasz Majewski <lu...@denx.de> --- configs/display5_defconfig | 2 +- include/configs/display5.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/configs/display5_defconfig b/configs/display5_defconfig index db8212ca7c..03e9116676 100644 --- a/configs/display5_defconfig +++ b/configs/display5_defconfig @@ -48,7 +48,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=02008000.spi.1" -CONFIG_MTDPARTS_DEFAULT="mtdparts=02008000.spi.1:128k(SPL),1m(u-boot),64k(env1),64k(env2),8m(lin-recovery),4m(swu-kernel),8m(swu-initramfs),-(reserved)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=02008000.spi.1:128k(SPL),1m(u-boot),64k(env1),64k(env2),8m(lin-recovery),4m(swu-kernel),8m(swu-initramfs),1m(factory),-(reserved)" CONFIG_EFI_PARTITION=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y diff --git a/include/configs/display5.h b/include/configs/display5.h index 6d384d4de5..3bad7b52ea 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -33,6 +33,7 @@ * 0x140000 - 0x940000 : SPI.fitImage-recovery (8MiB) * 0x940000 - 0xD40000 : SPI.swupdate-kernel-FIT (4MiB) * 0xD40000 - 0x1540000 : SPI.swupdate-initramfs (8MiB) + * 0x1540000 - 0x1640000 : SPI.factory (1MiB) */ #ifndef CONFIG_SPL_BUILD -- 2.11.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot