Hi Feng, On Friday 19 February 2010 19:27:24 Feng Kan wrote: > Agreed the ordering is working now. Previously the ordering is 213 and with > CONFIG_MTD_NAND_ECC_SMC defined, wrong ECC error bit position was > calculated. What about the boards that are now stuck on the 213 ordering.
Which boards are stuck with this (incorrect) ordering? Please give an example. > Also in linux, the ordering is not fixed down as in u-boot. I thought we had this fixed (or synced) in U-Boot *and* Linux. > Hmm, perhaps > that is another approach to the problem. Fix the ordering in linux? Again, I fail to see the problem here. Please give an example which board is failing here. Thanks. Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: off...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot