On Sun, Jun 17, 2018 at 11:04 PM, Jagan Teki <jagannadh.t...@gmail.com> wrote: >> Do git pull and make sure you are at least at >> a715415bb5948c84cc44c601b193188990f7238b. > > Yes, I even tried on this, can't see any issue? Let me know If I still miss > any. > > U-Boot 2018.07-rc1-00165-ga715415bb5 (Jun 18 2018 - 11:28:28 +0530) > Allwinner Technology > > CPU: Allwinner A64 (SUN50I) > Model: BananaPi-M64 > DRAM: 2 GiB > MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 > Loading Environment from FAT... Unable to use mmc 1:3... Failed (-5) > In: serial > Out: serial > Err: serial > Allwinner mUSB OTG (Peripheral) > Net: > Warning: usb_ether using MAC address from ROM > eth0: usb_ether > starting USB... > USB0: USB EHCI 1.00 > USB1: USB OHCI 1.0 > USB2: USB EHCI 1.00 > USB3: USB OHCI 1.0 > scanning bus 0 for devices... 1 USB Device(s) found > scanning bus 2 for devices... 4 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > Hit any key to stop autoboot: 0 > => usb info > 1: Hub, USB Revision 2.0 > - u-boot EHCI Host Controller > - Class: Hub > - PacketSize: 64 Configurations: 1 > - Vendor: 0x0000 Product 0x0000 Version 1.0 > Configuration: 1 > - Interfaces: 1 Self Powered 0mA > Interface: 0 > - Alternate Setting 0, Endpoints: 1 > - Class Hub > - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms > > 1: Hub, USB Revision 2.0 > - u-boot EHCI Host Controller > - Class: Hub > - PacketSize: 64 Configurations: 1 > - Vendor: 0x0000 Product 0x0000 Version 1.0 > Configuration: 1 > - Interfaces: 1 Self Powered 0mA > Interface: 0 > - Alternate Setting 0, Endpoints: 1 > - Class Hub > - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms > > 2: Hub, USB Revision 2.0 > - USB 2.0 Hub > - Class: Hub > - PacketSize: 64 Configurations: 1 > - Vendor: 0x1a40 Product 0x0101 Version 1.17 > Configuration: 1 > - Interfaces: 1 Self Powered Remote Wakeup 100mA > Interface: 0 > - Alternate Setting 0, Endpoints: 1 > - Class Hub > - Endpoint 1 In Interrupt MaxPacket 1 Interval 12ms > > 3: Human Interface, USB Revision 1.10 > - Dell KB216 Wired Keyboard > - Class: (from Interface) Human Interface > - PacketSize: 8 Configurations: 1 > - Vendor: 0x413c Product 0x2113 Version 1.8 > Configuration: 1 > - Interfaces: 2 Bus Powered Remote Wakeup 100mA > Interface: 0 > - Alternate Setting 0, Endpoints: 1 > - Class Human Interface, Subclass: Boot Keyboard > - Endpoint 1 In Interrupt MaxPacket 8 Interval 24ms > Interface: 1 > - Alternate Setting 0, Endpoints: 1 > - Class Human Interface, Subclass: None > - Endpoint 2 In Interrupt MaxPacket 8 Interval 48ms
Leave this one plugged in. > 4: Human Interface, USB Revision 2.0 > - Logitech USB Receiver > - Class: (from Interface) Human Interface > - PacketSize: 32 Configurations: 1 > - Vendor: 0x046d Product 0xc52b Version 36.1 > Configuration: 1 > - Interfaces: 3 Bus Powered Remote Wakeup 98mA > - String: "RQR24.01_B0023" > Interface: 0 > - Alternate Setting 0, Endpoints: 1 > - Class Human Interface, Subclass: Boot Keyboard > - Endpoint 1 In Interrupt MaxPacket 8 Interval 8ms > Interface: 1 > - Alternate Setting 0, Endpoints: 1 > - Class Human Interface, Subclass: Boot Mouse > - Endpoint 2 In Interrupt MaxPacket 8 Interval 2ms > Interface: 2 > - Alternate Setting 0, Endpoints: 1 > - Class Human Interface, Subclass: None > - Endpoint 3 In Interrupt MaxPacket 32 Interval 2ms Unplug this one. Make sure that you have CONFIG_USB_KEYBOARD in your config and then run 'usb reset' (or try booting Linux). _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
