Hi! I am working on iMX515 processor in our project. Our evaluation board is iMX51EVK. We are using the uboot.
For our board we have designed the NAND as storage device! But for our NAND chip we dont have the Advanced toolkit (freescale s/w) support! So we have to load the uboot binary to DDR2 through JTAG emulator and boot the uboot!. When we are trying this on iMX51EVK board by removing the SD card, control is going to a infinite loop. The same binary is working if we store in the SD card of EVK board and boot! If we get the uboot running then we can store the uboot to NAND and proceed with our testing! It will be really helpful if you can help us in modifying the uboot such a way that it will boot from DDR2 itself. Thanks & Regards, Ramalingam C. Larsen & Toubro Ltd, Embedded System & Software (EmSyS), Mysore Complex, KIADB Industrial Area, Hebbal-Hootagalli, Mysore, Karnataka, India - 570018. Mobile : +91 9611417479 Mail : ramalinga...@lntemsys.com L&T EmSyS Proprietary L&T EmSyS Confidential L&T EmSyS Internal Use L&T EmSyS General Business "Your attempt may fail, but never fail to make an attempt.."
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot