> -----Original Message----- > From: u-boot-boun...@lists.denx.de > [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Ramalingam C > Sent: 2010年3月17日 22:34 > To: U-Boot@lists.denx.de > Subject: [U-Boot] Uboot debugging clarification! > > Hi! > > I am working on iMX515 processor in our project. Our > evaluation board is iMX51EVK. We are using the uboot. > > For our board we have designed the NAND as storage device! > But for our NAND chip we dont have the Advanced toolkit > (freescale s/w) support! So we > > have to load the uboot binary to DDR2 through JTAG emulator > and boot the uboot!. > > When we are trying this on iMX51EVK board by removing the SD > card, control > > is going to a infinite loop. What kind of ininite loop? Where code place is it? >The same binary is working if we store in the > SD card of EVK board and boot! > If we get the uboot running then we can store the uboot to > NAND and proceed with our testing! > > It will be really helpful if you can help us in modifying the > uboot such a way that it will boot from > DDR2 itself. You mean boot uboot via JTAG?
> > > Thanks & Regards, > Ramalingam C. > > Larsen & Toubro Ltd, > Embedded System & Software (EmSyS), > Mysore Complex, KIADB Industrial Area, > Hebbal-Hootagalli, > Mysore, Karnataka, > India - 570018. > > Mobile : +91 9611417479 > Mail : ramalinga...@lntemsys.com > > L&T EmSyS Proprietary L&T EmSyS Confidential L&T EmSyS > Internal Use L&T EmSyS General Business > > "Your attempt may fail, but never fail to make an attempt.." > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
