Hi Daniel, The 01/23/2019 17:38, Daniel Schwierzeck wrote: > > > Am 23.01.19 um 16:39 schrieb Horatiu Vultur: > > This patch series adds support for MSCC Serval SoC family. In this > > family there are the following boards: pcb105 and pcb106. > > > > This is based off the patch series[1]. > > > > [1] https://lists.denx.de/pipermail/u-boot/2019-January/355031.html > > > > Horatiu Vultur (5): > > pinctrl: mscc: Add gpio and pinctrl for Serval SoC family. > > MSCC: Add support for Serval SoC family. > > MSCC: add device tree for Serval pcb105 board > > MSCC: Add device tree for Serval pcb106 board > > MSCC: Add board support for Serval SoC family. > > > > is this a resend or an extension of your v2 series? > > Normally a resend is not necessary and should be annotated accordingly. > If this is an update, then you should have sent it as a v3 with a proper > changelog.
Well, it is none, it is a new patch series. The one in [1] is for ServalT while this patch series is for Serval. There are 2 different SoC families. [1] https://lists.denx.de/pipermail/u-boot/2019-January/355031.html > > -- > - Daniel -- /Horatiu _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot