Am 23.01.19 um 17:47 schrieb Horatiu Vultur: > Hi Daniel, > > The 01/23/2019 17:38, Daniel Schwierzeck wrote: >> >> >> Am 23.01.19 um 16:39 schrieb Horatiu Vultur: >>> This patch series adds support for MSCC Serval SoC family. In this >>> family there are the following boards: pcb105 and pcb106. >>> >>> This is based off the patch series[1]. >>> >>> [1] https://lists.denx.de/pipermail/u-boot/2019-January/355031.html >>> >>> Horatiu Vultur (5): >>> pinctrl: mscc: Add gpio and pinctrl for Serval SoC family. >>> MSCC: Add support for Serval SoC family. >>> MSCC: add device tree for Serval pcb105 board >>> MSCC: Add device tree for Serval pcb106 board >>> MSCC: Add board support for Serval SoC family. >>> >> >> is this a resend or an extension of your v2 series? >> >> Normally a resend is not necessary and should be annotated accordingly. >> If this is an update, then you should have sent it as a v3 with a proper >> changelog. > > Well, it is none, it is a new patch series. > The one in [1] is for ServalT while this patch series is for Serval. > There are 2 different SoC families. > > [1] https://lists.denx.de/pipermail/u-boot/2019-January/355031.html >> >> -- >> - Daniel >
ah sorry, but with the Patchwork font it's hard to note the difference between "MSCC: Add Servalt SoC family" and "MSCC: Add Serval SoC family" ;) -- - Daniel _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot